Linux下PostgreSQL數據庫故障的系統化排查Shell腳本分享

更新時間：2026年07月14日 09:18:48 作者：weixin_30777913

這篇文章主要為大家詳細介紹了Linux下PostgreSQL數據庫故障系統化診斷的腳本,文中的示例代碼講解詳細,具有一定的借鑒價值,感興趣的小伙伴可以了解下

前言

本文主要為大家分享一個Linux原生PostgreSQL(含pgvector向量庫)系統化故障排查腳本

適用：無Docker、系統直接安裝PostgreSQL，支持pgvector向量擴展專項檢測

用法：

root執行: sudo bash pg_vector_fault_diagnosis.sh -D /var/lib/pgsql/15/data -U postgres -p 5432
postgres用戶執行: ./pg_vector_fault_diagnosis.sh

特性：分段可單獨運行、自動緩存關鍵參數、向量索引專項校驗、只讀取證不修改數據庫

安全承諾：腳本僅采集日志/狀態，無任何自動修復、刪除、修改文件操作

完整代碼

#!/bin/bash
#===============================================================================
# 腳本名稱: pg_vector_fault_diagnosis.sh
# 
#===============================================================================
set -euo pipefail
# =====================【獨立可執行塊1：全局顏色、緩存、工具函數、入?yún)⒔馕觥?====================
# 顏色定義 高亮可復制參數
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
WHITE='\033[1;37m'
NC='\033[0m'
# 時間戳、取證緩存目錄
TIMESTAMP=$(date +%Y%m%d_%H%M%S)
DIAG_DIR="/tmp/pg_vector_diag_${TIMESTAMP}"
CACHE_FILE="${DIAG_DIR}/pg_param_cache.txt"
RECORD_LOG="${DIAG_DIR}/full_diagnose_record.log"
mkdir -p "$DIAG_DIR"
> "$CACHE_FILE"
> "$RECORD_LOG"
# 全局緩存變量（全腳本復用，執行后可復制）
PGDATA=""
PGUSER=""
PGPORT=""
POSTMASTER_PID=""
PG_LOG_PATH=""
CLUSTER_STATE=""
VECTOR_EXT_EXIST=false
# 基礎打印工具
now() { date '+%Y-%m-%d %H:%M:%S'; }
log_report() {
    echo "[$(now)] $*"
    echo "[$(now)] $*" >> "$RECORD_LOG"
}
success() { echo -e "${GREEN}[?] $1${NC}"; echo "[?] $1" >> "$RECORD_LOG"; }
warn() { echo -e "${YELLOW}[!] $1${NC}"; echo "[!] $1" >> "$RECORD_LOG"; }
error() { echo -e "${RED}[?] $1${NC}"; echo "[?] $1" >> "$RECORD_LOG"; }
# 打印可復制參數并存入緩存文件
print_copy_param() {
    local label="$1"
    local value="$2"
    echo -e "${WHITE}【可復制參數 | $label】${RED}$value${NC}"
    echo "$label=$value" >> "$CACHE_FILE"
}
# 輸出預填充參數的一鍵執行命令
quick_run_cmd() {
    echo -e "${YELLOW}?? 一鍵復制執行：$1${NC}"
    echo "快捷命令：$1" >> "$CACHE_FILE"
}
# 默認配置
PGDATA="${PGDATA:-/var/lib/pgsql/15/data}"
PGUSER="${PGUSER:-postgres}"
PGPORT="${PGPORT:-5432}"
# 解析命令行參數
while getopts "D:U:p:" opt; do
    case "$opt" in
        D) PGDATA="$OPTARG" ;;
        U) PGUSER="$OPTARG" ;;
        p) PGPORT="$OPTARG" ;;
        *) echo "用法: $0 [-D 數據目錄](méi) [-U 數據庫用戶] [-p 端口]" >&2; exit 1 ;;
    esac
done
# 緩存基礎入?yún)?
print_copy_param "PG數據目錄PGDATA" "$PGDATA"
print_copy_param "數據庫運行用戶PGUSER" "$PGUSER"
print_copy_param "數據庫監聽端口PGPORT" "$PGPORT"
# 自動切換postgres用戶執行核心檢測
if [[ $(id -un) != "$PGUSER" ]]; then
    if id "$PGUSER" &>/dev/null; then
        log_report "自動切換至$PGUSER用戶執行完整診斷"
        exec su -s /bin/bash "$PGUSER" -c "$0 -D $PGDATA -U $PGUSER -p $PGPORT"
    else
        error "用戶$PGUSER不存在，請手動切換postgres用戶運行腳本"
        exit 1
    fi
fi
# ==========================================================================================
# =====================【獨立可執行塊2：階段一 本體論：數據庫實體狀態全判定】=====================
log_report ""
log_report "========== 階段一：本體論狀態判定（區分PG進程/集群/端口/鎖文件實體） =========="
log_report "目標：精準劃分?jǐn)?shù)據庫6種故障狀態，區分普通崩潰/向量索引卡死/OOM假死"
# 1.1 systemd服務狀態
SERVICE_ACTIVE="inactive"
if systemctl list-unit-files | grep -qE "postgresql-[0-9]+\.service"; then
    SERVICE_ACTIVE=$(systemctl is-active postgresql-*.service 2>/dev/null || echo "inactive")
fi
print_copy_param "Systemd服務狀態" "$SERVICE_ACTIVE"
# 1.2 postmaster主進程PID緩存
POSTMASTER_PID=$(pgrep -f "postgres:.*postmaster" || echo "")
print_copy_param "PostgreSQL主進程PID" "$POSTMASTER_PID"
# 1.3 端口監聽檢測
PORT_OPEN="no"
if ss -tlnp | grep -q ":$PGPORT "; then
    PORT_OPEN="yes"
fi
print_copy_param "端口$PGPORT監聽狀態" "$PORT_OPEN"
# 1.4 數據目錄鎖文件檢測
PID_FILE_EXIST=false
if [[ -f "$PGDATA/postmaster.pid" ]]; then
    PID_FILE_EXIST=true
fi
print_copy_param "殘留postmaster.pid鎖文件" "$PID_FILE_EXIST"
# 1.5 六類故障狀態綜合判定
DB_STATE="unknown"
if [[ -n "$POSTMASTER_PID" && "$PORT_OPEN" == "yes" ]]; then
    DB_STATE="活躍運行態(Active) - 進程+端口正常，故障大概率為向量查詢卡死/慢索引構建"
elif [[ -n "$POSTMASTER_PID" ]]; then
    DB_STATE="阻塞假死態(Dying) - 進程存在但端口關閉，向量?jī)?nèi)存溢出阻塞、等待IO"
elif [[ "$SERVICE_ACTIVE" == "active" && -z "$POSTMASTER_PID" ]]; then
    DB_STATE="僵死態(Zombie) - systemd顯示運行但進程消失，磁盤只讀/權限崩潰"
elif $PID_FILE_EXIST; then
    DB_STATE="異常崩潰態(Crashed) - 非正常關閉，鎖文件殘留，向量索引損壞高發"
else
    DB_STATE="正常關閉態(CleanStop) - 無進程無鎖文件，人為停止或定時任務關閉"
fi
log_report "數據庫綜合判定狀態：$DB_STATE"
log_report "狀態明細：systemd=$SERVICE_ACTIVE PID=$POSTMASTER_PID 端口監聽=$PORT_OPEN 鎖文件=$PID_FILE_EXIST"
# 對應狀態快捷排查命令
if [[ "$DB_STATE" == "活躍運行態"* ]]; then
    quick_run_cmd "psql -U $PGUSER -p $PGPORT -c 'SELECT pid,state,wait_event,query FROM pg_stat_activity;'"
elif [[ "$DB_STATE" == "阻塞假死態"* ]]; then
    quick_run_cmd "kill -ABRT $POSTMASTER_PID; journalctl -u postgresql-* -n 200"
elif [[ "$DB_STATE" == "異常崩潰態"* ]]; then
    quick_run_cmd "pg_controldata $PGDATA"
fi
# ==========================================================================================
# =====================【獨立可執行塊3：階段二 奧卡姆剃刀：日志致命錯誤提?。ê琾gvector向量專屬錯誤）】=====================
log_report ""
log_report "========== 階段二：日志剃刀導航（包含pgvector向量索引專屬故障關鍵詞） =========="
# 自動定位日志文件
PG_LOG_PATH=""
TODAY_LOG="$PGDATA/log/postgresql-$(date +%a).log"
if [[ -f "$TODAY_LOG" ]]; then
    PG_LOG_PATH="$TODAY_LOG"
else
    PG_LOG_PATH=$(ls -t "$PGDATA"/log/postgresql-*.log 2>/dev/null | head -1 || echo "未找到日志文件")
fi
print_copy_param "PostgreSQL日志路徑" "$PG_LOG_PATH"
# 日志不存在則切換journalctl日志源
if [[ "$PG_LOG_PATH" == "未找到日志文件" || ! -f "$PG_LOG_PATH" ]]; then
    warn "本地日志目錄無文件，數據庫日志輸出至系統journald"
    quick_run_cmd "journalctl -u postgresql-* --no-pager -n 300 > ${DIAG_DIR}/pg_journal.log"
else
    log_report "采集日志文件：$PG_LOG_PATH"
fi
# 致命錯誤關鍵詞（擴展pgvector向量庫特有報錯）
CRITICAL_PATTERN='PANIC|FATAL|terminating|signal 9|No space left|Input/output error|checkpoint record|vector index|hnsw|ivfflat|pgvector|high dim memory|vector memory exhausted|cannot load index|index corrupt'
declare -a critical_errors
# 讀取最近200行日志匹配錯誤
if [[ -f "$PG_LOG_PATH" ]]; then
    while IFS= read -r line; do
        if echo "$line" | grep -qiE "$CRITICAL_PATTERN"; then
            critical_errors+=("$line")
        fi
    done < <(tail -200 "$PG_LOG_PATH" 2>/dev/null)
fi
# 打印提取的崩潰日志
if [[ ${#critical_errors[@]} -eq 0 ]]; then
    success "日志未匹配致命PANIC/FATAL/向量索引錯誤，轉向系統資源檢查"
    quick_run_cmd "grep -E '$CRITICAL_PATTERN' $PG_LOG_PATH"
else
    error "檢測到關鍵故障日志（含向量庫異常）："
    for err in "${critical_errors[@]}"; do
        echo "    $err"
    done
fi
# 標記故障大類（含向量專屬故障標記）
FOUND_OOM=0
FOUND_DISK_FULL=0
FOUND_IO_ERROR=0
FOUND_WAL_CORRUPT=0
FOUND_LOCK_FILE=0
FOUND_PERMISSION=0
FOUND_VECTOR_INDEX_ERR=0
FOUND_VECTOR_OOM=0
for err in "${critical_errors[@]}"; do
    # 通用PG故障
    if echo "$err" | grep -q "signal 9"; then FOUND_OOM=1; fi
    if echo "$err" | grep -q "No space left"; then FOUND_DISK_FULL=1; fi
    if echo "$err" | grep -q "I/O error"; then FOUND_IO_ERROR=1; fi
    if echo "$err" | grep -q "checkpoint record"; then FOUND_WAL_CORRUPT=1; fi
    if echo "$err" | grep -q "lock file.*exists"; then FOUND_LOCK_FILE=1; fi
    if echo "$err" | grep -q "Permission denied"; then FOUND_PERMISSION=1; fi
    # pgvector向量數據庫專屬故障
    if echo "$err" | grep -qE "vector index|hnsw|ivfflat|index corrupt|cannot load index"; then FOUND_VECTOR_INDEX_ERR=1; fi
    if echo "$err" | grep -qE "vector memory exhausted|high dim memory"; then FOUND_VECTOR_OOM=1; fi
done
# 緩存故障標記
print_copy_param "OOM內核殺死標記" "$FOUND_OOM"
print_copy_param "磁盤滿標記" "$FOUND_DISK_FULL"
print_copy_param "向量索引損壞標記" "$FOUND_VECTOR_INDEX_ERR"
print_copy_param "向量查詢內存溢出標記" "$FOUND_VECTOR_OOM"
# ==========================================================================================
# =====================【獨立可執行塊4：階段三 辯證法：定向資源檢查（向量?jī)?nèi)存/磁盤/內核OOM）】=====================
log_report ""
log_report "========== 階段三：辯證法定向資源排查（根據日志錯誤只檢查對應維度，減少無效采集） =========="
# 3.1 磁盤空間故障定向檢查
if [[ $FOUND_DISK_FULL -eq 1 ]]; then
    error "日志標記磁盤空間耗盡，檢查PG數據分區占用"
    df -h "$PGDATA" || true
    quick_run_cmd "du -sh $PGDATA/* | sort -rh | head -20"
    quick_run_cmd "du -sh $PGDATA/pg_wal"
fi
# 3.2 OOM內存殺死定向檢查（向量高維查詢極易觸發）
if [[ $FOUND_OOM -eq 1 || $FOUND_VECTOR_OOM -eq 1 ]]; then
    error "日志標記內存溢出（普通OOM/向量高維查詢內存耗盡），讀取內核OOM記錄"
    OOM_DMESG=$(dmesg -T | grep -i "killed process" | tail -10)
    if [[ -n "$OOM_DMESG" ]]; then echo "$OOM_DMESG"; fi
    quick_run_cmd "journalctl -k --no-pager | grep -i oom"
    quick_run_cmd "psql -U $PGUSER -p $PGPORT -c 'show work_mem; show shared_buffers; show max_parallel_workers_per_gather;'"
fi
# 3.3 磁盤IO硬件故障定向檢查
if [[ $FOUND_IO_ERROR -eq 1 ]]; then
    error "日志檢測磁盤IO硬件錯誤"
    dmesg | grep -iE "I/O error|ext4 error|remount ro" | tail -10 || true
    mount | grep "$PGDATA" || true
    quick_run_cmd "iostat -x 1 5"
fi
# 3.4 向量索引損壞專項檢查（pgvector獨有）
if [[ $FOUND_VECTOR_INDEX_ERR -eq 1 ]]; then
    error "檢測到向量索引損壞/加載失敗，執行向量索引健康檢測"
    log_report "向量索引修復前置檢查命令（只讀查詢，無修改）"
    quick_run_cmd "psql -U $PGUSER -p $PGPORT -c 'SELECT relname,relfilenode,relisreplicated FROM pg_class WHERE relam IN (SELECT oid FROM pg_am WHERE amname IN (''hnsw'',''ivfflat''));'"
    quick_run_cmd "reindex index 向量索引名; -- 停機后執行，修復損壞索引"
fi
# 3.5 無明確日志錯誤，執行極簡全局資源快照
if [[ $FOUND_OOM -eq 0 && $FOUND_DISK_FULL -eq 0 && $FOUND_IO_ERROR -eq 0 && $FOUND_VECTOR_INDEX_ERR -eq 0 ]]; then
    log_report "無定向日志錯誤，采集基礎系統資源快照"
    df -h "$PGDATA" 2>/dev/null || true
    free -h
    dmesg | grep -i "killed process" | tail -3 2>/dev/null || true
    ulimit -a
    sysctl kernel.shmmax vm.max_map_count
fi
# ==========================================================================================
# =====================【獨立可執行塊5：階段四 整體論：PG集群+pgvector向量擴展深度校驗】=====================
log_report ""
log_report "========== 階段四：整體論 集群元數據&pgvector向量擴展校驗 =========="
# 4.1 集群狀態 pg_controldata
CLUSTER_STATE="未知"
if command -v pg_controldata &>/dev/null && [[ -d "$PGDATA" ]]; then
    CONTROL_RAW=$(pg_controldata "$PGDATA" 2>&1) || true
    CLUSTER_STATE=$(echo "$CONTROL_RAW" | grep "Database cluster state:" | awk -F: '{print $NF}' | xargs)
    log_report "數據庫集群關閉狀態：$CLUSTER_STATE"
    print_copy_param "集群關機狀態" "$CLUSTER_STATE"
    if [[ "$CLUSTER_STATE" == *"shut down normally"* ]]; then
        success "上次數據庫正常關閉"
    elif [[ "$CLUSTER_STATE" == *"crash"* || "$CLUSTER_STATE" == *"recovery"* ]]; then
        warn "數據庫上次異常崩潰，啟動將執行WAL恢復"
    fi
else
    warn "無法讀取pg_controldata，數據目錄可能損壞/權限不足"
fi
# 4.2 數據目錄權限校驗
PGDATA_OWNER=$(stat -c '%U:%G' "$PGDATA" 2>/dev/null || echo "未知")
print_copy_param "PGDATA目錄屬主" "$PGDATA_OWNER"
if [[ "$PGDATA_OWNER" != "${PGUSER}:"* ]]; then
    error "數據目錄權限異常，運行用戶不匹配"
    quick_run_cmd "sudo chown -R $PGUSER:$PGUSER $PGDATA"
else
    success "數據目錄屬主權限正常"
fi
# 4.3 pgvector向量擴展專項檢測（向量庫核心）
log_report "檢測pgvector向量擴展安裝狀態"
VECTOR_EXT_EXIST=false
if psql -U "$PGUSER" -p "$PGPORT" -t -c "SELECT 1 FROM pg_extension WHERE extname='vector';" 2>/dev/null | grep -q 1; then
    VECTOR_EXT_EXIST=true
    success "pgvector向量擴展已安裝，支持hnsw/ivfflat向量索引"
    quick_run_cmd "psql -U $PGUSER -p $PGPORT -c '\dx vector'"
else
    warn "未檢測pgvector擴展，向量相關表/索引會啟動失敗"
    quick_run_cmd "CREATE EXTENSION IF NOT EXISTS vector; -- 數據庫內執行安裝"
fi
print_copy_param "pgvector擴展是否安裝" "$VECTOR_EXT_EXIST"
# 4.4 WAL預檢查（崩潰恢復核心）
if [[ $FOUND_WAL_CORRUPT -eq 1 ]]; then
    error "WAL日志檢測損壞風險，禁止直接啟動數據庫"
    log_report "辯證恢復選擇：1. PITR時間點恢復（無數據丟失） 2. pg_resetwal強制重置（丟失最近事務）"
    quick_run_cmd "sudo -u $PGUSER pg_resetwal -D $PGDATA -f"
fi
# ==========================================================================================
# =====================【獨立可執行塊6：階段五 實用主義：分層恢復方案（區分普通PG/向量庫故障）】=====================
log_report ""
log_report "========== 階段五：辯證分層恢復建議（普通數據庫 / pgvector向量索引故障分開方案） =========="
log_report "===== 一、通用數據庫故障恢復方案 ====="
if [[ $FOUND_DISK_FULL -eq 1 ]]; then
    log_report "1.磁盤滿故障：清理pg_wal歸檔/日志文件，擴容存儲，systemctl restart postgresql-*"
fi
if [[ $FOUND_OOM -eq 1 ]]; then
    log_report "2.全局OOM殺死：調整shared_buffers/work_mem，systemd配置OOMScoreAdjust=-1000"
fi
if [[ $FOUND_LOCK_FILE -eq 1 ]]; then
    log_report "3.殘留鎖文件：確認無postgres進程后 rm -f $PGDATA/postmaster.pid"
fi
if [[ $FOUND_PERMISSION -eq 1 ]]; then
    log_report "4.權限異常：chown -R postgres:postgres 整個PG數據目錄"
fi
if [[ "$DB_STATE" == "阻塞假死態"* ]]; then
    log_report "5.進程假死：kill -ABRT $POSTMASTER_PID 生成core堆棧，再重啟數據庫"
fi
log_report ""
log_report "===== 二、pgvector向量數據庫專屬故障恢復方案 ====="
if [[ $FOUND_VECTOR_OOM -eq 1 ]]; then
    log_report "向量查詢內存溢出：降低單條查詢向量維度、調小work_mem、限制并行向量檢索數量"
    quick_run_cmd "ALTER SYSTEM SET work_mem = '64MB'; SELECT pg_reload_conf();"
fi
if [[ $FOUND_VECTOR_INDEX_ERR -eq 1 ]]; then
    log_report "向量索引損壞恢復：停機后執行REINDEX INDEX 向量索引名；無法修復則重建索引"
    quick_run_cmd "REINDEX INDEX CONCURRENTLY 向量索引名; -- 在線輕量修復，業務低峰執行"
fi
log_report ""
log_report "===== 三、數據庫存活但向量查詢卡死排查 ====="
if [[ "$DB_STATE" == "活躍運行態"* ]]; then
    quick_run_cmd "psql -U $PGUSER -p $PGPORT -c 'SELECT pid,query,wait_event FROM pg_stat_activity WHERE query ILIKE ''%vector%'' OR query ILIKE ''%hnsw%'';'"
    quick_run_cmd "SELECT pg_terminate_backend(pid); -- 終止卡死的向量查詢會話"
fi
# ==========================================================================================
# =====================【獨立可執行塊7：階段六 道家無為：前置監控自愈加固方案】=====================
log_report ""
log_report "========== 階段六：無為前置加固（避免同類向量故障重復發生） =========="
cat << SELFHELP_TIPS
1. Systemd服務強制加固（防止OOM優先殺死PG）
    [Service]
    Restart=on-failure
    RestartSec=3
    OOMScoreAdjust=-1000
    LimitNOFILE=65536
2. pgvector向量庫專屬參數優化
    work_mem = 128MB  # 高維向量檢索調大，避免查詢OOM
    max_parallel_workers_per_gather = 2  # 限制向量索引并行構建，防止內存打滿
3. 監控告警配置（必加）
   - 磁盤使用率>85% 觸發告警
   - 日志匹配vector index corrupt / signal 9 實時告警
   - pg_stat_activity長時間向量查詢會話告警
4. 混沌演練：定期模擬磁盤滿、高維向量并發查詢，驗證自愈流程
5. 向量索引定時維護：業務低峰自動REINDEX，防止長期寫入導致索引損壞
SELFHELP_TIPS
# =====================【獨立可執行塊8：收尾：故障現場打包，參數緩存查看指引】=====================
log_report ""
log_report "========== 診斷收尾：故障現場全量歸檔 =========="
# 打包所有診斷快照
tar -czf "${DIAG_DIR}.tar.gz" -C /tmp "pg_vector_diag_${TIMESTAMP}" 2>/dev/null
success "? PostgreSQL+pgvector完整故障取證壓縮包生成完成"
print_copy_param "取證壓縮包完整路徑" "${DIAG_DIR}.tar.gz"
echo -e "\n${WHITE}【查看全部緩存參數（PID/日志/目錄/端口）執行命令】${RED}cat ${CACHE_FILE}${NC}"
quick_run_cmd "cat ${CACHE_FILE}"
log_report ""
success "PostgreSQL(pgvector向量庫)系統化故障診斷全部執行完成"
log_report "根因排查優先級：向量索引錯誤 > OOM內存溢出 > 磁盤空間耗盡 > WAL損壞 > IO硬件故障 > 權限問題"
# =====================【內置完整手工深度排查手冊，可單獨復制執行】=====================
: <<'MANUAL_GUIDE'
===============================================================================
# 手工深度排查全套命令（自動復用緩存參數，直接復制運行）
===============================================================================
# 1. 查看所有向量索引列表
psql -U $PGUSER -p $PGPORT -c "SELECT relname,amname FROM pg_class c JOIN pg_am a ON c.relam=a.oid WHERE a.amname IN ('hnsw','ivfflat');"
# 2. 導出數據庫全部向量表結構
pg_dump -U $PGUSER -p $PGPORT -s -f ${DIAG_DIR}/vector_table_schema.sql
# 3. 內核完整OOM日志檢索
journalctl -k --no-pager | grep -i 'killed process'
# 4. 抓取卡死向量查詢堆棧
gdb -p $POSTMASTER_PID --batch -ex "bt" > ${DIAG_DIR}/pg_stack_trace.log
# 5. 清理異常WAL文件（磁盤滿應急）
find $PGDATA/pg_wal -type f -mtime +7 -delete
# 6. 重啟數據庫服務
systemctl restart postgresql-*
===============================================================================
MANUAL_GUIDE

知識擴展

PostgreSQL 故障診斷腳本

這是一個用于 Linux 下 PostgreSQL 數據庫故障系統化診斷的 Shell 腳本。它能自動收集關鍵診斷信息，幫助 DBA 或系統管理員快速定位問題。

完整代碼如下：

#!/bin/bash
# ============================================================================
# PostgreSQL 故障系統化診斷腳本
# 用途：收集 PostgreSQL 運行狀態、配置、日志、系統資源等關鍵信息，用于故障排查
# 適用：Linux 系統，需有 psql 客戶端訪問權限（建議配置 .pgpass 或環境變量）
# 作者：DBA Team
# 版本：2026.07
# ============================================================================
# 設置輸出目錄
DIAG_DIR="/tmp/pg_diag_$(date +%Y%m%d_%H%M%S)"
mkdir -p "$DIAG_DIR"
# ============================================================================
# 連接參數（請根據實際環境修改）
# 優先使用環境變量，若未設置則使用默認值
# ============================================================================
export PGHOST="${PGHOST:-localhost}"
export PGPORT="${PGPORT:-5432}"
export PGUSER="${PGUSER:-postgres}"
export PGPASSWORD="${PGPASSWORD:-}"  # 建議使用 .pgpass 文件，避免明文
export PGDATABASE="${PGDATABASE:-postgres}"
# 若設置了 PGPASSWORD，則 psql 使用密碼；否則依賴 .pgpass 或信任連接
PSQL_CMD="psql -X -A -t -q"  # -X 忽略 .psqlrc，-A 取消對齊，-t 只顯示元組，-q 安靜
# 定義日志文件
DIAG_LOG="$DIAG_DIR/diagnostic.log"
exec > >(tee -a "$DIAG_LOG") 2>&1
echo "============================================================"
echo "PostgreSQL 診斷信息收集開始于: $(date)"
echo "診斷輸出目錄: $DIAG_DIR"
echo "連接參數: host=$PGHOST port=$PGPORT user=$PGUSER db=$PGDATABASE"
echo "============================================================"
# 輔助函數：執行 SQL 并輸出到文件
run_sql() {
    local sql="$1"
    local outfile="$2"
    if [ -z "$outfile" ]; then
        $PSQL_CMD -c "$sql" 2>/dev/null || echo "錯誤：無法執行 SQL（可能無法連接）"
    else
        $PSQL_CMD -c "$sql" > "$outfile" 2>/dev/null
        if [ $? -ne 0 ]; then
            echo "錯誤：無法執行 SQL，可能無法連接或權限不足" > "$outfile"
        fi
    fi
}
# 測試數據庫連接
echo ">>> 測試數據庫連接..."
if $PSQL_CMD -c "SELECT 1" >/dev/null 2>&1; then
    DB_CONNECTED=true
    echo "數據庫連接成功"
else
    DB_CONNECTED=false
    echo "警告：無法連接到數據庫，將跳過所有 SQL 查詢，僅收集系統級信息"
fi
echo ""
# 1. 系統基本信息
echo ">>> 1. 系統基本信息"
{
    echo "--- 操作系統 ---"
    uname -a
    echo "--- 發行版 ---"
    cat /etc/os-release 2>/dev/null || cat /etc/redhat-release 2>/dev/null
    echo "--- 內核參數 ---"
    sysctl kernel.hostname kernel.osrelease kernel.ostype 2>/dev/null
    echo "--- 負載 ---"
    uptime
    echo "--- 內存 ---"
    free -h
    echo "--- 磁盤使用 ---"
    df -h
    echo "--- 文件系統掛載 ---"
    mount | grep -E 'ext|xfs|btrfs|zfs'
} > "$DIAG_DIR/system_info.txt"
cat "$DIAG_DIR/system_info.txt"
echo ""
# 2. PostgreSQL 版本及運行狀態（僅當連接成功時）
if [ "$DB_CONNECTED" = true ]; then
    echo ">>> 2. PostgreSQL 版本及運行狀態"
    run_sql "SELECT version();" "$DIAG_DIR/version.txt"
    cat "$DIAG_DIR/version.txt"
    echo ""
    run_sql "SHOW data_directory;" "$DIAG_DIR/datadir.txt"
    echo "數據目錄: $(cat "$DIAG_DIR/datadir.txt")"
    echo ""
    run_sql "SHOW config_file;" "$DIAG_DIR/config_file.txt"
    echo "配置文件: $(cat "$DIAG_DIR/config_file.txt")"
    echo ""
    run_sql "SHOW hba_file;" "$DIAG_DIR/hba_file.txt"
    echo "pg_hba.conf: $(cat "$DIAG_DIR/hba_file.txt")"
    echo ""
    run_sql "SELECT pg_postmaster_start_time();" "$DIAG_DIR/start_time.txt"
    echo "啟動時間: $(cat "$DIAG_DIR/start_time.txt")"
    echo ""
    run_sql "SELECT pg_is_in_recovery();" "$DIAG_DIR/is_recovery.txt"
    echo "是否處于恢復模式: $(cat "$DIAG_DIR/is_recovery.txt")"
    echo ""
fi
# 3. PostgreSQL 配置文件（過濾注釋和空行）
echo ">>> 3. PostgreSQL 配置文件內容"
# 獲取配置文件路徑
CONF_FILE=""
if [ "$DB_CONNECTED" = true ]; then
    CONF_FILE=$(psql -X -t -c "SHOW config_file;" 2>/dev/null | head -1 | xargs)
fi
if [ -f "$CONF_FILE" ]; then
    grep -v '^#' "$CONF_FILE" | grep -v '^$' > "$DIAG_DIR/postgresql.conf"
    echo "配置文件內容已保存至: $DIAG_DIR/postgresql.conf"
    cat "$DIAG_DIR/postgresql.conf"
else
    echo "無法獲取配置文件，嘗試查找常見位置..."
    for f in /etc/postgresql/*/main/postgresql.conf /var/lib/pgsql/data/postgresql.conf /usr/local/var/postgres/postgresql.conf; do
        if [ -f "$f" ]; then
            grep -v '^#' "$f" | grep -v '^$' > "$DIAG_DIR/postgresql.conf"
            echo "找到配置文件: $f，內容已保存"
            cat "$DIAG_DIR/postgresql.conf"
            break
        fi
    done
fi
echo ""
# 4. 關鍵性能視圖查詢（僅當連接成功時）
if [ "$DB_CONNECTED" = true ]; then
    echo ">>> 4. 關鍵性能視圖"
    # 4.1 當前連接數
    echo "--- 當前連接統計 ---"
    run_sql "SELECT state, count(*) FROM pg_stat_activity GROUP BY state;" "$DIAG_DIR/connection_stats.txt"
    cat "$DIAG_DIR/connection_stats.txt"
    echo ""
    # 4.2 長時間運行的事務（超過5分鐘）
    echo "--- 長時間運行的事務（超過5分鐘） ---"
    run_sql "SELECT pid, usename, application_name, client_addr, state, query_start, now() - query_start AS duration, substr(query, 1, 100) FROM pg_stat_activity WHERE state != 'idle' AND now() - query_start > interval '5 minutes' ORDER BY query_start;" "$DIAG_DIR/long_txns.txt"
    cat "$DIAG_DIR/long_txns.txt"
    echo ""
    # 4.3 鎖等待
    echo "--- 鎖等待信息 ---"
    run_sql "SELECT blocked_locks.pid AS blocked_pid, blocked_activity.usename AS blocked_user, blocking_locks.pid AS blocking_pid, blocking_activity.usename AS blocking_user, blocked_activity.query AS blocked_statement, blocking_activity.query AS blocking_statement FROM pg_locks blocked_locks JOIN pg_stat_activity blocked_activity ON blocked_activity.pid = blocked_locks.pid JOIN pg_locks blocking_locks ON blocking_locks.locktype = blocked_locks.locktype AND blocking_locks.DATABASE IS NOT DISTINCT FROM blocked_locks.DATABASE AND blocking_locks.relation IS NOT DISTINCT FROM blocked_locks.relation AND blocking_locks.page IS NOT DISTINCT FROM blocked_locks.page AND blocking_locks.tuple IS NOT DISTINCT FROM blocked_locks.tuple AND blocking_locks.virtualxid IS NOT DISTINCT FROM blocked_locks.virtualxid AND blocking_locks.transactionid IS NOT DISTINCT FROM blocked_locks.transactionid AND blocking_locks.classid IS NOT DISTINCT FROM blocked_locks.classid AND blocking_locks.objid IS NOT DISTINCT FROM blocked_locks.objid AND blocking_locks.objsubid IS NOT DISTINCT FROM blocked_locks.objsubid AND blocking_locks.pid != blocked_locks.pid JOIN pg_stat_activity blocking_activity ON blocking_activity.pid = blocking_locks.pid WHERE NOT blocked_locks.granted;" "$DIAG_DIR/lock_waits.txt"
    cat "$DIAG_DIR/lock_waits.txt"
    echo ""
    # 4.4 活動查詢（非空閑）
    echo "--- 當前活動查詢（前20個） ---"
    run_sql "SELECT pid, usename, application_name, client_addr, state, query_start, now() - query_start AS duration, substr(query, 1, 200) FROM pg_stat_activity WHERE state != 'idle' AND pid != pg_backend_pid() ORDER BY query_start LIMIT 20;" "$DIAG_DIR/active_queries.txt"
    cat "$DIAG_DIR/active_queries.txt"
    echo ""
    # 4.5 復制狀態（如果啟用）
    echo "--- 復制狀態 ---"
    run_sql "SELECT application_name, client_addr, state, sync_state, sent_lsn, write_lsn, flush_lsn, replay_lsn, write_lag, flush_lag, replay_lag FROM pg_stat_replication;" "$DIAG_DIR/replication.txt"
    cat "$DIAG_DIR/replication.txt"
    echo ""
    # 4.6 數據庫大小和統計
    echo "--- 數據庫大小和統計 ---"
    run_sql "SELECT pg_database.datname, pg_size_pretty(pg_database_size(pg_database.datname)) AS size, pg_stat_database.tup_returned, pg_stat_database.tup_fetched, pg_stat_database.tup_inserted, pg_stat_database.tup_updated, pg_stat_database.tup_deleted, pg_stat_database.xact_commit, pg_stat_database.xact_rollback, pg_stat_database.deadlocks FROM pg_database LEFT JOIN pg_stat_database ON pg_database.oid = pg_stat_database.datid WHERE pg_database.datallowconn = true ORDER BY pg_database_size(pg_database.datname) DESC;" "$DIAG_DIR/db_stats.txt"
    cat "$DIAG_DIR/db_stats.txt"
    echo ""
    # 4.7 表大?。ㄇ?0）
    echo "--- 最大的20個表（含索引） ---"
    run_sql "SELECT schemaname, tablename, pg_size_pretty(pg_total_relation_size(schemaname||'.'||tablename)) AS total_size, pg_size_pretty(pg_relation_size(schemaname||'.'||tablename)) AS table_size, pg_size_pretty(pg_indexes_size(schemaname||'.'||tablename)) AS index_size FROM pg_tables WHERE schemaname NOT IN ('pg_catalog', 'information_schema') ORDER BY pg_total_relation_size(schemaname||'.'||tablename) DESC LIMIT 20;" "$DIAG_DIR/largest_tables.txt"
    cat "$DIAG_DIR/largest_tables.txt"
    echo ""
    # 4.8 索引使用統計（未使用的索引）
    echo "--- 可能未使用的索引（掃描次數少） ---"
    run_sql "SELECT schemaname, tablename, indexname, idx_scan, idx_tup_read, idx_tup_fetch FROM pg_stat_user_indexes WHERE idx_scan < 100 ORDER BY idx_scan LIMIT 20;" "$DIAG_DIR/unused_indexes.txt"
    cat "$DIAG_DIR/unused_indexes.txt"
    echo ""
    # 4.9 死鎖和沖突
    echo "--- 死鎖和沖突統計 ---"
    run_sql "SELECT datname, deadlocks, confl_tablespace, confl_lock, confl_snapshot, confl_bufferpin, confl_deadlock FROM pg_stat_database WHERE deadlocks > 0 OR confl_lock > 0 OR confl_deadlock > 0;" "$DIAG_DIR/deadlocks.txt"
    cat "$DIAG_DIR/deadlocks.txt"
    echo ""
fi
# 5. 日志文件（最近100行）
echo ">>> 5. PostgreSQL 日志文件（最近100行）"
LOG_DIR=""
if [ "$DB_CONNECTED" = true ]; then
    LOG_DIR=$(psql -X -t -c "SHOW log_directory;" 2>/dev/null | head -1 | xargs)
    LOG_FILE=$(psql -X -t -c "SHOW log_filename;" 2>/dev/null | head -1 | xargs)
fi
if [ -n "$LOG_DIR" ] && [ -n "$LOG_FILE" ]; then
    # 處理相對路徑
    if [[ "$LOG_DIR" != /* ]]; then
        LOG_DIR="$PGDATA/$LOG_DIR"
    fi
    LOG_PATH="$LOG_DIR/$LOG_FILE"
    # 如果找不到，嘗試使用模式匹配
    if [ ! -f "$LOG_PATH" ]; then
        LOG_PATH=$(find "$LOG_DIR" -name "*.log" -type f -printf "%T@ %p\n" | sort -nr | head -1 | awk '{print $2}')
    fi
    if [ -f "$LOG_PATH" ]; then
        echo "日志文件: $LOG_PATH"
        tail -n 100 "$LOG_PATH" > "$DIAG_DIR/postgresql.log"
        cat "$DIAG_DIR/postgresql.log"
    else
        echo "未找到日志文件"
    fi
else
    echo "無法從數據庫獲取日志配置，嘗試常見位置..."
    for f in /var/log/postgresql/*.log /var/lib/pgsql/data/log/*.log /usr/local/var/postgres/log/*.log; do
        if [ -f "$f" ]; then
            echo "找到日志文件: $f"
            tail -n 100 "$f" > "$DIAG_DIR/postgresql.log"
            cat "$DIAG_DIR/postgresql.log"
            break
        fi
    done
fi
echo ""
# 6. 系統資源使用情況（PostgreSQL相關進程）
echo ">>> 6. 系統資源使用"
{
    echo "--- PostgreSQL 進程 ---"
    ps aux | grep -E 'postgres|pg_ctl' | grep -v grep
    echo ""
    echo "--- CPU 和內存使用 ---"
    top -b -n 1 | head -n 20
    echo ""
    echo "--- 磁盤 I/O ---"
    iostat -x 1 3 2>/dev/null || echo "iostat 未安裝"
} > "$DIAG_DIR/system_resources.txt"
cat "$DIAG_DIR/system_resources.txt"
echo ""
# 7. 數據目錄磁盤使用
echo ">>> 7. 數據目錄磁盤使用"
PGDATA_DIR=""
if [ "$DB_CONNECTED" = true ]; then
    PGDATA_DIR=$(psql -X -t -c "SHOW data_directory;" 2>/dev/null | head -1 | xargs)
fi
if [ -d "$PGDATA_DIR" ]; then
    echo "數據目錄: $PGDATA_DIR"
    du -sh "$PGDATA_DIR" 2>/dev/null
    echo "前10個子目錄大小:"
    du -h --max-depth=1 "$PGDATA_DIR" 2>/dev/null | sort -hr | head -n 10
else
    echo "未找到數據目錄，嘗試常見位置..."
    for d in /var/lib/pgsql/data /var/lib/postgresql/*/main /usr/local/var/postgres; do
        if [ -d "$d" ]; then
            echo "找到數據目錄: $d"
            du -sh "$d" 2>/dev/null
            du -h --max-depth=1 "$d" 2>/dev/null | sort -hr | head -n 10
            break
        fi
    done
fi
echo ""
# 8. 網絡連接（PostgreSQL 端口）
echo ">>> 8. PostgreSQL 端口連接數"
PGPORT_ACTUAL="${PGPORT:-5432}"
ss -tunap | grep -c ":$PGPORT_ACTUAL " > "$DIAG_DIR/port_conn_count.txt"
echo "當前連接數: $(cat "$DIAG_DIR/port_conn_count.txt")"
ss -tunap | grep ":$PGPORT_ACTUAL " | head -n 20 > "$DIAG_DIR/port_connections.txt"
cat "$DIAG_DIR/port_connections.txt"
echo ""
# 9. 打包所有收集的文件
echo "============================================================"
echo "診斷信息收集完成，輸出目錄: $DIAG_DIR"
tar -czf "$DIAG_DIR.tar.gz" -C /tmp "$(basename "$DIAG_DIR")"
echo "打包文件: $DIAG_DIR.tar.gz"
echo "請將打包文件發送給 DBA 進行分析。"
echo "============================================================"
# 退出前提示
echo "注意：部分信息可能包含敏感數據，請妥善保管。"
exit 0

使用方法

將腳本保存為 collect_pg_diag.sh，并賦予執行權限：

chmod +x collect_pg_diag.sh

配置連接參數（可選）：

通過環境變量設置：export PGHOST=localhost PGPORT=5432 PGUSER=postgres PGPASSWORD=yourpass PGDATABASE=postgres
或使用 ~/.pgpass 文件（推薦，更安全）。
若使用默認 Unix socket 和當前系統用戶，可不必設置。

執行腳本：

./collect_pg_diag.sh

獲取結果：腳本會在 /tmp 下生成形如 pg_diag_YYYYMMDD_HHMMSS.tar.gz 的壓縮包，包含所有診斷文件。

到此這篇關于Linux下PostgreSQL數據庫故障的系統化排查Shell腳本分享的文章就介紹到這了,更多相關PostgreSQL數據庫故障排查內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: