SpringMvc中容器加載的過程源碼詳解
了解springmvc
springmvc是基于spring的一個web層框架,同樣也是web層框架的有struts,struts2等等,但是struts因為漏洞等問題,被慢慢淘汰了,現在基本都在用springmvc; 相信以前面試的時候總是背了springmvc的執行流程:
SpringMVC流程
1、 用戶發送請求至前端控制器DispatcherServlet。
2、 DispatcherServlet收到請求調用HandlerMapping處理器映射器。
3、 處理器映射器找到具體的處理器(可以根據xml配置、注解進行查找),生成處理器對象及處理器攔截器(如果有則生成)一并返回給DispatcherServlet。
4、 DispatcherServlet調用HandlerAdapter處理器適配器。
5、 HandlerAdapter經過適配調用具體的處理器(Controller,后端控制器)。
6、 Controller執行完成返回ModelAndView。
7、 HandlerAdapter將controller執行結果ModelAndView返回給DispatcherServlet。
8、 DispatcherServlet將ModelAndView傳給ViewReslover視圖解析器。
9、 ViewReslover解析后返回具體View。
10、DispatcherServlet根據View進行渲染視圖(即將模型數據填充至視圖中)。
11、 DispatcherServlet響應用戶。
雖然背的挺熟,但是沒有看過源碼,印象總不是很深;因為springmvc基本都有用過,所以有些地方就簡述了;

啟動流程
首先,我們看一下在web.xml配置的一些東西:
<!-- Spring監聽器 --> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <context-param> <param-name>contextConfigLocation</param-name> <param-value>classpath:/config/beans.xml</param-value> </context-param> <!-- Spring MVC servlet --> <servlet> <servlet-name>SpringMVC</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <init-param> <param-name>contextConfigLocation</param-name> <param-value>classpath:spring-mvc.xml</param-value> </init-param> <load-on-startup>1</load-on-startup> <async-supported>true</async-supported> </servlet> <servlet-mapping> <servlet-name>SpringMVC</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping>
前面一個是配置spring容器的,后面就是配置springmvc的;DispatcherServlet顧名思義,是一個servlet,先看看DispatcherServlet的類圖:

httpServietBean的init方法
關于servlet就不做過多描述了,servlet入口就是init方法,我們從init方法看,先執行g(shù)enericServlet的init然后genericServlet又是執行子類httpServietBean的init方法:
@Override
public final void init() throws ServletException {
if (logger.isDebugEnabled()) {
logger.debug("Initializing servlet '" + getServletName() + "'");
}
// Set bean properties from init parameters.
// 對Servlet初始化參數封裝成PropertyValues對象
PropertyValues pvs = new ServletConfigPropertyValues(getServletConfig(), this.requiredProperties);
if (!pvs.isEmpty()) {
try {
//將serlvet封裝為BeanWrapper對象
BeanWrapper bw = PropertyAccessorFactory.forBeanPropertyAccess(this);
// 資源加載器
ResourceLoader resourceLoader = new ServletContextResourceLoader(getServletContext());
// 設置一個屬性編輯器
bw.registerCustomEditor(Resource.class, new ResourceEditor(resourceLoader, getEnvironment()));
// 執行init,(留給子類覆蓋的,dispatcherServlet都沒有覆蓋方法,所以是空的)
initBeanWrapper(bw);
//設置配置
bw.setPropertyValues(pvs, true);
}
catch (BeansException ex) {
if (logger.isErrorEnabled()) {
logger.error("Failed to set bean properties on servlet '" + getServletName() + "'", ex);
}
throw ex;
}
}
// Let subclasses do whatever initialization they like.
// 初始化serlvetBean了
initServletBean();
if (logger.isDebugEnabled()) {
logger.debug("Servlet '" + getServletName() + "' configured successfully");
}
}
initServletBean方法
比較簡單:

initWebApplicationContext方法是主要初始化子容器,跟dispatcherservlet的方法:
protected WebApplicationContext initWebApplicationContext() {
//獲取web.xml配置的spring容器
WebApplicationContext rootContext =
WebApplicationContextUtils.getWebApplicationContext(getServletContext());
WebApplicationContext wac = null;
// web容器,一般開始為空;springboot項目則不為空;
if (this.webApplicationContext != null) {
// A context instance was injected at construction time -> use it
wac = this.webApplicationContext;
if (wac instanceof ConfigurableWebApplicationContext) {
ConfigurableWebApplicationContext cwac = (ConfigurableWebApplicationContext) wac;
if (!cwac.isActive()) {
// The context has not yet been refreshed -> provide services such as
// setting the parent context, setting the application context id, etc
if (cwac.getParent() == null) {
// The context instance was injected without an explicit parent -> set
// the root application context (if any; may be null) as the parent
cwac.setParent(rootContext);
}
configureAndRefreshWebApplicationContext(cwac);
}
}
}
// 為空就查找,查找已經綁定的上下文,一般也是空
if (wac == null) {
// No context instance was injected at construction time -> see if one
// has been registered in the servlet context. If one exists, it is assumed
// that the parent context (if any) has already been set and that the
// user has performed any initialization such as setting the context id
wac = findWebApplicationContext();
}
// 根據父容器,創建web容器,就是子容器,這里面子容器進行了刷新
if (wac == null) {
// No context instance is defined for this servlet -> create a local one
wac = createWebApplicationContext(rootContext);
}
if (!this.refreshEventReceived) {
// Either the context is not a ConfigurableApplicationContext with refresh
// support or the context injected at construction time had already been
// refreshed -> trigger initial onRefresh manually here.
// 刷新上下文,這里主要加載dispatcherservlet的組件
onRefresh(wac);
}
if (this.publishContext) {
// Publish the context as a servlet context attribute.
// 將web容器作為servlet上下文屬性進行發布
String attrName = getServletContextAttributeName();
getServletContext().setAttribute(attrName, wac);
if (this.logger.isDebugEnabled()) {
this.logger.debug("Published WebApplicationContext of servlet '" + getServletName() +
"' as ServletContext attribute with name [" + attrName + "]");
}
}
return wac;
}
createWebApplicationContext就是創建子容器的主要方法:
protected WebApplicationContext createWebApplicationContext(WebApplicationContext parent) {
return createWebApplicationContext((ApplicationContext) parent);
}
protected WebApplicationContext createWebApplicationContext(ApplicationContext parent) {
// 獲取web容器的類型
Class<?> contextClass = getContextClass();
if (this.logger.isDebugEnabled()) {
this.logger.debug("Servlet with name '" + getServletName() +
"' will try to create custom WebApplicationContext context of class '" +
contextClass.getName() + "'" + ", using parent context [" + parent + "]");
}
if (!ConfigurableWebApplicationContext.class.isAssignableFrom(contextClass)) {
throw new ApplicationContextException(
"Fatal initialization error in servlet with name '" + getServletName() +
"': custom WebApplicationContext class [" + contextClass.getName() +
"] is not of type ConfigurableWebApplicationContext");
}
// 反射創建web容器
ConfigurableWebApplicationContext wac =
(ConfigurableWebApplicationContext) BeanUtils.instantiateClass(contextClass);
// 設置環境
wac.setEnvironment(getEnvironment());
// 設置父容器
wac.setParent(parent);
//設置配置文件地址
wac.setConfigLocation(getContextConfigLocation());
// 加載配置,刷新容器
configureAndRefreshWebApplicationContext(wac);
return wac;
}看一下加載配置和刷新容器的地方:
protected void configureAndRefreshWebApplicationContext(ConfigurableWebApplicationContext wac) {
if (ObjectUtils.identityToString(wac).equals(wac.getId())) {
// The application context id is still set to its original default value
// -> assign a more useful id based on available information
if (this.contextId != null) {
wac.setId(this.contextId);
}
else {
// Generate default id...
wac.setId(ConfigurableWebApplicationContext.APPLICATION_CONTEXT_ID_PREFIX +
ObjectUtils.getDisplayString(getServletContext().getContextPath()) + '/' + getServletName());
}
}
// 設置web容器所屬的servletcontext
wac.setServletContext(getServletContext());
// 設置servletconfig
wac.setServletConfig(getServletConfig());
// 設置命名空間
wac.setNamespace(getNamespace());
// 設置監聽器
wac.addApplicationListener(new SourceFilteringListener(wac, new ContextRefreshListener()));
// The wac environment's #initPropertySources will be called in any case when the context
// is refreshed; do it eagerly here to ensure servlet property sources are in place for
// use in any post-processing or initialization that occurs below prior to #refresh
ConfigurableEnvironment env = wac.getEnvironment();
if (env instanceof ConfigurableWebEnvironment) {
// 刷新之前初始化一些屬性資源
((ConfigurableWebEnvironment) env).initPropertySources(getServletContext(), getServletConfig());
}
// web容器的鉤子方法,跟spring容器的BeanPostProcess差不多
postProcessWebApplicationContext(wac);
// 添加一些初始化器,如果沒有設置就沒有
applyInitializers(wac);
// 刷新容器就是走的spring容器刷新
wac.refresh();
}onRefresh刷新dispatcherservlet九大組件的主要地方
onRefresh在frameworkservlet方法里是空的,在dispatcherservlet里重寫了onRefresh方法,我們看dispatcherservlet里面的:
@Override
protected void onRefresh(ApplicationContext context) {
//初始化九大組件
initStrategies(context);
}
protected void initStrategies(ApplicationContext context) {
// 初始化文件上傳解析器
initMultipartResolver(context);
// 本地化解析
initLocaleResolver(context);
// 主題解析器
initThemeResolver(context);
// 處理器映射器 保存Url映射關系
initHandlerMappings(context);
// 處理器適配器
initHandlerAdapters(context);
// 異常解析器
initHandlerExceptionResolvers(context);
// 視圖提取器,從request中獲取viemName
initRequestToViewNameTranslator(context);
// 視圖解析器
initViewResolvers(context);
// 參數解析器
initFlashMapManager(context);
}到此這篇關于SpringMvc中容器加載的過程源碼詳解的文章就介紹到這了,更多相關SpringMvc中容器加載過程內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
Springboot安全框架整合SpringSecurity實現方式
這篇文章主要介紹了Spring全家桶中Springboot安全框架整合SpringSecurity的實現方式,有需要的朋友可以借鑒參考下,希望可以有所幫助2021-09-09
springboot項目數據庫配置類DatabaseConfig示例詳解
這篇文章主要介紹了springboot項目數據庫配置類DatabaseConfig實現代碼,本文通過示例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2023-08-08
Java Scanner類用法及nextLine()產生的換行符問題實例分析
這篇文章主要介紹了Java Scanner類用法及nextLine()產生的換行符問題,結合實例形式分析了Scanner類功能、hasNextInt()和nextInt()方法使用及nextLine()產生的換行符問題解決方法,需要的朋友可以參考下2019-03-03
mybatis collection關聯查詢多個參數方式
在使用MyBatis進行關聯查詢時,往往需要根據多個參數進行查詢,例如,使用evtId和businessType作為查詢條件,同時在resultMap中配置id和businessType1作為結果映射,這種情況下,可以通過<sql>標簽定義參數模板,或者使用@Param注解指定參數名稱2024-10-10
Spring與Shiro整合及加載權限表達式問題
這篇文章主要介紹了Spring與Shiro整合及加載權限表達式問題,本文給大家介紹的非常詳細,具有一定的參考借鑒價值,需要的朋友可以參考下2019-12-12
mybatis中注解與xml配置的對應關系和對比分析
這篇文章主要介紹了mybatis中注解與xml配置的對應關系和對比分析,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-08-08

