192.168.1.11 k8s-master01 # 2C2G 40G
192.168.1.12 k8s-master02 # 2C2G 40G
192.168.1.13 k8s-master03 # 2C2G 40G
192.168.1.100 k8s-lb      # VIP 
192.168.1.14 k8s-node01   # 2C2G 40G
192.168.1.15 k8s-node02   # 2C2G 40G

cat /etc/redhat-release 
CentOS Linux release 7.9.2009 (Core)

echo '192.168.1.11 k8s-master01
192.168.1.12 k8s-master02
192.168.1.13 k8s-master03
192.168.1.100 k8s-lb 
192.168.1.14 k8s-node01
192.168.1.15 k8s-node02 ' >> /etc/hosts

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo

#安裝依賴包
yum install -y yum-utils   device-mapper-persistent-data   lvm2
#設置Docker源
yum-config-manager     --add-repo     https://download.docker.com/linux/centos/docker-ce.repo

systemctl disable --now firewalld 
systemctl disable --now dnsmasq
systemctl disable --now NetworkManager

setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

swapoff -a
#永久禁用
#若需要重啟后也生效，在禁用swap后還需修改配置文件/etc/fstab，注釋swap
sed -i.bak '/swap/s/^/#/' /etc/fstab

# 設置時區
 timedatectl set-timezone "Asia/Shanghai"

# 安裝ntpdate
rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpm
yum install ntpdate -y

# 所有節點同步時間。時間同步配置如下：
ntpdate time2.aliyun.com

# 加入到crontab
*/5 * * * * /usr/sbin/ntpdate time2.aliyun.com

echo "* soft nofile 65536" >> /etc/security/limits.conf
echo "* hard nofile 65536" >> /etc/security/limits.conf
echo "* soft nproc 65536"  >> /etc/security/limits.conf
echo "* hard nproc 65536"  >> /etc/security/limits.conf
echo "* soft  memlock  unlimited"  >> /etc/security/limits.conf
echo "* hard memlock  unlimited"  >> /etc/security/limits.conf

 ssh-keygen -t rsa  #一路回車

for i in k8s-master01 k8s-master02 k8s-master03 k8s-node01 k8s-node02;do ssh-copy-id -i .ssh/id_rsa.pub $i;done

# 導入ELRepo倉庫的公共密鑰
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
# 安裝ELRepo倉庫的yum源
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm

# 所有節點安裝內核
yum --enablerepo=elrepo-kernel -y install kernel-ml kernel-ml-devel

# 查看都有哪些內核
cat /boot/grub2/grub.cfg |grep menuentry

# 設置默認內核（這兩個命令都是設置默認內核的，按需求選擇。）
grub2-set-default "CentOS Linux (3.10.0-327.el7.x86_64) 7 (Core)"
grub2-set-default 0

# 查看默認啟動那個內核
grub2-editenv list

# 最后重啟服務器并查看是否為最新版內核
reboot 
uname -r

yum install ipvsadm ipset sysstat conntrack libseccomp -y
# 所有節點配置ipvs模塊，在內核4.19+版本nf_conntrack_ipv4已經改為nf_conntrack， 4.18以下使用nf_conntrack_ipv4即可：
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack

echo 'ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip ' > /etc/modules-load.d/ipvs.conf
systemctl enable --now systemd-modules-load.service

lsmod | grep -e ip_vs -e nf_conntrack

# nf_conntrack_ipv4      16384  23 
# nf_defrag_ipv4         16384  1 nf_conntrack_ipv4
# nf_conntrack          135168  10 # xt_conntrack,nf_conntrack_ipv6,nf_conntrack_ipv4,nf_nat,nf_nat_ipv6,ipt_MASQUERADE,nf_nat_ipv4,xt_nat,nf_conntrack_netlink,ip_vs

cat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
net.ipv4.conf.all.route_localnet = 1

vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720

net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF
sysctl --system

reboot
lsmod | grep --color=auto -e ip_vs -e nf_conntrack

yum -y  install  containerd.io-20.10.*  docker-ce-20.10.* docker-cli-20.10.* 

mkdir /etc/docker
# 由于新版kubelet建議使用systemd，所以可以把docker的CgroupDriver改成systemd
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"]
}
EOF

# 所有節點設置開機自啟動Docker
systemctl daemon-reload && systemctl enable --now docker

# K8S安裝包
wget https://dl.k8s.io/v1.20.15/kubernetes-server-linux-amd64.tar.gz

# etcd安裝包
wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz

#解壓kubernetes安裝文件
tar -xf kubernetes-server-linux-amd64.tar.gz  --strip-components=3 -C /usr/local/bin kubernetes/server/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy}

# 解壓etcd安裝文件
tar -zxvf etcd-v3.4.13-linux-amd64.tar.gz --strip-components=1 -C /usr/local/bin etcd-v3.4.13-linux-amd64/etcd{,ctl}

kubelet --version
etcdctl version

MasterNodes='k8s-master02 k8s-master03'
WorkNodes='k8s-node01 k8s-node02'
for NODE in $MasterNodes; do echo $NODE; scp /usr/local/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy} $NODE:/usr/local/bin/; scp /usr/local/bin/etcd* $NODE:/usr/local/bin/; done
for NODE in $WorkNodes; do     scp /usr/local/bin/kube{let,-proxy} $NODE:/usr/local/bin/ ; done

mkdir -p /opt/cni/bin

wget "https://pkg.cfssl.org/R1.2/cfssl_linux-amd64" -O /usr/bin/cfssl
wget "https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64" -O /usr/bin/cfssljson
chmod +x /usr/bin/cfssl /usr/bin/cfssljson

# 創建文件夾
mkdir -p /root/k8s/pki

# admin-csr.json
cat <<EOF > ./admin-csr.json
{
  "CN": "admin",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:masters",
      "OU": "Kubernetes-manual"
    }
  ]
}
EOF

# apiserver-csr.json
cat <<EOF > ./apiserver-csr.json
{
  "CN": "kube-apiserver",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "Kubernetes",
      "OU": "Kubernetes-manual"
    }
  ]
}
EOF

# ca-config.json
cat <<EOF > ./ca-config.json
{
  "signing": {
    "default": {
      "expiry": "876000h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "876000h"
      }
    }
  }
}
EOF

# ca-csr.json
cat <<EOF > ./ca-csr.json
{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "Kubernetes",
      "OU": "Kubernetes-manual"
    }
  ],
  "ca": {
    "expiry": "876000h"
  }
}
EOF

# etcd-ca-csr.json
cat <<EOF > ./etcd-ca-csr.json
{
  "CN": "etcd",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "etcd",
      "OU": "Etcd Security"
    }
  ],
  "ca": {
    "expiry": "876000h"
  }
}
EOF

# etcd-csr.json
cat <<EOF > ./etcd-csr.json
{
  "CN": "etcd",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "etcd",
      "OU": "Etcd Security"
    }
  ]
}
EOF

# front-proxy-ca-csr.json
cat <<EOF > ./front-proxy-ca-csr.json
{
  "CN": "kubernetes",
  "key": {
     "algo": "rsa",
     "size": 2048
  }
}
EOF

# front-proxy-client-csr.json
cat << EOF > ./front-proxy-client-csr.json
{
  "CN": "front-proxy-client",
  "key": {
     "algo": "rsa",
     "size": 2048
  }
}
EOF

# kubelet-csr.json
echo '{
  "CN": "system:node:$NODE",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "L": "Beijing",
      "ST": "Beijing",
      "O": "system:nodes",
      "OU": "Kubernetes-manual"
    }
  ]
} ' > ./kubelet-csr.json

# kube-proxy-csr.json
cat << EOF > ./kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:kube-proxy",
      "OU": "Kubernetes-manual"
    }
  ]
}
EOF

# manager-csr.json
cat << EOF > ./manager-csr.json
{
  "CN": "system:kube-controller-manager",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:kube-controller-manager",
      "OU": "Kubernetes-manual"
    }
  ]
}
EOF

# scheduler-csr.json
cat << EOF > ./scheduler-csr.json
{
  "CN": "system:kube-scheduler",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:kube-scheduler",
      "OU": "Kubernetes-manual"
    }
  ]
}
EOF

# 所有Master節點創建etcd證書目錄
mkdir /etc/etcd/ssl -p
# 所有節點創建kubernetes相關目錄
mkdir -p /etc/kubernetes/pki

cd /root/k8s/pki
cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare /etc/etcd/ssl/etcd-ca

cfssl gencert \
   -ca=/etc/etcd/ssl/etcd-ca.pem \
   -ca-key=/etc/etcd/ssl/etcd-ca-key.pem \
   -config=ca-config.json \
   -hostname=127.0.0.1,k8s-master01,k8s-master02,k8s-master03,192.168.1.11,192.168.1.12,192.168.1.13 \
   -profile=kubernetes \
   etcd-csr.json | cfssljson -bare /etc/etcd/ssl/etcd

MasterNodes='k8s-master02 k8s-master03'
WorkNodes='k8s-node01 k8s-node02'

for NODE in $MasterNodes; do
     ssh $NODE "mkdir -p /etc/etcd/ssl"
     for FILE in etcd-ca-key.pem  etcd-ca.pem  etcd-key.pem  etcd.pem; do
       scp /etc/etcd/ssl/${FILE} $NODE:/etc/etcd/ssl/${FILE}
     done
 done

cd /root/k8s/pki
cfssl gencert -initca ca-csr.json | cfssljson -bare /etc/kubernetes/pki/ca

cfssl gencert   -ca=/etc/kubernetes/pki/ca.pem   -ca-key=/etc/kubernetes/pki/ca-key.pem   -config=ca-config.json   -hostname=172.168.0.1,192.168.1.100,127.0.0.1,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,192.168.1.11,192.168.1.12,192.168.1.13   -profile=kubernetes   apiserver-csr.json | cfssljson -bare /etc/kubernetes/pki/apiserver

cfssl gencert   -initca front-proxy-ca-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-ca 

cfssl gencert   -ca=/etc/kubernetes/pki/front-proxy-ca.pem   -ca-key=/etc/kubernetes/pki/front-proxy-ca-key.pem   -config=ca-config.json   -profile=kubernetes   front-proxy-client-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-client

cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   manager-csr.json | cfssljson -bare /etc/kubernetes/pki/controller-manager

kubectl config set-cluster kubernetes \
     --certificate-authority=/etc/kubernetes/pki/ca.pem \
     --embed-certs=true \
     --server=https://192.168.1.100:8443 \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

kubectl config set-context system:kube-controller-manager@kubernetes \
    --cluster=kubernetes \
    --user=system:kube-controller-manager \
    --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

kubectl config set-credentials system:kube-controller-manager \
     --client-certificate=/etc/kubernetes/pki/controller-manager.pem \
     --client-key=/etc/kubernetes/pki/controller-manager-key.pem \
     --embed-certs=true \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

kubectl config use-context system:kube-controller-manager@kubernetes \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   scheduler-csr.json | cfssljson -bare /etc/kubernetes/pki/scheduler

kubectl config set-cluster kubernetes \
     --certificate-authority=/etc/kubernetes/pki/ca.pem \
     --embed-certs=true \
     --server=https://192.168.1.100:8443 \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig


kubectl config set-credentials system:kube-scheduler \
     --client-certificate=/etc/kubernetes/pki/scheduler.pem \
     --client-key=/etc/kubernetes/pki/scheduler-key.pem \
     --embed-certs=true \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

kubectl config set-context system:kube-scheduler@kubernetes \
     --cluster=kubernetes \
     --user=system:kube-scheduler \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig


kubectl config use-context system:kube-scheduler@kubernetes \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig


cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   admin-csr.json | cfssljson -bare /etc/kubernetes/pki/admin

kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.1.100:8443     --kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config set-credentials kubernetes-admin     --client-certificate=/etc/kubernetes/pki/admin.pem     --client-key=/etc/kubernetes/pki/admin-key.pem     --embed-certs=true     --kubeconfig=/etc/kubernetes/admin.kubeconfig

kubectl config set-context kubernetes-admin@kubernetes     --cluster=kubernetes     --user=kubernetes-admin     --kubeconfig=/etc/kubernetes/admin.kubeconfig

kubectl config use-context kubernetes-admin@kubernetes     --kubeconfig=/etc/kubernetes/admin.kubeconfig

openssl genrsa -out /etc/kubernetes/pki/sa.key 2048
openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub

for NODE in k8s-master02 k8s-master03; do 
	for FILE in $(ls /etc/kubernetes/pki | grep -v etcd); do 
		scp /etc/kubernetes/pki/${FILE} $NODE:/etc/kubernetes/pki/${FILE};
	done;
 
	for FILE in admin.kubeconfig controller-manager.kubeconfig scheduler.kubeconfig; do 
		scp /etc/kubernetes/${FILE} $NODE:/etc/kubernetes/${FILE};
	done;
done;

ls /etc/kubernetes/pki/
# admin.csr      apiserver.csr      ca.csr      controller-manager.csr      front-proxy-ca.csr      front-proxy-client.csr      sa.key         scheduler-key.pem
# admin-key.pem  apiserver-key.pem  ca-key.pem  controller-manager-key.pem  front-proxy-# ca-key.pem  front-proxy-client-key.pem  sa.pub         scheduler.pem
# admin.pem      apiserver.pem      ca.pem      controller-manager.pem      front-proxy-ca.pem      front-proxy-client.pem      scheduler.csr

ls /etc/kubernetes/pki/ |wc -l
# 23

cat  << EOF > /etc/etcd/etcd.config.yml
name: 'k8s-master01'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.11:2380'
listen-client-urls: 'https://192.168.1.11:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.11:2380'
advertise-client-urls: 'https://192.168.1.11:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.11:2380,k8s-master02=https://192.168.1.12:2380,k8s-master03=https://192.168.1.13:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOF

cat  << EOF >  /etc/etcd/etcd.config.yml
name: 'k8s-master02'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.12:2380'
listen-client-urls: 'https://192.168.1.12:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.12:2380'
advertise-client-urls: 'https://192.168.1.12:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.11:2380,k8s-master02=https://192.168.1.12:2380,k8s-master03=https://192.168.1.13:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOF

cat << EOF >  /etc/etcd/etcd.config.yml
name: 'k8s-master03'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.13:2380'
listen-client-urls: 'https://192.168.1.13:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.13:2380'
advertise-client-urls: 'https://192.168.1.13:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.11:2380,k8s-master02=https://192.168.1.12:2380,k8s-master03=https://192.168.1.13:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOF

cat  << EOF > /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Service
Documentation=https://coreos.com/etcd/docs/latest/
After=network.target

[Service]
Type=notify
ExecStart=/usr/local/bin/etcd --config-file=/etc/etcd/etcd.config.yml
Restart=on-failure
RestartSec=10
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
Alias=etcd3.service
EOF

mkdir /etc/kubernetes/pki/etcd
ln -s /etc/etcd/ssl/* /etc/kubernetes/pki/etcd/
systemctl daemon-reload;systemctl enable --now etcd

export ETCDCTL_API=3
etcdctl --endpoints="192.168.1.13:2379,192.168.1.12:2379,192.168.1.11:2379" --cacert=/etc/kubernetes/pki/etcd/etcd-ca.pem --cert=/etc/kubernetes/pki/etcd/etcd.pem --key=/etc/kubernetes/pki/etcd/etcd-key.pem  endpoint status --write-out=table

yum install keepalived haproxy -y

cat << EOF >  /etc/haproxy/haproxy.cfg 
global
  maxconn  2000
  ulimit-n  16384
  log  127.0.0.1 local0 err
  stats timeout 30s

defaults
  log global
  mode  http
  option  httplog
  timeout connect 5000
  timeout client  50000
  timeout server  50000
  timeout http-request 15s
  timeout http-keep-alive 15s

frontend k8s-master
  bind 0.0.0.0:8443
  bind 127.0.0.1:8443
  mode tcp
  option tcplog
  tcp-request inspect-delay 5s
  default_backend k8s-master

backend k8s-master
  mode tcp
  option tcplog
  option tcp-check
  balance roundrobin
  default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
  server k8s-master01    192.168.1.11:6443  check
  server k8s-master02    192.168.1.12:6443  check
  server k8s-master03    192.168.1.13:6443  check
EOF

cat << EOF >  /etc/keepalived/keepalived.conf 
! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5 
    weight -5
    fall 2
    rise 1
}
vrrp_instance VI_1 {
    state MASTER
    interface eth0
    mcast_src_ip 192.168.1.11
    virtual_router_id 51
    priority 101
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.1.100
    }
    track_script {
      chk_apiserver 
} }
EOF

cat << EOF >  /etc/keepalived/keepalived.conf 
! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5 
    weight -5
    fall 2
    rise 1
 
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    mcast_src_ip 192.168.1.12
    virtual_router_id 51
    priority 100
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.1.100
    }
    track_script {
      chk_apiserver 
} }
EOF

cat << EOF >  /etc/keepalived/keepalived.conf 
! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5
    weight -5
    fall 2  
    rise 1
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    mcast_src_ip 192.168.1.13
    virtual_router_id 51
    priority 102
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.1.100
    }
    track_script {
      chk_apiserver 
} }
EOF

cat  << EOF > /etc/keepalived/check_apiserver.sh 
#!/bin/bash
err=0
for k in $(seq 1 3)
do
    check_code=$(pgrep haproxy)
    if [[ $check_code == "" ]]; then
        err=$(expr $err + 1)
        sleep 1
        continue
    else
        err=0
        break
    fi
done

if [[ $err != "0" ]]; then
    echo "systemctl stop keepalived"
    /usr/bin/systemctl stop keepalived
    exit 1
else
    exit 0
fi
EOF
chmod +x /etc/keepalived/check_apiserver.sh

systemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived

[root@k8s-master01 pki]# ping 192.168.1.100
PING 192.168.1.100 (192.168.1.100) 56(84) bytes of data.
64 bytes from 192.168.1.100: icmp_seq=1 ttl=64 time=1.39 ms

telnet 192.168.1.100 8443

mkdir -p /etc/kubernetes/manifests/ /etc/systemd/system/kubelet.service.d /var/lib/kubelet /var/log/kubernetes

cat  << EOF > /usr/lib/systemd/system/kube-apiserver.service 
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.1.11 \
      --service-cluster-ip-range=172.168.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.1.11:2379,https://192.168.1.12:2379,https://192.168.1.13:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF

cat  << EOF > /usr/lib/systemd/system/kube-apiserver.service 
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.1.12 \
      --service-cluster-ip-range=172.168.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.1.11:2379,https://192.168.1.12:2379,https://192.168.1.13:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF

cat << EOF > /usr/lib/systemd/system/kube-apiserver.service 
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.1.13 \
      --service-cluster-ip-range=172.168.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.1.11:2379,https://192.168.1.12:2379,https://192.168.1.13:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF

# 所有Master節點開啟kube-apiserver
systemctl daemon-reload && systemctl enable --now kube-apiserver

# 檢測kube-server狀態
systemctl status kube-apiserver

cat  << EOF >> /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-controller-manager \
      --v=2 \
      --logtostderr=true \
      --address=127.0.0.1 \
      --root-ca-file=/etc/kubernetes/pki/ca.pem \
      --cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem \
      --cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem \
      --service-account-private-key-file=/etc/kubernetes/pki/sa.key \
      --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig \
      --leader-elect=true \
      --use-service-account-credentials=true \
      --node-monitor-grace-period=40s \
      --node-monitor-period=5s \
      --pod-eviction-timeout=2m0s \
      --controllers=*,bootstrapsigner,tokencleaner \
      --allocate-node-cidrs=true \
      --cluster-cidr=172.16.0.0/12 \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem \
      --node-cidr-mask-size=24
      
Restart=always
RestartSec=10s

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl enable --now kube-controller-manager
systemctl  status kube-controller-manager

cat  << EOF > /usr/lib/systemd/system/kube-scheduler.service 
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-scheduler \
      --v=2 \
      --logtostderr=true \
      --address=127.0.0.1 \
      --leader-elect=true \
      --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

Restart=always
RestartSec=10s

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl enable --now kube-scheduler

mkdir /root/k8s/bootstrap;cd /root/k8s/bootstrap
echo 'apiVersion: v1
kind: Secret
metadata:
  name: bootstrap-token-c8ad9c
  namespace: kube-system
type: bootstrap.kubernetes.io/token
stringData:
  description: "The default bootstrap token generated by 'kubelet '."
  token-id: c8ad9c
  token-secret: 2e4d610cf3e7426e
  usage-bootstrap-authentication: "true"
  usage-bootstrap-signing: "true"
  auth-extra-groups:  system:bootstrappers:default-node-token,system:bootstrappers:worker,system:bootstrappers:ingress
 
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: kubelet-bootstrap
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:node-bootstrapper
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: Group
  name: system:bootstrappers:default-node-token
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: node-autoapprove-bootstrap
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:certificates.k8s.io:certificatesigningrequests:nodeclient
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: Group
  name: system:bootstrappers:default-node-token
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: node-autoapprove-certificate-rotation
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:certificates.k8s.io:certificatesigningrequests:selfnodeclient
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: Group
  name: system:nodes
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:kube-apiserver-to-kubelet
rules:
  - apiGroups:
      - ""
    resources:
      - nodes/proxy
      - nodes/stats
      - nodes/log
      - nodes/spec
      - nodes/metrics
    verbs:
      - "*"
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: system:kube-apiserver
  namespace: ""
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:kube-apiserver-to-kubelet
subjects:
  - apiGroup: rbac.authorization.k8s.io
    kind: User
    name: kube-apiserver ' > ./bootstrap.secret.yaml

cd /root/k8s/bootstrap
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.1.100:8443     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-credentials tls-bootstrap-token-user     --token=c8ad9c.2e4d610cf3e7426e --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-context tls-bootstrap-token-user@kubernetes     --cluster=kubernetes     --user=tls-bootstrap-token-user     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config use-context tls-bootstrap-token-user@kubernetes     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig

mkdir -p /root/.kube ; cp /etc/kubernetes/admin.kubeconfig /root/.kube/config
kubectl create -f bootstrap.secret.yaml 

cd /etc/kubernetes/
for NODE in k8s-master02 k8s-master03 k8s-node01 k8s-node02; do
     ssh $NODE mkdir -p /etc/kubernetes/pki /etc/etcd/ssl /etc/etcd/ssl
     for FILE in etcd-ca.pem etcd.pem etcd-key.pem; do
       scp /etc/etcd/ssl/$FILE $NODE:/etc/etcd/ssl/
     done
     for FILE in pki/ca.pem pki/ca-key.pem pki/front-proxy-ca.pem bootstrap-kubelet.kubeconfig; do
       scp /etc/kubernetes/$FILE $NODE:/etc/kubernetes/${FILE}
	 done
 done

mkdir -p /var/lib/kubelet /var/log/kubernetes /etc/systemd/system/kubelet.service.d /etc/kubernetes/manifests/

cat << EOF > /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
ExecStart=/usr/local/bin/kubelet

Restart=always
StartLimitInterval=0
RestartSec=10

[Install]
WantedBy=multi-user.target
EOF

cat /etc/systemd/system/kubelet.service.d/10-kubelet.conf
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig"
Environment="KUBELET_SYSTEM_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_CONFIG_ARGS=--config=/etc/kubernetes/kubelet-conf.yml --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.4.1"
Environment="KUBELET_EXTRA_ARGS=--node-labels=node.kubernetes.io/node='' "
ExecStart=
ExecStart=/usr/local/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_SYSTEM_ARGS $KUBELET_EXTRA_ARGS

echo 'apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 2m0s
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.pem
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 5m0s
    cacheUnauthorizedTTL: 30s
cgroupDriver: systemd
cgroupsPerQOS: true
clusterDNS:
- 172.168.0.10
clusterDomain: cluster.local
containerLogMaxFiles: 5
containerLogMaxSize: 10Mi
contentType: application/vnd.kubernetes.protobuf
cpuCFSQuota: true
cpuManagerPolicy: none
cpuManagerReconcilePeriod: 10s
enableControllerAttachDetach: true
enableDebuggingHandlers: true
enforceNodeAllocatable:
- pods
eventBurst: 10
eventRecordQPS: 5
evictionHard:
  imagefs.available: 15%
  memory.available: 100Mi
  nodefs.available: 10%
  nodefs.inodesFree: 5%
evictionPressureTransitionPeriod: 5m0s
failSwapOn: true
fileCheckFrequency: 20s
hairpinMode: promiscuous-bridge
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 20s
imageGCHighThresholdPercent: 85
imageGCLowThresholdPercent: 80
imageMinimumGCAge: 2m0s
iptablesDropBit: 15
iptablesMasqueradeBit: 14
kubeAPIBurst: 10
kubeAPIQPS: 5
makeIPTablesUtilChains: true
maxOpenFiles: 1000000
maxPods: 110
nodeStatusUpdateFrequency: 10s
oomScoreAdj: -999
podPidsLimit: -1
registryBurst: 10
registryPullQPS: 5
resolvConf: /etc/resolv.conf
rotateCertificates: true
runtimeRequestTimeout: 2m0s
serializeImagePulls: true
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 4h0m0s
syncFrequency: 1m0s
volumeStatsAggPeriod: 1m0s ' > /etc/kubernetes/kubelet-conf.yml

systemctl daemon-reload
systemctl enable --now kubelet

[root@k8s-master01 kubernetes]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master01 NotReady 5m v1.20.0
k8s-master02 NotReady 4m53s v1.20.0
k8s-master03 NotReady 4m48s v1.20.0
k8s-node01 NotReady 118s v1.20.0
k8s-node02 NotReady 118s v1.20.0

kubectl -n kube-system create serviceaccount kube-proxy
kubectl create clusterrolebinding system:kube-proxy         --clusterrole system:node-proxier         --serviceaccount kube-system:kube-proxy
SECRET=$(kubectl -n kube-system get sa/kube-proxy \
    --output=jsonpath='{.secrets[0].name}')
JWT_TOKEN=$(kubectl -n kube-system get secret/$SECRET \
--output=jsonpath='{.data.token}' | base64 -d)
PKI_DIR=/etc/kubernetes/pki
K8S_DIR=/etc/kubernetes
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.1.100:8443     --kubeconfig=${K8S_DIR}/kube-proxy.kubeconfig
kubectl config set-credentials kubernetes     --token=${JWT_TOKEN}     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-context kubernetes     --cluster=kubernetes     --user=kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config use-context kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig

mkdir /root/k8s/kube-proxy;cd /root/k8s/kube-proxy
echo 'apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 0.0.0.0
clientConnection:
  acceptContentTypes: ""
  burst: 10
  contentType: application/vnd.kubernetes.protobuf
  kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
  qps: 5
clusterCIDR: 10.244.0.0/16
configSyncPeriod: 15m0s
conntrack:
  max: null
  maxPerCore: 32768
  min: 131072
  tcpCloseWaitTimeout: 1h0m0s
  tcpEstablishedTimeout: 24h0m0s
enableProfiling: false
healthzBindAddress: 0.0.0.0:10256
hostnameOverride: ""
iptables:
  masqueradeAll: false
  masqueradeBit: 14
  minSyncPeriod: 0s
  syncPeriod: 30s
ipvs:
  masqueradeAll: true
  minSyncPeriod: 5s
  scheduler: "rr"
  syncPeriod: 30s
kind: KubeProxyConfiguration
metricsBindAddress: 127.0.0.1:10249
mode: "ipvs"
nodePortAddresses: null
oomScoreAdj: -999
portRange: ""
udpIdleTimeout: 250ms ' > ./kube-proxy.conf
echo '[Unit]
Description=Kubernetes Kube Proxy
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-proxy \
  --config=/etc/kubernetes/kube-proxy.conf \
  --v=2

Restart=always
RestartSec=10s

[Install]
WantedBy=multi-user.target ' > ./kube-proxy.service

for NODE in k8s-master01 k8s-master02 k8s-master03; do
     scp ${K8S_DIR}/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done


for NODE in k8s-node01 k8s-node02; do
     scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done

systemctl daemon-reload
systemctl enable --now kube-proxy

mkdir /root/k8s/calico;cd /root/k8s/calico/
cat << EOF > ./calico.yaml
---
# Source: calico/templates/calico-etcd-secrets.yaml
# The following contains k8s Secrets for use with a TLS enabled etcd cluster.
# For information on populating Secrets, see http://kubernetes.io/docs/user-guide/secrets/
apiVersion: v1
kind: Secret
type: Opaque
metadata:
  name: calico-etcd-secrets
  namespace: kube-system
data:
  # Populate the following with etcd TLS configuration if desired, but leave blank if
  # not using TLS for etcd.
  # The keys below should be uncommented and the values populated with the base64
  # encoded contents of each file that would be associated with the TLS data.
  # Example command for encoding a file contents: cat <file> | base64 -w 0
  etcd-key: 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
  etcd-cert: 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
  etcd-ca: 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
---
# Source: calico/templates/calico-config.yaml
# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
  name: calico-config
  namespace: kube-system
data:
  # Configure this with the location of your etcd cluster.
  etcd_endpoints: "https://192.168.1.11:2379,https://192.168.1.12:2379,https://192.168.1.13:2379"
  # If you're using TLS enabled etcd uncomment the following.
  # You must also populate the Secret below with these files.
  etcd_ca: "/calico-secrets/etcd-ca"   # "/calico-secrets/etcd-ca"
  etcd_cert: "/calico-secrets/etcd-cert" # "/calico-secrets/etcd-cert"
  etcd_key: "/calico-secrets/etcd-key"  # "/calico-secrets/etcd-key"
  # Typha is disabled.
  typha_service_name: "none"
  # Configure the backend to use.
  calico_backend: "bird"
  # Configure the MTU to use for workload interfaces and tunnels.
  # - If Wireguard is enabled, set to your network MTU - 60
  # - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50
  # - Otherwise, if IPIP is enabled, set to your network MTU - 20
  # - Otherwise, if not using any encapsulation, set to your network MTU.
  veth_mtu: "1440"

  # The CNI network configuration to install on each node. The special
  # values in this config will be automatically populated.
  cni_network_config: |-
    {
      "name": "k8s-pod-network",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "calico",
          "log_level": "info",
          "etcd_endpoints": "__ETCD_ENDPOINTS__",
          "etcd_key_file": "__ETCD_KEY_FILE__",
          "etcd_cert_file": "__ETCD_CERT_FILE__",
          "etcd_ca_cert_file": "__ETCD_CA_CERT_FILE__",
          "mtu": __CNI_MTU__,
          "ipam": {
              "type": "calico-ipam"
          },
          "policy": {
              "type": "k8s"
          },
          "kubernetes": {
              "kubeconfig": "__KUBECONFIG_FILEPATH__"
          }
        },
        {
          "type": "portmap",
          "snat": true,
          "capabilities": {"portMappings": true}
        },
        {
          "type": "bandwidth",
          "capabilities": {"bandwidth": true}
        }
      ]
    }

---
# Source: calico/templates/calico-kube-controllers-rbac.yaml

# Include a clusterrole for the kube-controllers component,
# and bind it to the calico-kube-controllers serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-kube-controllers
rules:
  # Pods are monitored for changing labels.
  # The node controller monitors Kubernetes nodes.
  # Namespace and serviceaccount labels are used for policy.
  - apiGroups: [""]
    resources:
      - pods
      - nodes
      - namespaces
      - serviceaccounts
    verbs:
      - watch
      - list
      - get
  # Watch for changes to Kubernetes NetworkPolicies.
  - apiGroups: ["networking.k8s.io"]
    resources:
      - networkpolicies
    verbs:
      - watch
      - list
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-kube-controllers
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: calico-kube-controllers
subjects:
- kind: ServiceAccount
  name: calico-kube-controllers
  namespace: kube-system
---

---
# Source: calico/templates/calico-node-rbac.yaml
# Include a clusterrole for the calico-node DaemonSet,
# and bind it to the calico-node serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-node
rules:
  # The CNI plugin needs to get pods, nodes, and namespaces.
  - apiGroups: [""]
    resources:
      - pods
      - nodes
      - namespaces
    verbs:
      - get
  - apiGroups: [""]
    resources:
      - endpoints
      - services
    verbs:
      # Used to discover service IPs for advertisement.
      - watch
      - list
  # Pod CIDR auto-detection on kubeadm needs access to config maps.
  - apiGroups: [""]
    resources:
      - configmaps
    verbs:
      - get
  - apiGroups: [""]
    resources:
      - nodes/status
    verbs:
      # Needed for clearing NodeNetworkUnavailable flag.
      - patch

---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: calico-node
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: calico-node
subjects:
- kind: ServiceAccount
  name: calico-node
  namespace: kube-system

---
# Source: calico/templates/calico-node.yaml
# This manifest installs the calico-node container, as well
# as the CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: apps/v1
metadata:
  name: calico-node
  namespace: kube-system
  labels:
    k8s-app: calico-node
spec:
  selector:
    matchLabels:
      k8s-app: calico-node
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  template:
    metadata:
      labels:
        k8s-app: calico-node
    spec:
      nodeSelector:
        kubernetes.io/os: linux
      hostNetwork: true
      tolerations:
        # Make sure calico-node gets scheduled on all nodes.
        - effect: NoSchedule
          operator: Exists
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
        - effect: NoExecute
          operator: Exists
      serviceAccountName: calico-node
      # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force
      # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods.
      terminationGracePeriodSeconds: 0
      priorityClassName: system-node-critical
      initContainers:
        # This container installs the CNI binaries
        # and CNI network config file on each node.
        - name: install-cni
          image: registry.cn-beijing.aliyuncs.com/dotbalo/cni:v3.15.3
          command: ["/install-cni.sh"]
          env:
            # Name of the CNI config file to create.
            - name: CNI_CONF_NAME
              value: "10-calico.conflist"
            # The CNI network config to install on each node.
            - name: CNI_NETWORK_CONFIG
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: cni_network_config
            # The location of the etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # CNI MTU Config variable
            - name: CNI_MTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # Prevents the container from sleeping forever.
            - name: SLEEP
              value: "false"
          volumeMounts:
            - mountPath: /host/opt/cni/bin
              name: cni-bin-dir
            - mountPath: /host/etc/cni/net.d
              name: cni-net-dir
            - mountPath: /calico-secrets
              name: etcd-certs
          securityContext:
            privileged: true
        # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes
        # to communicate with Felix over the Policy Sync API.
        - name: flexvol-driver
          image: registry.cn-beijing.aliyuncs.com/dotbalo/pod2daemon-flexvol:v3.15.3
          volumeMounts:
          - name: flexvol-driver-host
            mountPath: /host/driver
          securityContext:
            privileged: true
      containers:
        # Runs calico-node container on each Kubernetes node. This
        # container programs network policy and routes on each
        # host.
        - name: calico-node
          image: registry.cn-beijing.aliyuncs.com/dotbalo/node:v3.15.3
          env:
            # The location of the etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # Location of the CA certificate for etcd.
            - name: ETCD_CA_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_ca
            # Location of the client key for etcd.
            - name: ETCD_KEY_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_key
            # Location of the client certificate for etcd.
            - name: ETCD_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_cert
            # Set noderef for node controller.
            - name: CALICO_K8S_NODE_REF
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            # Choose the backend to use.
            - name: CALICO_NETWORKING_BACKEND
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: calico_backend
            # Cluster type to identify the deployment type
            - name: CLUSTER_TYPE
              value: "k8s,bgp"
            # Auto-detect the BGP IP address.
            - name: IP
              value: "autodetect"
            # Enable IPIP
            - name: CALICO_IPV4POOL_IPIP
              value: "Always"
            # Enable or Disable VXLAN on the default IP pool.
            - name: CALICO_IPV4POOL_VXLAN
              value: "Never"
            # Set MTU for tunnel device used if ipip is enabled
            - name: FELIX_IPINIPMTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # Set MTU for the VXLAN tunnel device.
            - name: FELIX_VXLANMTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # Set MTU for the Wireguard tunnel device.
            - name: FELIX_WIREGUARDMTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # The default IPv4 pool to create on startup if none exists. Pod IPs will be
            # chosen from this range. Changing this value after installation will have
            # no effect. This should fall within `--cluster-cidr`.
            - name: CALICO_IPV4POOL_CIDR
              value: "172.168.0.0/16"
            # Disable file logging so `kubectl logs` works.
            - name: CALICO_DISABLE_FILE_LOGGING
              value: "true"
            # Set Felix endpoint to host default action to ACCEPT.
            - name: FELIX_DEFAULTENDPOINTTOHOSTACTION
              value: "ACCEPT"
            # Disable IPv6 on Kubernetes.
            - name: FELIX_IPV6SUPPORT
              value: "false"
            # Set Felix logging to "info"
            - name: FELIX_LOGSEVERITYSCREEN
              value: "info"
            - name: FELIX_HEALTHENABLED
              value: "true"
          securityContext:
            privileged: true
          resources:
            requests:
              cpu: 250m
          livenessProbe:
            exec:
              command:
              - /bin/calico-node
              - -felix-live
              - -bird-live
            periodSeconds: 10
            initialDelaySeconds: 10
            failureThreshold: 6
          readinessProbe:
            exec:
              command:
              - /bin/calico-node
              - -felix-ready
              - -bird-ready
            periodSeconds: 10
          volumeMounts:
            - mountPath: /lib/modules
              name: lib-modules
              readOnly: true
            - mountPath: /run/xtables.lock
              name: xtables-lock
              readOnly: false
            - mountPath: /var/run/calico
              name: var-run-calico
              readOnly: false
            - mountPath: /var/lib/calico
              name: var-lib-calico
              readOnly: false
            - mountPath: /calico-secrets
              name: etcd-certs
            - name: policysync
              mountPath: /var/run/nodeagent
      volumes:
        # Used by calico-node.
        - name: lib-modules
          hostPath:
            path: /lib/modules
        - name: var-run-calico
          hostPath:
            path: /var/run/calico
        - name: var-lib-calico
          hostPath:
            path: /var/lib/calico
        - name: xtables-lock
          hostPath:
            path: /run/xtables.lock
            type: FileOrCreate
        # Used to install CNI.
        - name: cni-bin-dir
          hostPath:
            path: /opt/cni/bin
        - name: cni-net-dir
          hostPath:
            path: /etc/cni/net.d
        # Mount in the etcd TLS secrets with mode 400.
        # See https://kubernetes.io/docs/concepts/configuration/secret/
        - name: etcd-certs
          secret:
            secretName: calico-etcd-secrets
            defaultMode: 0400
        # Used to create per-pod Unix Domain Sockets
        - name: policysync
          hostPath:
            type: DirectoryOrCreate
            path: /var/run/nodeagent
        # Used to install Flex Volume Driver
        - name: flexvol-driver-host
          hostPath:
            type: DirectoryOrCreate
            path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds
---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: calico-node
  namespace: kube-system

---
# Source: calico/templates/calico-kube-controllers.yaml
# See https://github.com/projectcalico/kube-controllers
apiVersion: apps/v1
kind: Deployment
metadata:
  name: calico-kube-controllers
  namespace: kube-system
  labels:
    k8s-app: calico-kube-controllers
spec:
  # The controllers can only have a single active instance.
  replicas: 1
  selector:
    matchLabels:
      k8s-app: calico-kube-controllers
  strategy:
    type: Recreate
  template:
    metadata:
      name: calico-kube-controllers
      namespace: kube-system
      labels:
        k8s-app: calico-kube-controllers
    spec:
      nodeSelector:
        kubernetes.io/os: linux
      tolerations:
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
      serviceAccountName: calico-kube-controllers
      priorityClassName: system-cluster-critical
      # The controllers must run in the host network namespace so that
      # it isn't governed by policy that would prevent it from working.
      hostNetwork: true
      containers:
        - name: calico-kube-controllers
          image: registry.cn-beijing.aliyuncs.com/dotbalo/kube-controllers:v3.15.3
          env:
            # The location of the etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # Location of the CA certificate for etcd.
            - name: ETCD_CA_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_ca
            # Location of the client key for etcd.
            - name: ETCD_KEY_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_key
            # Location of the client certificate for etcd.
            - name: ETCD_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_cert
            # Choose which controllers to run.
            - name: ENABLED_CONTROLLERS
              value: policy,namespace,serviceaccount,workloadendpoint,node
          volumeMounts:
            # Mount in the etcd TLS secrets.
            - mountPath: /calico-secrets
              name: etcd-certs
          readinessProbe:
            exec:
              command:
              - /usr/bin/check-status
              - -r
      volumes:
        # Mount in the etcd TLS secrets with mode 400.
        # See https://kubernetes.io/docs/concepts/configuration/secret/
        - name: etcd-certs
          secret:
            secretName: calico-etcd-secrets
            defaultMode: 0400

---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: calico-kube-controllers
  namespace: kube-system

---
# Source: calico/templates/calico-typha.yaml

---
# Source: calico/templates/configure-canal.yaml

---
# Source: calico/templates/kdd-crds.yaml
EOF

# 以下步驟只在master01執行
cd /root/k8s/calico/
# 修改calico-etcd.yaml的以下位置
sed -i 's#etcd_endpoints: "http://<ETCD_IP>:<ETCD_PORT>"#etcd_endpoints: "https://192.168.1.11:2379,https://192.168.1.12:2379,https://192.168.1.13:2379"#g' calico-etcd.yaml

ETCD_CA=`cat /etc/kubernetes/pki/etcd/etcd-ca.pem | base64 | tr -d '\n'`
ETCD_CERT=`cat /etc/kubernetes/pki/etcd/etcd.pem | base64 | tr -d '\n'`
ETCD_KEY=`cat /etc/kubernetes/pki/etcd/etcd-key.pem | base64 | tr -d '\n'`

sed -i "s@# etcd-key: null@etcd-key: ${ETCD_KEY}@g; s@# etcd-cert: null@etcd-cert: ${ETCD_CERT}@g; s@# etcd-ca: null@etcd-ca: ${ETCD_CA}@g" calico-etcd.yaml
sed -i 's#etcd_ca: ""#etcd_ca: "/calico-secrets/etcd-ca"#g; s#etcd_cert: ""#etcd_cert: "/calico-secrets/etcd-cert"#g; s#etcd_key: "" #etcd_key: "/calico-secrets/etcd-key" #g' calico-etcd.yaml

POD_SUBNET="172.16.0.0/12"
sed -i 's@# - name: CALICO_IPV4POOL_CIDR@- name: CALICO_IPV4POOL_CIDR@g; s@#   value: "192.168.0.0/16"@  value: '"${POD_SUBNET}"'@g' calico-etcd.yaml

grep "CALICO_IPV4POOL_CIDR" calico-etcd.yaml -A 1
kubectl apply -f calico.yaml

# 如果容器狀態異常可以使用kubectl describe 或者logs查看容器的日志
kubectl  get po -n kube-system

[root@k8s-master01 ~]# kubectl get no
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready 2d2h v1.20.0
k8s-master02 Ready 2d2h v1.20.0
k8s-master03 Ready 2d2h v1.20.0
k8s-node01 Ready 2d2h v1.20.0
k8s-node02 Ready 2d2h v1.20.0

mkdir /root/k8s/coredns ;cd /root/k8s/coredns
cat << EOF > ./coredns.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: coredns
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:coredns
rules:
- apiGroups:
  - ""
  resources:
  - endpoints
  - services
  - pods
  - namespaces
  verbs:
  - list
  - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:coredns
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:coredns
subjects:
- kind: ServiceAccount
  name: coredns
  namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
data:
  Corefile: |
    .:53 {
        errors
        health {
          lameduck 5s
        }
        ready
        kubernetes cluster.local in-addr.arpa ip6.arpa {
          fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        forward . /etc/resolv.conf {
          max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: kube-dns
    kubernetes.io/name: "CoreDNS"
spec:
  # replicas: not specified here:
  # 1. Default is 1.
  # 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  selector:
    matchLabels:
      k8s-app: kube-dns
  template:
    metadata:
      labels:
        k8s-app: kube-dns
    spec:
      priorityClassName: system-cluster-critical
      serviceAccountName: coredns
      tolerations:
        - key: "CriticalAddonsOnly"
          operator: "Exists"
      nodeSelector:
        kubernetes.io/os: linux
      affinity:
         podAntiAffinity:
           preferredDuringSchedulingIgnoredDuringExecution:
           - weight: 100
             podAffinityTerm:
               labelSelector:
                 matchExpressions:
                   - key: k8s-app
                     operator: In
                     values: ["kube-dns"]
               topologyKey: kubernetes.io/hostname
      containers:
      - name: coredns
        image: registry.cn-beijing.aliyuncs.com/dotbalo/coredns:1.7.0
        imagePullPolicy: IfNotPresent
        resources:
          limits:
            memory: 170Mi
          requests:
            cpu: 100m
            memory: 70Mi
        args: [ "-conf", "/etc/coredns/Corefile" ]
        volumeMounts:
        - name: config-volume
          mountPath: /etc/coredns
          readOnly: true
        ports:
        - containerPort: 53
          name: dns
          protocol: UDP
        - containerPort: 53
          name: dns-tcp
          protocol: TCP
        - containerPort: 9153
          name: metrics
          protocol: TCP
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            add:
            - NET_BIND_SERVICE
            drop:
            - all
          readOnlyRootFilesystem: true
        livenessProbe:
          httpGet:
            path: /health
            port: 8080
            scheme: HTTP
          initialDelaySeconds: 60
          timeoutSeconds: 5
          successThreshold: 1
          failureThreshold: 5
        readinessProbe:
          httpGet:
            path: /ready
            port: 8181
            scheme: HTTP
      dnsPolicy: Default
      volumes:
        - name: config-volume
          configMap:
            name: coredns
            items:
            - key: Corefile
              path: Corefile
---
apiVersion: v1
kind: Service
metadata:
  name: kube-dns
  namespace: kube-system
  annotations:
    prometheus.io/port: "9153"
    prometheus.io/scrape: "true"
  labels:
    k8s-app: kube-dns
    kubernetes.io/cluster-service: "true"
    kubernetes.io/name: "CoreDNS"
spec:
  selector:
    k8s-app: kube-dns
  clusterIP: 172.168.0.10
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP
  - name: metrics
    port: 9153
    protocol: TCP
EOF

sed -i "s#10.96.0.10#172.168.0.10#g" CoreDNS/coredns.yaml

kubectl  create -f CoreDNS/coredns.yaml 

git clone https://github.com/coredns/deployment.git
cd deployment/kubernetes
#./deploy.sh -s -i 172.168.0.10 | kubectl apply -f -

kubectl get po -n kube-system -l k8s-app=kube-dns

mkdir /root/k8s/metrics-server;cd /root/k8s/metrics-server/
echo 'apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: metrics-server
  name: metrics-server
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    k8s-app: metrics-server
    rbac.authorization.k8s.io/aggregate-to-admin: "true"
    rbac.authorization.k8s.io/aggregate-to-edit: "true"
    rbac.authorization.k8s.io/aggregate-to-view: "true"
  name: system:aggregated-metrics-reader
rules:
  - apiGroups:
      - metrics.k8s.io
    resources:
      - pods
      - nodes
    verbs:
      - get
      - list
      - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    k8s-app: metrics-server
  name: system:metrics-server
rules:
  - apiGroups:
      - ""
    resources:
      - pods
      - nodes
      - nodes/stats
      - namespaces
      - configmaps
    verbs:
      - get
      - list
      - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    k8s-app: metrics-server
  name: metrics-server-auth-reader
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: extension-apiserver-authentication-reader
subjects:
  - kind: ServiceAccount
    name: metrics-server
    namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  labels:
    k8s-app: metrics-server
  name: metrics-server:system:auth-delegator
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:auth-delegator
subjects:
  - kind: ServiceAccount
    name: metrics-server
    namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  labels:
    k8s-app: metrics-server
  name: system:metrics-server
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:metrics-server
subjects:
  - kind: ServiceAccount
    name: metrics-server
    namespace: kube-system
---
apiVersion: v1
kind: Service
metadata:
  labels:
    k8s-app: metrics-server
  name: metrics-server
  namespace: kube-system
spec:
  ports:
    - name: https
      port: 443
      protocol: TCP
      targetPort: https
  selector:
    k8s-app: metrics-server
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    k8s-app: metrics-server
  name: metrics-server
  namespace: kube-system
spec:
  selector:
    matchLabels:
      k8s-app: metrics-server
  strategy:
    rollingUpdate:
      maxUnavailable: 0
  template:
    metadata:
      labels:
        k8s-app: metrics-server
    spec:
      containers:
        - args:
            - --cert-dir=/tmp
            - --secure-port=4443
            - --metric-resolution=30s
            - --kubelet-insecure-tls
            - --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
            - --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem # change to front-proxy-ca.crt for kubeadm
            - --requestheader-username-headers=X-Remote-User
            - --requestheader-group-headers=X-Remote-Group
            - --requestheader-extra-headers-prefix=X-Remote-Extra-
          image: registry.cn-beijing.aliyuncs.com/dotbalo/metrics-server:v0.4.1
          imagePullPolicy: IfNotPresent
          livenessProbe:
            failureThreshold: 3
            httpGet:
              path: /livez
              port: https
              scheme: HTTPS
            periodSeconds: 10
          name: metrics-server
          ports:
            - containerPort: 4443
              name: https
              protocol: TCP
          readinessProbe:
            failureThreshold: 3
            httpGet:
              path: /readyz
              port: https
              scheme: HTTPS
            periodSeconds: 10
          securityContext:
            readOnlyRootFilesystem: true
            runAsNonRoot: true
            runAsUser: 1000
          volumeMounts:
            - mountPath: /tmp
              name: tmp-dir
            - name: ca-ssl
              mountPath: /etc/kubernetes/pki
      nodeSelector:
        kubernetes.io/os: linux
      priorityClassName: system-cluster-critical
      serviceAccountName: metrics-server
      volumes:
        - emptyDir: {}
          name: tmp-dir
        - name: ca-ssl
          hostPath:
            path: /etc/kubernetes/pki
---
apiVersion: apiregistration.k8s.io/v1
kind: APIService
metadata:
  labels:
    k8s-app: metrics-server
  name: v1beta1.metrics.k8s.io
spec:
  group: metrics.k8s.io
  groupPriorityMinimum: 100
  insecureSkipTLSVerify: true
  service:
    name: metrics-server
    namespace: kube-system
  version: v1beta1
  versionPriority: 100 ' > ./metrics-server.yaml
kubectl  create -f .  

kubectl  top node

cat<<EOF | kubectl apply -f -
apiVersion: v1
kind: Pod
metadata:
  name: busybox
  namespace: default
spec:
  containers:
  - name: busybox
    image: busybox:1.28
    command:
      - sleep
      - "3600"
    imagePullPolicy: IfNotPresent
  restartPolicy: Always
EOF

[root@k8s-master01 CoreDNS]# kubectl exec busybox -n default – nslookup kubernetes
Server: 172.168.0.10
Address 1: 172.168.0.10 kube-dns.kube-system.svc.cluster.local

Name: kubernetes
Address 1: 172.168.0.1 kubernetes.default.svc.cluster.local

[root@k8s-master01 CoreDNS]# kubectl exec busybox -n default – nslookup kube-dns.kube-system
Server: 172.168.0.10
Address 1: 172.168.0.10 kube-dns.kube-system.svc.cluster.local

Name: kube-dns.kube-system
Address 1: 172.168.0.10 kube-dns.kube-system.svc.cluster.local

# 這個是在線安裝，官網里也有離線安裝什么的自己看吧
kubectl apply -f https://addons.kuboard.cn/kuboard/kuboard-v3.yaml