快捷導航

FFmpeg中AVIOContext的使用方法詳解

更新時間：2023年08月07日 14:10:17 作者：fengbingchun

AVIOContext是FFMPEG管理輸入輸出數據的結構體，這篇文章主要為大家詳細介紹了這個結構體的具體使用，文中的示例代碼講解詳細，需要的可以參考一下

通過FFmpeg對視頻進行編解碼時，如果輸入文件存在本機或通過USB攝像頭、筆記本內置攝像頭獲取數據時，可通過avformat_open_input接口中的第二個參數直接指定即可。但如果待處理的視頻數據存在于內存塊中時，該如何指定，可通過FFmpeg中的結構體AVIOContext實現，此時avformat_open_input中的第二個參數傳nullptr。

涉及到FFmpeg中的主要函數是avio_alloc_context,聲明如下：

AVIOContext *avio_alloc_context(
                unsigned char *buffer,
                int buffer_size,
                int write_flag,
                void *opaque,
                int (*read_packet)(void *opaque, uint8_t *buf, int buf_size),
                int (*write_packet)(void *opaque, uint8_t *buf, int buf_size),
                int64_t (*seek)(void *opaque, int64_t offset, int whence))

(1).buffer：通過AVIOContext進行輸入/輸出操作的內存塊，由av_malloc分配，av_free釋放。av_read_frame會持續從此處取數據。

(2).buffer_size: 內存塊大小。

(3).write_flag: 如果buffer作為輸出即寫入則為1(FFmpeg將處理后的數據寫入buffer)，如果buffer作為輸入則設置為0(FFmpeg從buffer獲取數據).

(4).opaque: 指向用戶特定數據的不透明指針。

(5).read_packet: 回調函數，當buffer作為輸入時必須指定，否則可為nullptr。此回調函數的參數依次為avio_alloc_context中的opaque、buffer、buffer_size。

(6).write_packet:回調函數，當buffer作為輸出時必須指定，否則可為nullptr。此回調函數的參數依次為avio_alloc_context中的opaque、buffer、buffer_size。

(7).seek：回調函數，用于查找指定字節位置的函數，可為nullptr。

調用完此接口后，需要將此接口返回的指針賦值給AVFormatContext的pb即I/O context。

以下為測試代碼段：

(1).主線程用于實時顯示內存塊內容。另有一個單獨線程用于創建數據。這里使用隊列：線程set_packet持續向隊列中push數據；回調函數read_packet持續從隊列中pop數據

typedef struct Buffer {
    unsigned char* data;
    unsigned int length;
} Buffer;
class BufferQueue {
public:
    BufferQueue() = default;
    ~BufferQueue() {}
    void push(Buffer& buffer) {
        std::unique_lock<std::mutex> lck(mtx);
        queue.push(buffer);
        cv.notify_all();
    }
    void pop(Buffer& buffer) {
        std::unique_lock<std::mutex> lck(mtx);
        while (queue.empty()) {
            cv.wait(lck);
        }
        buffer = queue.front();
        queue.pop();
    }
    unsigned int size() {
        return queue.size();
    }
private:
    std::queue<Buffer> queue;
    std::mutex mtx;
    std::condition_variable cv;
};
class PacketScaleQueue {
public:
    PacketScaleQueue() = default;
    ~PacketScaleQueue() {
        Buffer buffer;
        while (getPacketSize() > 0) {
            popPacket(buffer);
            delete[] buffer.data;
        }
        while (getScaleSize() > 0) {
            popScale(buffer);
            delete[] buffer.data;
        }
    }
    void init(unsigned int buffer_num = 16, unsigned int buffer_size = 1024 * 1024 * 4) {
        for (unsigned int i = 0; i < buffer_num; ++i) {
            Buffer buffer = { new unsigned char[buffer_size], buffer_num};
            pushPacket(buffer);
        }
    }
    void pushPacket(Buffer& buffer) { packet_queue.push(buffer); }
    void popPacket(Buffer& buffer) { packet_queue.pop(buffer); }
    unsigned int getPacketSize() { return packet_queue.size(); }
    void pushScale(Buffer& buffer) { scale_queue.push(buffer); }
    void popScale(Buffer& buffer) { scale_queue.pop(buffer); }
    unsigned int getScaleSize() { return scale_queue.size(); }
private:
    BufferQueue packet_queue, scale_queue;
};

(2).線程函數set_packet內容如下：類PacketScaleQueue中有兩個BufferQueue: packet_queue：未被使用的；scale_queue：已被使用的

void set_packet(PacketScaleQueue& packet_encode)
{
    while (packet_encode_flag) {
        static unsigned char v1 = 0, v2 = 0, v3 = 255;
        static const size_t size = height * width;
        Buffer buffer;
        packet_encode.popPacket(buffer);
        memset(buffer.data, v1, size);
        memset(buffer.data + size, v2, size);
        memset(buffer.data + size * 2, v3, size);
        packet_encode.pushScale(buffer);
        ++v1;
        ++v2;
        --v3;
        if (v1 == 255) v1 = 0;
        if (v2 == 255) v2 = 0;
        if (v3 == 0) v3 = 255;
        std::this_thread::sleep_for(std::chrono::milliseconds(40));
    }
}

(3).回調函數read_packet內容如下：

int read_packet(void* opaque, uint8_t* buf, int buf_size)
{
    PacketScaleQueue* packet_encode = static_cast<PacketScaleQueue*>(opaque);
    Buffer buffer;
    packet_encode->popScale(buffer);
    memcpy(buf, buffer.data, buf_size);
    packet_encode->pushPacket(buffer);
    return buf_size;
}

(4).主函數test_ffmpeg_avio_show內容如下：

int test_ffmpeg_avio_show()
{
    PacketScaleQueue packet_encode;
    packet_encode.init(30, block_size);
    std::thread thread_packet(set_packet, std::ref(packet_encode));
    uint8_t* avio_ctx_buffer = static_cast<uint8_t*>(av_malloc(block_size));
    if (!avio_ctx_buffer) {
        print_error_string(AVERROR(ENOMEM));
        return -1;
    }
    AVIOContext* avio_ctx = avio_alloc_context(avio_ctx_buffer, block_size, 0, &packet_encode, &read_packet, nullptr, nullptr);
    if (!avio_ctx) {
        print_error_string(AVERROR(ENOMEM));
        return -1;
    }
    AVFormatContext* ifmt_ctx = avformat_alloc_context();
    if (!ifmt_ctx) {
        print_error_string(AVERROR(ENOMEM));
        return -1;
    }
    ifmt_ctx->pb = avio_ctx;
    AVDictionary* dict = nullptr;
    av_dict_set(&dict, "video_size", "640x480", 0);
    av_dict_set(&dict, "pixel_format", "bgr24", 0);
    auto ret = avformat_open_input(&ifmt_ctx, nullptr, av_find_input_format("rawvideo"), &dict);
    if (ret < 0) {
        fprintf(stderr, "Could not open input\n");
        print_error_string(ret);
        return ret;
    }
    ret = avformat_find_stream_info(ifmt_ctx, nullptr);
    if (ret < 0) {
        fprintf(stderr, "Could not find stream information\n");
        print_error_string(ret);
        return ret;
    }
    av_dump_format(ifmt_ctx, 0, "nothing", 0);
    int video_stream_index = -1;
    for (unsigned int i = 0; i < ifmt_ctx->nb_streams; ++i) {
        const AVStream* stream = ifmt_ctx->streams[i];
        if (stream->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
            video_stream_index = i;
            fprintf(stdout, "type of the encoded data: %d, dimensions of the video frame in pixels: width: %d, height: %d, pixel format: %d\n",
                stream->codecpar->codec_id, stream->codecpar->width, stream->codecpar->height, stream->codecpar->format);
        }
    }
    if (video_stream_index == -1) {
        fprintf(stderr, "error: no video stream\n");
        return -1;
    }
    AVCodecParameters* codecpar = ifmt_ctx->streams[video_stream_index]->codecpar;
    if (codecpar->codec_id != AV_CODEC_ID_RAWVIDEO) {
        fprintf(stderr, "error: this test code only support rawvideo encode: %d\n", codecpar->codec_id);
        return -1;
    }
    AVPacket* packet = static_cast<AVPacket*>(av_malloc(sizeof(AVPacket)));
    if (!packet) {
        fprintf(stderr, "fail to av_malloc\n");
        return -1;
    }
    cv::Mat mat(height, width, CV_8UC3);
    const char* winname = "show video";
    cv::namedWindow(winname);
    while (1) {
        ret = av_read_frame(ifmt_ctx, packet);
        if (ret >= 0 && packet->stream_index == video_stream_index && packet->size > 0) {
            mat.data = packet->data;
            cv::imshow(winname, mat);
            av_packet_unref(packet);
            int key = cv::waitKey(30);
            if (key == 27) {
                packet_encode_flag = false;
                break;
            }
        }
    }
    av_freep(packet);
    cv::destroyWindow(winname);
    avformat_close_input(&ifmt_ctx);
    // note: the internal buffer could have changed, and be != avio_ctx_buffer
    if (avio_ctx) {
        av_freep(&avio_ctx->buffer);
        av_freep(&avio_ctx);
    }
    //avio_context_free(&avio_ctx); ==> av_freep(&avio_ctx);
    av_dict_free(&dict);
    thread_packet.join();
    fprintf(stdout, "test finish\n");
    return 0;
}

執行結果如下圖所示：