快捷導航

C++實現獲取指定代碼段的cpu占用

更新時間：2023年12月28日 10:24:52 作者：BuffaloX_X

這篇文章主要為大家詳細介紹了C++實現獲取指定代碼段的cpu占用的相關知識,文中的示例代碼講解詳細,具有一定的借鑒價值,有需要的小伙伴可以參考一下

windows

#include <iostream>
#include <windows.h>
#include <vector>
 
class CodeSegmentCPUMonitor {
public:
    static CodeSegmentCPUMonitor& getInstance() {
        static CodeSegmentCPUMonitor instance;
        return instance;
    }
 
    ~CodeSegmentCPUMonitor() {
        // 獲取結束性能計數器值
        QueryPerformanceCounter(&endCounter);
 
        // 計算運行時間（秒）
        double elapsedTime = static_cast<double>(endCounter.QuadPart - startCounter.QuadPart) / frequency.QuadPart;
 
        // 計算 CPU 平均占用
        double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
 
        std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
    }
 
    void enterCodeSegment() {
        // 進入代碼段時記錄開始時間
        QueryPerformanceCounter(&codeSegmentStartCounter);
    }
 
    void exitCodeSegment() {
        // 退出代碼段時記錄結束時間
        QueryPerformanceCounter(&codeSegmentEndCounter);
 
        // 計算代碼段的 CPU 占用
        ULONGLONG codeSegmentCycles = codeSegmentEndCounter.QuadPart - codeSegmentStartCounter.QuadPart;
        totalCycles += codeSegmentCycles;
    }
 
private:
    LARGE_INTEGER frequency;
    LARGE_INTEGER startCounter;
    LARGE_INTEGER endCounter;
 
    LARGE_INTEGER codeSegmentStartCounter;
    LARGE_INTEGER codeSegmentEndCounter;
 
    ULONGLONG totalCycles = 0;
 
    // 假設處理器速度為 2.5 GHz，你需要根據實際情況調整這個值
    const double processorSpeed = 2.5e9;
 
    CodeSegmentCPUMonitor() {
        // 獲取性能計數器頻率
        if (QueryPerformanceFrequency(&frequency)) {
            // 獲取初始性能計數器值
            QueryPerformanceCounter(&startCounter);
        } else {
            std::cerr << "Failed to get performance counter frequency.\n";
        }
    }
 
    // 禁用拷貝構造函數和賦值運算符
    CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
    CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
 
int main() {
    // Example: Measure CPU usage for code segment 1
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 1 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // Example: Measure CPU usage for code segment 2
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 2 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // ... Add more code segments as needed ...
 
    return 0;
}

linux

#include <iostream>
#include <vector>
#include <ctime>
 
class CodeSegmentCPUMonitor {
public:
    static CodeSegmentCPUMonitor& getInstance() {
        static CodeSegmentCPUMonitor instance;
        return instance;
    }
 
    ~CodeSegmentCPUMonitor() {
        // 獲取結束時間
        struct timespec endTime;
        clock_gettime(CLOCK_MONOTONIC, &endTime);
 
        // 計算運行時間（秒）
        double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
                             static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
 
        // 計算 CPU 平均占用
        double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
 
        std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
    }
 
    void enterCodeSegment() {
        // 進入代碼段時記錄開始時間
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
    }
 
    void exitCodeSegment() {
        // 退出代碼段時記錄結束時間
        struct timespec codeSegmentEndTime;
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
 
        // 計算代碼段的 CPU 占用
        double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
                                        static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
        totalCycles += codeSegmentElapsedTime;
    }
 
private:
    struct timespec startTime;
    struct timespec codeSegmentStartTime;
 
    double totalCycles = 0;
 
    // 假設處理器速度為 2.5 GHz，你需要根據實際情況調整這個值
    const double processorSpeed = 2.5e9;
 
    CodeSegmentCPUMonitor() {
        // 獲取初始時間
        clock_gettime(CLOCK_MONOTONIC, &startTime);
    }
 
    // 禁用拷貝構造函數和賦值運算符
    CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
    CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
 
int main() {
    // Example: Measure CPU usage for code segment 1
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 1 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // Example: Measure CPU usage for code segment 2
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 2 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // ... Add more code segments as needed ...
 
    return 0;
}

linux和windows條件編譯

#include <iostream>
 
#ifdef _WIN32
#include <windows.h>
#else
#include <ctime>
#endif
 
class CodeSegmentCPUMonitor {
public:
    static CodeSegmentCPUMonitor& getInstance() {
        static CodeSegmentCPUMonitor instance;
        return instance;
    }
 
    ~CodeSegmentCPUMonitor() {
#ifdef _WIN32
        FILETIME endTime;
        GetSystemTimeAsFileTime(&endTime);
        ULARGE_INTEGER endTime64;
        endTime64.LowPart = endTime.dwLowDateTime;
        endTime64.HighPart = endTime.dwHighDateTime;
        double elapsedTime = static_cast<double>(endTime64.QuadPart - startTime.QuadPart) / frequency.QuadPart;
#else
        struct timespec endTime;
        clock_gettime(CLOCK_MONOTONIC, &endTime);
        double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
                             static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
#endif
 
        double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
 
        std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
    }
 
    void enterCodeSegment() {
#ifdef _WIN32
        GetSystemTimeAsFileTime(&codeSegmentStartTime);
#else
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
#endif
    }
 
    void exitCodeSegment() {
#ifdef _WIN32
        FILETIME codeSegmentEndTime;
        GetSystemTimeAsFileTime(&codeSegmentEndTime);
        ULARGE_INTEGER codeSegmentEndTime64;
        codeSegmentEndTime64.LowPart = codeSegmentEndTime.dwLowDateTime;
        codeSegmentEndTime64.HighPart = codeSegmentEndTime.dwHighDateTime;
        double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime64.QuadPart - codeSegmentStartTime.QuadPart) / frequency.QuadPart;
#else
        struct timespec codeSegmentEndTime;
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
        double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
                                        static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
#endif
 
        totalCycles += codeSegmentElapsedTime;
    }
 
private:
#ifdef _WIN32
    LARGE_INTEGER frequency;
    LARGE_INTEGER startTime;
    FILETIME codeSegmentStartTime;
#else
    struct timespec startTime;
    struct timespec codeSegmentStartTime;
#endif
 
    double totalCycles = 0;
    const double processorSpeed = 2.5e9;
 
    CodeSegmentCPUMonitor() {
#ifdef _WIN32
        QueryPerformanceFrequency(&frequency);
        QueryPerformanceCounter(&startTime);
#else
        clock_gettime(CLOCK_MONOTONIC, &startTime);
#endif
    }
 
    CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
    CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
 
int main() {
    // Example: Measure CPU usage for code segment 1
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 1 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // Example: Measure CPU usage for code segment 2
    {
        CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
 
        // Your code segment 2 here
 
        CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
    }
 
    // ... Add more code segments as needed ...
 
    return 0;
}

解耦log接口的形式1

#include <iostream>
#include <string>
 
// CPU Monitor Output Interface
class CPUMonitorOutputInterface {
public:
    virtual ~CPUMonitorOutputInterface() {}
    virtual void log(const std::string& message) = 0;
};
 
// ConsoleLogger: 實現CPUMonitorOutputInterface的一個Logger類示例
class ConsoleLogger : public CPUMonitorOutputInterface {
public:
    void log(const std::string& message) override {
        std::cout << "Logger: " << message << std::endl;
    }
};
 
class CodeSegmentCPUMonitor {
public:
    CodeSegmentCPUMonitor(CPUMonitorOutputInterface& logger) : logger(logger) {
#ifdef _WIN32
        QueryPerformanceFrequency(&frequency);
        QueryPerformanceCounter(&startTime);
#else
        clock_gettime(CLOCK_MONOTONIC, &startTime);
#endif
    }
 
    ~CodeSegmentCPUMonitor() {
#ifdef _WIN32
        FILETIME endTime;
        GetSystemTimeAsFileTime(&endTime);
        ULARGE_INTEGER endTime64;
        endTime64.LowPart = endTime.dwLowDateTime;
        endTime64.HighPart = endTime.dwHighDateTime;
        double elapsedTime = static_cast<double>(endTime64.QuadPart - startTime.QuadPart) / frequency.QuadPart;
#else
        struct timespec endTime;
        clock_gettime(CLOCK_MONOTONIC, &endTime);
        double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
                             static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
#endif
 
        double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
        logger.log("Total Average CPU Usage: " + std::to_string(averageCPUUsage) + "%");
    }
 
    void enterCodeSegment() {
#ifdef _WIN32
        GetSystemTimeAsFileTime(&codeSegmentStartTime);
#else
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
#endif
    }
 
    void exitCodeSegment() {
#ifdef _WIN32
        FILETIME codeSegmentEndTime;
        GetSystemTimeAsFileTime(&codeSegmentEndTime);
        ULARGE_INTEGER codeSegmentEndTime64;
        codeSegmentEndTime64.LowPart = codeSegmentEndTime.dwLowDateTime;
        codeSegmentEndTime64.HighPart = codeSegmentEndTime.dwHighDateTime;
        double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime64.QuadPart - codeSegmentStartTime.QuadPart) / frequency.QuadPart;
#else
        struct timespec codeSegmentEndTime;
        clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
        double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
                                        static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
#endif
 
        totalCycles += codeSegmentElapsedTime;
    }
 
private:
    CPUMonitorOutputInterface& logger;
 
#ifdef _WIN32
    LARGE_INTEGER frequency;
    LARGE_INTEGER startTime;
    FILETIME codeSegmentStartTime;
#else
    struct timespec startTime;
    struct timespec codeSegmentStartTime;
#endif
 
    double totalCycles = 0;
    const double processorSpeed = 2.5e9;
};
 
int main() {
    // Example: Measure CPU usage for code segment 1 with ConsoleLogger
    {
        ConsoleLogger consoleLogger;
        CodeSegmentCPUMonitor monitor(consoleLogger);
        monitor.enterCodeSegment();
 
        // Your code segment 1 here
 
        monitor.exitCodeSegment();
    }
 
    // Example: Measure CPU usage for code segment 2 with ConsoleLogger
    {
        ConsoleLogger consoleLogger;
        CodeSegmentCPUMonitor monitor(consoleLogger);
        monitor.enterCodeSegment();
 
        // Your code segment 2 here
 
        monitor.exitCodeSegment();
    }
 
    // ... Add more code segments as needed ...
 
    return 0;
}

到此這篇關于C++實現獲取指定代碼段的cpu占用的文章就介紹到這了,更多相關C++獲取cpu占用內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: