springboot中請求地址轉發的兩種方案
一、背景需求
現有一個平臺,如果在上面發布軟件,需要在平臺注冊所有的接口,注冊好后平臺會給每一個接口都提供一個不同的新地址(所有的請求在平臺注冊后都是類似"http://localhost:8080/{appkey}/{token}"的格式,每個接口都擁有一個不同的appkey作為標識,token可通過另一個請求獲?。?,在前端調用請求的時候,必須請求平臺提供的地址,然后平臺會替前端轉發到真實的地址去請求后端。
為了減少注冊和審核的工作量,我們可以只注冊少量接口,然后在這些接口內我們自行轉發。
二、方案一
zuul轉發:
在平臺注冊增刪改查等若干個虛擬的接口地址,然后在前端將所有接口封裝成這些虛擬接口,并在請求參數內傳遞真實的接口地址,通過平臺轉發到后端之后我們通過zuul過濾器再轉發到自己真實的接口地址上。(注:登錄接口比較特殊,登錄在后端是寫在主服務內的,zuul網關不會進行攔截,這里單獨注冊;其余接口統一寫在同一個服務內,便于統一轉發配置)
前端代碼演示:
這里是在vue中寫的一個axios的請求攔截器,統一對真實接口進行封裝
舉個例:
我們在平臺上注冊一個虛擬地址:
http://localhost:8080/comSelect/getData
=>
注冊后請求地址變?yōu)椋?br />http://xxx.xxx.xxx:xxxx/appKeySelect123/{token}
axios.interceptors.request.use(
config => {
if (!config.url.startsWith("http")) {
//模擬一個token,真實token可通過平臺提供的另一請求獲取
let token = "token";
//將接口地址放在covertUrl參數內傳遞給后端
if (config.method == "post") {
//post請求的兩種content-type格式
if (typeof config.data == "string") {
//請求參數表單格式
//qs可用于格式化參數
let conData = qs.parse(config.data);
conData.covertUrl = config.url;
config.data = qs.stringify(conData);
} else {
//請求體格式
config.data.covertUrl = config.url;
}
} else if (config.method == "get"){
//axios中g(shù)et請求可用params指定url傳值
config.params.covertUrl = config.url;
}
//封裝成平臺要求的請求地址,真實的url存于參數covertUrl中
config.url = urlPack(token, config.url);
}
return config;
},
error => {
return Promise.reject(error);
}
);
//接口地址封裝,將所有接口統一分為增刪改查四個接口
function urlPack(token, url) {
let appKey;
//登陸
let appKeyLogin = "/appKeyLogin123/";
//增
let appKeyAdd = "/appKeyAdd123/";
//刪
let appKeyDelete = "/appKeyDelete123/";
//改
let appKeyUpdate = "/appKeyUpdate123/";
//查
let appKeySelect = "/appKeySelect123/"; //http://localhost:8080/comSelect/getData
//隨便拿幾個接口舉例
switch (url) {
case "/sysUser/app_login":
appKey = appKeyLogin;
break;
case "/appcommon/appVersion/getVersion":
appKey = appKeySelect;
break;
case "/appcommon/appMenu/getMenu":
appKey = appKeySelect;
break;
}
return "http://localhost:8080" + appKey + token;
}
后端代碼演示:
#這里需要注意,必須在zuul的路由配置里添加平臺轉發之后傳遞過來的虛擬路由,不然zuul會報出找不到路由的錯
zuul:
#路由添加
routes:
#虛擬服務地址
comSelect:
path: /comSelect/**
#真實的路由服務,這里的地址是真實注冊到了eureka的服務地址,也可以動態獲取
appcommon:
path: /appcommon/**
serviceId: appcommon
/**
* 轉換成真正的url地址,路由轉發
*/
@Slf4j
@Component
public class ZuulAppRouteFilter extends ZuulFilter {
/**
* filterType:返回一個字符串代表過濾器的類型,在zuul中定義了四種不同生命周期的過濾器類型,具體如下:
* pre:路由之前
* routing:路由之時
* post: 路由之后
* error:發送錯誤調用
*/
@Override
public String filterType() {
return FilterConstants.ROUTE_TYPE;
}
/**
* 過濾器優先級,同一filterType下的過濾器,數值越大優先級越低
*/
@Override
public int filterOrder() {
return 1;
}
/**
* 是否啟用過濾器,這里可以做一些邏輯判斷
*/
@Override
public boolean shouldFilter() {
return true;
}
@Override
public Object run() throws ZuulException {
RequestContext ctx = RequestContext.getCurrentContext();
HttpServletRequest request = ctx.getRequest();
//真正的接口地址
String path = "";
try {
//請求參數(url傳值或表單傳值)
Map<String, String[]> parameterMap = request.getParameterMap();
//請求參數(請求體)
String requestBody = null;
try {
requestBody = StreamUtils.copyToString(request.getInputStream(), StandardCharsets.UTF_8);
} catch (IOException e) {
e.printStackTrace();
}
if (parameterMap.size() == 0) {
if (requestBody != null && !"".equals(requestBody)) {
try {
JSONObject jsonObj = JSONObject.parseObject(requestBody);
if (jsonObj.get("covertUrl") != null) {
Object covertUrl = jsonObj.get("covertUrl");
path = String.valueOf(covertUrl);
}
} catch (Exception e) {
log.error("path[" + path + "]返回的不是json格式數據,返回信息:" + requestBody);
}
}
} else {
if (parameterMap.get("covertUrl") != null) {
String[] description = parameterMap.get("covertUrl");
path = URLDecoder.decode(description[0]);
}
}
//所有的服務全部指向serviceId為appcommon這個路由
//如果需要轉發到其他服務則通過判斷path來寫判斷
String serviceId = "";
if (path.contains("appcommon")) {
serviceId = "appcommon";
} else if (path.contains("sync")) {
serviceId = "sync";
}
//請求地址轉發到真實的接口上
ctx.put(FilterConstants.REQUEST_URI_KEY, path);
} catch (Exception ignored) {
log.error(request.getRequestURL().toString() + "解析失敗");
}
return null;
}
}
三、方案二:
java反射:
在平臺注冊增刪改查等若干個接口地址,并在后端編寫這些接口作為統一分發接口,然后在前端將所有接口封裝成這些接口,并在請求參數內傳遞接口的類名和對應的方法名,通過平臺轉發傳遞到后端之后,后端利用Java的反射機制調用真實的接口地址,轉發到對應的接口上。
前端代碼演示:
舉個例:
我們在平臺上注冊的地址:
http://localhost:8080/appcommon/common/query
=>
注冊后請求地址變?yōu)椋?br />http://localhost:8080/appKeySelect123/{token}
axios.interceptors.request.use(
config => {
if (!config.url.startsWith("http")) {
//模擬一個token,真實token可通過平臺提供的另一請求獲取
let token = "token";
let req;
if (config.method == "post") {
if (typeof config.data == "string") {
//請求參數表單格式
let conData = qs.parse(config.data);
config.data = qs.stringify(conData);
req = reqPack(token, config.url, config.data);
config.url = req.url;
config.data = req.reqData;
} else {
//請求體格式
req = reqPack(token, config.url, config.data);
config.url = req.url;
config.data = req.reqData;
}
} else {
req = reqPack(token, config.url, config.params);
config.url = req.url;
config.params = req.reqData;
}
//封裝成平臺要求的請求地址,真實的url存于參數covertUrl中
config.url = urlPack(token, config.url);
}
return config;
},
error => {
return Promise.reject(error);
}
);
//接口地址封裝,將所有接口統一分為增刪改查四個接口
function urlPack(token, url, data) {
//總線所需的key
let appKey;
//登陸
let appKeyLogin = "/appKeyLogin123/";
//增
let appKeyAdd = "/appKeyAdd123/";
//刪
let appKeyDelete = "/appKeyDelete123/";
//改
let appKeyUpdate = "/appKeyUpdate123/";
//查
let appKeySelect = "/appKeySelect123/"; //http://localhost:8080/appcommon/common/query
//請求參數
let reqData = {
//類名
className: "",
//方法名
methodName: "",
//接口所需參數
params: data
}
//指定不同接口的類名和方法名,用于分發調用
switch (url) {
//登錄請求比較特殊,單獨注冊,參數不封裝
case "/sysUser/app_login":
appKey = appLogin;
return {
url: GLOBAL.$RequestBaseUrl1 + appKey,
reqData: data
}
break;
case "/appcommon/appVersion/getVersion":
appKey = appKeySelect;
reqData.className = "AppVersionController";
reqData.methodName = "getAppVersion";
break;
case "/sync/risk/road/getAllRoad":
appKey = appKeySelect;
break;
case "/appcommon/appMenu/getMenu":
appKey = appKeySelect;
reqData.className = "AppMenuController";
reqData.methodName = "getMenu";
break;
}
return {
url: GLOBAL.$RequestBaseUrl1 + appKey + token,
reqData: reqData
};
}
后端代碼演示:
/**
* 公共接口實例
*/
@Data
public class CommonObj {
/**
* 類名
*/
private String className;
/**
* 方法名
*/
private String methodName;
/**
* 實際參數
*/
private Map<String,Object> params;
}
/**
* Spring定義的類實現ApplicationContextAware接口會自動的將應用程序上下文加入
*/
@Slf4j
@Component
public class MySpringUtil implements ApplicationContextAware {
//上下文對象實例
private static ApplicationContext applicationContext;
@Override
public void setApplicationContext(ApplicationContext applicationContext) throws BeansException {
if (MySpringUtil.applicationContext == null) {
MySpringUtil.applicationContext = applicationContext;
}
}
//獲取applicationContext
public static ApplicationContext getApplicationContext() {
return applicationContext;
}
//通過name獲取 Bean.
public static Object getBean(String name) {
return getApplicationContext().getBean(name);
}
//通過class獲取Bean.
public static <T> T getBean(Class<T> clazz) {
return getApplicationContext().getBean(clazz);
}
//通過name,以及Clazz返回指定的Bean
public static <T> T getBean(String name, Class<T> clazz) {
return getApplicationContext().getBean(name, clazz);
}
}
/**
* app公共接口調用,通過反射分發調用接口
*
* @author xht
*/
@RestController
@RequestMapping("/common")
@Slf4j
public class CommonController {
/**
* 利用反射調用接口
*/
public Response reflectControl(CommonObj commonObj){
String className = commonObj.getClassName();
String methodName = commonObj.getMethodName();
Map<String, Object> params = commonObj.getParams();
Response response;
try {
//1、獲取spring容器中的Bean
//類名首字母小寫
className = StringUtils.uncapitalize(className);
Object proxyObject = MySpringUtil.getBean(className);
//2、利用bean獲取class對象,進而獲取本類以及父類或者父接口中所有的公共方法(public修飾符修飾的)
Method[] methods = proxyObject.getClass().getMethods();
//3、獲取指定的方法
Method myMethod = null;
for (Method method : methods) {
if (method.getName().equalsIgnoreCase(methodName)) {
myMethod = method;
break;
}
}
//4、封裝方法需要的參數
if (myMethod != null) {
Object resObj;
resObj = myMethod.invoke(proxyObject, params);
response = (Response) resObj;
} else {
response = Response.error("未找到對應方法");
}
} catch (Exception e) {
e.printStackTrace();
response = Response.error(e.getMessage());
}
return response;
}
/**
* 公共新增接口
*/
@PostMapping("/add")
public Response commonAdd(@RequestBody CommonObj commonObj) {
return reflectControl(commonObj);
}
/**
* 公共刪除接口
*/
@PostMapping("/delete")
public Response commonDelete(@RequestBody CommonObj commonObj) {
return reflectControl(commonObj);
}
/**
* 公共修改接口
*/
@PostMapping("/edit")
public Response commonEdity(@RequestBody CommonObj commonObj) {
return reflectControl(commonObj);
}
/**
* 公共查詢接口
*/
@PostMapping("/query")
public Response commonQuery(@RequestBody CommonObj commonObj) {
return reflectControl(commonObj);
}
}到此這篇關于springboot中請求地址轉發的兩種方案的文章就介紹到這了,更多相關springboot 請求地址轉發內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
RocketMq同組消費者如何自動設置InstanceName
這篇文章主要介紹了RocketMq同組消費者如何自動設置InstanceName問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-06-06
Java中通過ZipOutputStream類如何將多個文件打成zip
ZipOutputStream?是Java中用于創建ZIP文件的類,它是?java.util.zip?包中的一部分,通過使用?ZipOutputStream?,可以將多個文件壓縮到一個ZIP文件中,這篇文章主要介紹了Java中(ZipOutputStream)如何將多個文件打成zip,需要的朋友可以參考下2023-09-09
詳解Spring依賴注入的三種方式使用及優缺點
這篇文章主要介紹了spring依賴注入的三種方式的使用方法,以及優缺點的介紹,通過代碼示例介紹的非常詳細,感興趣的小伙伴可以參考一下2023-04-04
java分析html算法(java網頁蜘蛛算法示例)
近來有些朋友在做蜘蛛算法,或者在網頁上面做深度的數據挖掘,下面使用示例2014-03-03
Java異常處理3個避坑神操作總結(告別崩潰式報錯)
日常Java開發中,有些細節看似微小,卻能大幅影響代碼質量,這篇文章主要介紹了Java異常處理3個避坑神操作總結的相關資料,文中通過代碼介紹的非常詳細,需要的朋友可以參考下2026-04-04

