C++使用alsa庫實現播放聲音文件

更新時間：2024年04月24日 08:38:01 作者：洛克希德馬丁

這篇文章主要為大家詳細介紹了Linux系統上C++如何使用alsa庫播放聲音文件,文中示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起學習一下

前言

平常讀麥克風的場景居多，有時候也需要播放一個聲音文件，這里就介紹怎么處理。

一、命令行

1.ffmpeg

ffmpeg -i <filename.wav> -f alsa default

2.aplay

aplay -i <filename.wav>

如果提示找不到aplay就安裝工具：

sudo apt install alsa-utils

二、代碼實現

main.cpp

#include <alsa/asoundlib.h>
#include <iostream>
#include <fstream>

#define PCM_DEVICE "default"http://默認的播放設備,你可以在settings里面調換

int main(int argc, char *argv[]) {
    const char *audioFilename = "../wakeup.wav";

    // 配置ALSA參數
    snd_pcm_t *pcmHandle;
    if (snd_pcm_open(&pcmHandle, PCM_DEVICE, SND_PCM_STREAM_PLAYBACK, 0) < 0) {
        std::cerr << "Error: Failed to open PCM device" << std::endl;
        return 1;
    }

    snd_pcm_hw_params_t *params;
    snd_pcm_hw_params_alloca(&params);
    snd_pcm_hw_params_any(pcmHandle, params);
    snd_pcm_hw_params_set_access(pcmHandle, params, SND_PCM_ACCESS_RW_INTERLEAVED);
    snd_pcm_hw_params_set_format(pcmHandle, params, SND_PCM_FORMAT_S16_LE);
    snd_pcm_hw_params_set_channels(pcmHandle, params, 2);
    unsigned int sampleRate = 48000;
    snd_pcm_hw_params_set_rate_near(pcmHandle, params, &sampleRate, nullptr);
    snd_pcm_uframes_t bufferSize = 512;
    snd_pcm_hw_params_set_buffer_size_near(pcmHandle, params, &bufferSize);
    snd_pcm_hw_params(pcmHandle, params);

    std::ifstream ifs("../wakeup.wav");
    if (ifs.is_open()) {
        std::string data;
        size_t size;
        char buffer[8192];
        while ((size = ifs.readsome(buffer, 8192)) > 0) {
            data.append(buffer, size);
        }
        snd_pcm_sframes_t err = snd_pcm_writei(pcmHandle, (const void *) data.c_str(),
                                               data.size()); 
        if (err < 0) {
            std::cerr << "Error: Failed to write PCM device" << std::endl;
        }
        ifs.close();
    }

    // 關閉PCM設備和文件
    snd_pcm_close(pcmHandle);
    return 0;
}

CMakeLists.txt

cmake_minimum_required(VERSION 3.10)
project(write_speaker)

set(CMAKE_CXX_STANDARD 11)

add_executable(${PROJECT_NAME} main.cpp)
target_link_libraries(${PROJECT_NAME} asound)

三、知識補充

C++使用Alsa采集linux音頻

1、運行時前先裝庫,sudo apt-get install libalsa

2遍tab自動提示出庫文件，選擇庫，alsa-ocaml-dev，最終的命令行為：sudo apt-get install libalsa-ocaml-dev

2、編譯執行腳本，gcc -o main main.c -lasound;

3、執行 ./main

以下是代碼

#include <stdlib.h>
#include <stdio.h>
#include <alsa/asoundlib.h>
#include <signal.h>
static int recording;

void stop_record(int param)
{
recording = 0;
}
void InitCapture(snd_pcm_t ** handle,snd_pcm_hw_params_t ** params,snd_pcm_uframes_t* frames,char ** buffer,int* size)
{
int ret;
unsigned int val;
int dir;
//打開設備
ret = snd_pcm_open(handle, “default”, SND_PCM_STREAM_CAPTURE, 0);
printf(“after open file\n”);
if (ret < 0)
{
fprintf(stderr, “unable to open device:%s\n”, snd_strerror(ret));
exit(1);
}
//分配一個硬件參數結構體
snd_pcm_hw_params_alloca(params);

//使用默認參數
snd_pcm_hw_params_any(*handle, *params);

//翻譯
    snd_pcm_hw_params_set_access(*handle, *params, SND_PCM_ACCESS_RW_INTERLEAVED);

//S16小端
snd_pcm_hw_params_set_format(*handle, *params, SND_PCM_FORMAT_S16_LE);

//雙通道，立體聲
snd_pcm_hw_params_set_channels(*handle, *params, 2);

//采樣率
val = 44100;
snd_pcm_hw_params_set_rate_near(*handle, *params,&val,&dir);

*frames = 32;
snd_pcm_hw_params_set_period_size_near(*handle, *params,frames,&dir);

//參數生效
ret = snd_pcm_hw_params(*handle, *params);
if (ret<0)
{
	fprintf(stderr, "unable to set hw parameters:%s\n", snd_strerror(ret));
		exit(1);
}
//得到一個周期的數據大小
snd_pcm_hw_params_get_period_size(*params, frames, &dir);

//16位雙通道，16位為2字節，2字節*2通道=4，假如frames=1024，則size是1024*4 = 4096
*size = *frames * 4;
*buffer = (char*)malloc(*size); 

//設置一個周期的時間長度
snd_pcm_hw_params_get_period_time(*params, &val, &dir);
}

void CaptureAudio(snd_pcm_t ** handle,snd_pcm_uframes_t* frames,char ** buffer,int* size,FILE ** pFile)
{
int ret;

recording = 1;
while (recording)
{
	ret = snd_pcm_readi(*handle, *buffer,*frames);
	if (ret == -EPIPE )
	{
		fprintf(stderr, "overrun occurred\n");
		snd_pcm_prepare(*handle);
	}
	else if (ret < 0)
	{
		fprintf(stderr, "error from read\n");
		snd_strerror(ret);
	}
	else if (ret != (int)(*frames))
	{
		fprintf(stderr, "short read %d frames\n",ret);
	}
	printf("write to file......%d\n", *size);
	//寫到標準輸出中去
	ret = fwrite(*buffer, sizeof(char), *size, *pFile);
	if (ret != *size)
	{
		fprintf(stderr, "short write :write %d bytes\n", ret);
	}
	if (signal(SIGINT, stop_record)==SIG_ERR)
	{
		fprintf(stderr, "signal failed\n");
	}
}
}

void CloseCaptureDevice(FILE ** pFile,snd_pcm_t ** handle,char ** buffer)
{
printf(“write file exit\n”);
snd_pcm_drain(*handle);
snd_pcm_close(*handle);
free(*buffer);
fclose(*pFile);
}

int main()
{
FILE * pFile;
pFile = fopen(“test.pcm”, “wb”);
int size;
//給文件操作分配一個句柄
snd_pcm_t * handle;
//硬件參數
snd_pcm_hw_params_t * params;
//
snd_pcm_uframes_t frames;
char * buffer;
printf(“before open file\n”);
InitCapture(&handle,&params,&frames,&buffer,&size);
CaptureAudio(&handle,&frames,&buffer,&size,&pFile);
CloseCaptureDevice(&pFile,&handle,&buffer);
printf(“write file exit\n”);

return 0;
}

到此這篇關于C++使用alsa庫實現播放聲音文件的文章就介紹到這了,更多相關C++ alsa播放聲音文件內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: