SpringBoot+aop實現主從數據庫的讀寫分離操作

更新時間：2024年03月04日 11:02:52 作者：A塵埃

讀寫分離的作用是為了緩解寫庫,也就是主庫的壓力,但一定要基于數據一致性的原則,就是保證主從庫之間的數據一定要一致,這篇文章給大家介紹SpringBoot+aop實現主從數據庫的讀寫分離操作,感興趣的朋友跟隨小編一起看看吧

讀寫分離的作用是為了緩解寫庫，也就是主庫的壓力，但一定要基于數據一致性的原則，就是保證主從庫之間的數據一定要一致。如果一個方法涉及到寫的邏輯，那么該方法里所有的數據庫操作都要走主庫。

一、環境部署

數據庫：MySql
2個，一主一從

DROP TABLE IF EXISTS `user`;
CREATE TABLE `user` (
  `user_id` bigint(20) NOT NULL COMMENT '用戶id',
  `user_name` varchar(255) DEFAULT '' COMMENT '用戶名稱',
  `user_phone` varchar(50) DEFAULT '' COMMENT '用戶手機',
  `address` varchar(255) DEFAULT '' COMMENT '住址',
  `weight` int(3) NOT NULL DEFAULT '1' COMMENT '權重，大者優先',
  `created_at` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間',
  `updated_at` datetime DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP COMMENT '更新時間',
  PRIMARY KEY (`user_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8;
INSERT INTO `user` VALUES ('1196978513958141952', '測試1', '18826334748', '廣州市海珠區', '1', '2019-11-20 10:28:51', '2019-11-22 14:28:26');
INSERT INTO `user` VALUES ('1196978513958141953', '測試2', '18826274230', '廣州市天河區', '2', '2019-11-20 10:29:37', '2019-11-22 14:28:14');
INSERT INTO `user` VALUES ('1196978513958141954', '測試3', '18826273900', '廣州市天河區', '1', '2019-11-20 10:30:19', '2019-11-22 14:28:30');

二、依賴

<dependencies>
        <dependency>
            <groupId>com.alibaba</groupId>
            <artifactId>druid-spring-boot-starter</artifactId>
            <version>1.1.10</version>
        </dependency>
        <dependency>
            <groupId>org.mybatis.spring.boot</groupId>
            <artifactId>mybatis-spring-boot-starter</artifactId>
            <version>1.3.2</version>
        </dependency>
        <dependency>
            <groupId>tk.mybatis</groupId>
            <artifactId>mapper-spring-boot-starter</artifactId>
            <version>2.1.5</version>
        </dependency>
        <dependency>
            <groupId>mysql</groupId>
            <artifactId>mysql-connector-java</artifactId>
            <version>8.0.16</version>
        </dependency>
        <!-- 動態數據源 所需依賴 ### start-->
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-jdbc</artifactId>
            <scope>provided</scope>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-aop</artifactId>
            <scope>provided</scope>
        </dependency>
        <!-- 動態數據源 所需依賴 ### end-->
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>
        <dependency>
            <groupId>org.projectlombok</groupId>
            <artifactId>lombok</artifactId>
            <optional>true</optional>
        </dependency>
        <dependency>
            <groupId>com.alibaba</groupId>
            <artifactId>fastjson</artifactId>
            <version>1.2.4</version>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-test</artifactId>
            <scope>test</scope>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-data-jpa</artifactId>
        </dependency>
</dependencies>

三、application.yml配置主從數據源

server:
  port: 8001
spring:
  jackson:
      date-format: yyyy-MM-dd HH:mm:ss
      time-zone: GMT+8
  datasource:
    type: com.alibaba.druid.pool.DruidDataSource
    driver-class-name: com.mysql.cj.jdbc.Driver
    master:
      url: jdbc:mysql://127.0.0.1:3307/user?serverTimezone=Asia/Shanghai&useUnicode=true&characterEncoding=UTF-8&autoReconnect=true&failOverReadOnly=false&useSSL=false&zeroDateTimeBehavior=convertToNull&allowMultiQueries=true
      username: root
      password:
    slave:
      url: jdbc:mysql://127.0.0.1:3308/user?serverTimezone=Asia/Shanghai&useUnicode=true&characterEncoding=UTF-8&autoReconnect=true&failOverReadOnly=false&useSSL=false&zeroDateTimeBehavior=convertToNull&allowMultiQueries=true
      username: root
      password:

四、Config配置

@Getter
public enum DynamicDataSourceEnum {
    MASTER("master"),
    SLAVE("slave");
    private String dataSourceName;
    DynamicDataSourceEnum(String dataSourceName) {
        this.dataSourceName = dataSourceName;
    }
}

@Configuration
@MapperScan(basePackages = "com.xjt.proxy.mapper", sqlSessionTemplateRef = "sqlTemplate")
public class DataSourceConfig{
	//主庫
	@Bean
	@ConfigurationProperties(prefix = "spring.datasource.master")
	public DataSource masterDb(){
		return DruidDataSourceBuilder.create().build();
	}
	//從庫
	@Bean
    @ConditionalOnProperty(prefix = "spring.datasource", name = "slave", matchIfMissing = true)
    @ConfigurationProperties(prefix = "spring.datasource.slave")
    public DataSource slaveDb() {
        return DruidDataSourceBuilder.create().build();
    }
	//主從動態配置
	@Bean
	public DynamicDataSource dynamicDb(@Qualifier("masterDb") DataSource masterDataSource,
        @Autowired(required = false) @Qualifier("slaveDb") DataSource slaveDataSource){
		DynamicDataSource dynamicDataSource = new DynamicDataSource();
		Map<Object,Object> targetDataSources = new HashMap<>();
		targetDataSources.put(DynamicDataSourceEnum.MASTER.getDataSourceName(), masterDataSource);
		if(slaveDataSource != null){
			targetDataSources.put(DynamicDataSourceEnum.SLAVE.getDataSourceName(), slaveDataSource);
		}
		dynamicDataSource.setTargetDataSources(targetDataSources);
        dynamicDataSource.setDefaultTargetDataSource(masterDataSource);
        return dynamicDataSource;
	}
	@Bean
	public SqlSessionFactory sessionFactory(){
		SqlSessionFactoryBean bean = new SqlSessionFactoryBean();
        bean.setMapperLocations(
            new PathMatchingResourcePatternResolver().getResources("classpath*:mapper/*Mapper.xml"));
        bean.setDataSource(dynamicDataSource);
        return bean.getObject();
	}
	@Bean
	public SqlSessionTemplate sqlTemplate(){
		return new SqlSessionTemplate(sqlSessionFactory);
	}
	@Bean(name = "dataourceTx")
	public DataSourceTransactionManager dataSourceTx(){
		DataSourceTransactionManager dataSourceTransactionManager = new DataSourceTransactionManager();
        dataSourceTransactionManager.setDataSource(dynamicDataSource);
        return dataSourceTransactionManager;
	}
}

五、設置路由

為了方便查找對應的數據源，我們可以用ThreadLocal保存數據源的信息到每個線程中，方便我們需要時獲取

pubic class DataSourceContextHolder{
	private static final ThreadLocal<String> DYNAMIC_DATASOURCE_CONTEXT = new ThreadLocal<>();
	public static void set(String datasourceType) {
        DYNAMIC_DATASOURCE_CONTEXT.set(datasourceType);
    }
    public static String get() {
        return DYNAMIC_DATASOURCE_CONTEXT.get();
    }
    public static void clear() {
        DYNAMIC_DATASOURCE_CONTEXT.remove();
    }
}

AbstractRoutingDataSource的作用是基于查找key路由到對應的數據源，它內部維護了一組目標數據源，并且做了路由key與目標數據源之間的映射，提供基于key查找數據源的方法。

public class DynamicDataSource extends AbstractRoutingDataSource {
    @Override
    protected Object determineCurrentLookupKey() {
        return DataSourceContextHolder.get();
    }
}

六、數據源的注解

方便切換數據源，注解中包含數據源對應的枚舉值，默認是主庫

@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.METHOD)
@Documented
public @interface DataSourceSelector {
    DynamicDataSourceEnum value() default DynamicDataSourceEnum.MASTER;
    boolean clear() default true;
}

七、Aop切換數據源

定義一個aop類，對有注解的方法做切換數據源的操作

@Slf4j
@Aspect
@Order(value = 1)
@Component
public class DataSourceContextAop {
 @Around("@annotation(com.xjt.proxy.dynamicdatasource.DataSourceSelector)")
    public Object setDynamicDataSource(ProceedingJoinPoint pjp) throws Throwable {
        boolean clear = true;
        try {
            Method method = this.getMethod(pjp);
            DataSourceSelector dataSourceImport = method.getAnnotation(DataSourceSelector.class);//獲取注解標注的方法
            clear = dataSourceImport.clear();
            DataSourceContextHolder.set(dataSourceImport.value().getDataSourceName());
            log.info("========數據源切換至：{}", dataSourceImport.value().getDataSourceName());
            return pjp.proceed();
        } finally {
            if (clear) {
                DataSourceContextHolder.clear();
            }
        }
    }
    private Method getMethod(JoinPoint pjp) {
        MethodSignature signature = (MethodSignature)pjp.getSignature();
        return signature.getMethod();
    }
}

八、測試

寫好Service文件，包含讀取和更新兩個方法

@Service
public class UserService {
    @Autowired
    private UserMapper userMapper;
    @DataSourceSelector(value = DynamicDataSourceEnum.SLAVE)
    public List<User> listUser() {
        List<User> users = userMapper.selectAll();
        return users;
    }
    @DataSourceSelector(value = DynamicDataSourceEnum.MASTER)
    public int update() {
        User user = new User();
        user.setUserId(Long.parseLong("1196978513958141952"));
        user.setUserName("修改后的名字2");
        return userMapper.updateByPrimaryKeySelective(user);
    }
    @DataSourceSelector(value = DynamicDataSourceEnum.SLAVE)
    public User find() {
        User user = new User();
        user.setUserId(Long.parseLong("1196978513958141952"));
        return userMapper.selectByPrimaryKey(user);
    }
}

根據方法上的注解可以看出，讀的方法走從庫，更新的方法走主庫，更新的對象是userId為1196978513958141953 的數據

@RunWith(SpringRunner.class)
@SpringBootTest
class UserServiceTest {
    @Autowired
    UserService userService;
    @Test
    void listUser() {
        List<User> users = userService.listUser();
        for (User user : users) {
            System.out.println(user.getUserId());
            System.out.println(user.getUserName());
            System.out.println(user.getUserPhone());
        }
    }
    @Test
    void update() {
        userService.update();
        User user = userService.find();
        System.out.println(user.getUserName());
    }
}

讀取方法

在這里插入圖片描述

更新方法

在這里插入圖片描述

執行之后，比對數據庫就可以發現主從庫都修改了數據，說明我們的讀寫分離是成功的。當然，更新方法可以指向從庫，這樣一來就只會修改到從庫的數據，而不會涉及到主庫。

到此這篇關于SpringBoot+aop實現主從數據庫的讀寫分離的文章就介紹到這了,更多相關SpringBoot主從數據庫的讀寫分離內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: