SpringCloud @FeignClient注入Spring容器原理分析
前言
本文分析@FeignClient注解如何別掃描并注入到spring容器中,重點分析 @EnableFeignClients工作原理。由于通過源碼分析涉及內容比較多建議根據文章中流程debug調試進行學習。
文章涉及 容器刷新模板方法,ConfigurationClassPostProcessor(bean工廠后置處理器),@Import注解等工作原理分析
@EnableFeignClients分析
在分析前先提出幾個問題:
- @EnableFeignClients通過什么原理可以把自己加到spring啟動的生命周期中完成feign的bean掃描?
- Sprintboot run方法如何能掃描 bean definition并放入spring容器中的?
- Springboot啟動階段設置了哪些BeanFactoryPostProcessor到容器中?
本文在分析的過程中會將上述問題逐一講解。在@EnableFeignClients注解中可以看到該注解主要功能:
- 掃描聲@FeignClient 注解聲明的類
- @FeignClient注解的類注入后可通過@Autowire @Component方式進行使用。類似@Configuration。
真正實現這些功能其實通過@Import注解+FeignClientsRegistrar類實現。
@Import 注解在spring啟動生命周期中通過組合 ImportSelector實現類或者 ImportBeanDefinitionRegistrar實現類完成bean definition 加載
@EnableFeignClients就是用過這種機制完成@FeignClient的掃描

在springboot中@Import 注解加載bean definition是通過Spring的后置處理器 BeanFactoryPostProcessor完成。
源碼調用分析
下面結合Springboot整體啟動的流程分析下@EnableFeignClients如何被加載的,主要分析關鍵邏輯具體細節不在此處展開。
- 首先SpringApplication run 方法啟動
- 執行refresh方法 該方法為 AbstractApplicationContext 模板方法
- 執行 invokeBeanFactoryPostProcessors方法 該方法會將實現了BeanDefinitionRegistryPostProcessor類的后置處理進行實例化并調用
- 執行 ConfigurationClassPostProcessor 后置處理處理@ComponentScan @Import @ImportResources @PropertySource等注解
- 調用FeignClientsRegistrar類的解析bean definition方法

接下來分析AbstractApplicationContext 的refresh方法中invokeBeanFactoryPostProcessors調用邏輯。
此方法主要實例化 BeanFactoryPostProcessor并調用 postProcessBeanFactory方法。
特別提示所有BeanFactoryPostProcessor實例化一定要在所有bean初始化前。

重點分析invokeBeanFactoryPostProcessors方法及bean后置處理器調用邏輯
PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(beanFactory, getBeanFactoryPostProcessors());
方法邏輯比較長但很好理解下圖中紅色框邏輯完全一樣都是從當前bean定義中找到 BeanDefinitionRegistryPostProcessor實現類然篩選出優先級注解類 PriorityOrdered跟排序注解類Ordered并調用完成所有bean的掃描并注冊到容器中掃描來源分為:注解&xml。

完成所有bean定義掃描類的后置處理器為 ConfigurationClassPostProcessor

ConfigurationClassPostProcessor 的 postProcessBeanDefinitionRegistry方法開始解析bean 定義。

postProcessBeanDefinitionRegistry中核心邏輯是通過配置類解析器進行解析,配置類一般為Springboot中@SpringbootApplication注解修飾類。

此處為Springboot啟動時解析入口 ,通過配置類分析


doProcessConfigurationClass方法開始解析各種常用注解如:@Component @Import等
protected final SourceClass doProcessConfigurationClass(
ConfigurationClass configClass, SourceClass sourceClass, Predicate<String> filter)
throws IOException {
if (configClass.getMetadata().isAnnotated(Component.class.getName())) {
// Recursively process any member (nested) classes first
processMemberClasses(configClass, sourceClass, filter);
}
// Process any @PropertySource annotations
for (AnnotationAttributes propertySource : AnnotationConfigUtils.attributesForRepeatable(
sourceClass.getMetadata(), PropertySources.class,
org.springframework.context.annotation.PropertySource.class)) {
if (this.environment instanceof ConfigurableEnvironment) {
processPropertySource(propertySource);
}
else {
logger.info("Ignoring @PropertySource annotation on [" + sourceClass.getMetadata().getClassName() +
"]. Reason: Environment must implement ConfigurableEnvironment");
}
}
// Process any @ComponentScan annotations
Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
if (!componentScans.isEmpty() &&
!this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) {
for (AnnotationAttributes componentScan : componentScans) {
// The config class is annotated with @ComponentScan -> perform the scan immediately
Set<BeanDefinitionHolder> scannedBeanDefinitions =
this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
// Check the set of scanned definitions for any further config classes and parse recursively if needed
for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
BeanDefinition bdCand = holder.getBeanDefinition().getOriginatingBeanDefinition();
if (bdCand == null) {
bdCand = holder.getBeanDefinition();
}
if (ConfigurationClassUtils.checkConfigurationClassCandidate(bdCand, this.metadataReaderFactory)) {
parse(bdCand.getBeanClassName(), holder.getBeanName());
}
}
}
}
// Process any @Import annotations
processImports(configClass, sourceClass, getImports(sourceClass), filter, true);
// Process any @ImportResource annotations
AnnotationAttributes importResource =
AnnotationConfigUtils.attributesFor(sourceClass.getMetadata(), ImportResource.class);
if (importResource != null) {
String[] resources = importResource.getStringArray("locations");
Class<? extends BeanDefinitionReader> readerClass = importResource.getClass("reader");
for (String resource : resources) {
String resolvedResource = this.environment.resolveRequiredPlaceholders(resource);
configClass.addImportedResource(resolvedResource, readerClass);
}
}
// Process individual @Bean methods
Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass);
for (MethodMetadata methodMetadata : beanMethods) {
configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass));
}
// Process default methods on interfaces
processInterfaces(configClass, sourceClass);
// Process superclass, if any
if (sourceClass.getMetadata().hasSuperClass()) {
String superclass = sourceClass.getMetadata().getSuperClassName();
if (superclass != null && !superclass.startsWith("java") &&
!this.knownSuperclasses.containsKey(superclass)) {
this.knownSuperclasses.put(superclass, configClass);
// Superclass found, return its annotation metadata and recurse
return sourceClass.getSuperClass();
}
}
// No superclass -> processing is complete
return null;
}本文分析@Import注解調用邏輯

解析Import注解中value并返回所有類

開始加載bean定義

loadBeanDefinitionsForConfigurationClass 方法開始加載Import注解中配置類。

通過調用棧信息最終找到執行FeignClientRegistrar接口

SpringBoot 注解加載流程邏輯
為了對Springboot中各個注解是在Spring生命周期每個階段時如何執行的可以參考下圖,具體流程可以單步debug進行分析

總結
本文簡單分析了SpringBoot加載bean definition與FeignClient加載流程,由于細節邏輯太多本文不在展開分析。
- SpringCloud中的@FeignClient注解使用詳解
- springcloud之FeignClient使用詳解
- SpringCloud之@FeignClient()注解的使用詳解
- SpringCloud FeignClient 超時設置
- SpringCloud全面解析@FeignClient標識接口的過程
- SpringCloud引入feign失敗或找不到@EnableFeignClients注解問題
- SpringCloud @FeignClient參數的用法解析
- SpringCloud之@FeignClient()注解的使用方式
- SpringCloud中FeignClient自定義配置
相關文章
@CacheEvict中的allEntries與beforeInvocation的區別說明
這篇文章主要介紹了@CacheEvict中的allEntries與beforeInvocation的區別說明,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-12-12
JAVA 實現磁盤文件加解密操作的示例代碼
這篇文章主要介紹了JAVA 實現磁盤文件加解密操作的示例代碼,幫助大家利用Java實現文件的加解密,感興趣的朋友可以了解下2020-09-09
java實現簡易飛機大戰
這篇文章主要為大家詳細介紹了java實現簡易飛機大戰,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2022-05-05
搭建Java開發環境JDK、IDE的詳細圖文教程
本文詳細介紹了如何搭建Java開發環境,包括下載JDK、配置環境變量、安裝IDE以及編寫和運行第一個Java程序,本文通過圖文并茂的形式給大家介紹的非常詳細,感興趣的朋友跟隨小編一起看看吧2025-11-11
Java利用poi實現word表格轉excel
這篇文章主要為大家詳細介紹了Java如何利用poi實現word表格轉excel,文中的示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起學習一下2025-03-03
SpringBoot項目速度提升之延遲初始化(Lazy Initialization)詳解
延遲初始化(Lazy?Initialization)是一種在需要時才創建或加載對象的策略,以減少啟動時間和資源消耗,本文就來講講延遲初始化的具體使用吧2023-05-05
HttpClient 請求 URL字符集轉碼問題
這篇文章主要介紹了HttpClient 請求 URL字符集轉碼問題,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-01-01
Java實現根據地址智能識別省市區縣
這篇文章主要為大家詳細介紹了如何編寫一個Java工具類,可以根據身份證地址或用戶輸入的地址,智能識別并提取出詳細的省市區縣信息,感興趣的小伙伴可以了解下2025-03-03

