Spring中的InitializingBean和SmartInitializingSingleton的區別詳解
一,InitializingBean簡介
InitializingBean的代碼:
package org.springframework.beans.factory;
/**
* Interface to be implemented by beans that need to react once all their
* properties have been set by a BeanFactory: for example, to perform custom
* initialization, or merely to check that all mandatory properties have been set.
*
* <p>An alternative to implementing InitializingBean is specifying a custom
* init-method, for example in an XML bean definition.
* For a list of all bean lifecycle methods, see the
* {@link BeanFactory BeanFactory javadocs}.
*
* @author Rod Johnson
* @see BeanNameAware
* @see BeanFactoryAware
* @see BeanFactory
* @see org.springframework.beans.factory.support.RootBeanDefinition#getInitMethodName
* @see org.springframework.context.ApplicationContextAware
*/
public interface InitializingBean {
/**
* Invoked by a BeanFactory after it has set all bean properties supplied
* (and satisfied BeanFactoryAware and ApplicationContextAware).
* <p>This method allows the bean instance to perform initialization only
* possible when all bean properties have been set and to throw an
* exception in the event of misconfiguration.
* @throws Exception in the event of misconfiguration (such
* as failure to set an essential property) or if initialization fails.
*/
void afterPropertiesSet() throws Exception;
}說明:
1,InitializingBean只有一個接口方法:afterPropertiesSet()
2,InitializingBean接口可以被bean實現,并重寫afterPropertiesSet()方法。
3,功能:在BeanFactory初始化完這個bean,并且把bean的參數都注入成功后調用一次afterPropertiesSet()方法。
4,InitializingBean有個功能類似的替換方案:在XML配置文件中配置init-method。
二,SmartInitializingSingleton簡介
SmartInitializingSingleton的代碼:
package org.springframework.beans.factory;
/**
* Callback interface triggered at the end of the singleton pre-instantiation phase
* during {@link BeanFactory} bootstrap. This interface can be implemented by
* singleton beans in order to perform some initialization after the regular
* singleton instantiation algorithm, avoiding side effects with accidental early
* initialization (e.g. from {@link ListableBeanFactory#getBeansOfType} calls).
* In that sense, it is an alternative to {@link InitializingBean} which gets
* triggered right at the end of a bean's local construction phase.
*
* <p>This callback variant is somewhat similar to
* {@link org.springframework.context.event.ContextRefreshedEvent} but doesn't
* require an implementation of {@link org.springframework.context.ApplicationListener},
* with no need to filter context references across a context hierarchy etc.
* It also implies a more minimal dependency on just the {@code beans} package
* and is being honored by standalone {@link ListableBeanFactory} implementations,
* not just in an {@link org.springframework.context.ApplicationContext} environment.
*
* <p><b>NOTE:</b> If you intend to start/manage asynchronous tasks, preferably
* implement {@link org.springframework.context.Lifecycle} instead which offers
* a richer model for runtime management and allows for phased startup/shutdown.
*
* @author Juergen Hoeller
* @since 4.1
* @see org.springframework.beans.factory.config.ConfigurableListableBeanFactory#preInstantiateSingletons()
*/
public interface SmartInitializingSingleton {
/**
* Invoked right at the end of the singleton pre-instantiation phase,
* with a guarantee that all regular singleton beans have been created
* already. {@link ListableBeanFactory#getBeansOfType} calls within
* this method won't trigger accidental side effects during bootstrap.
* <p><b>NOTE:</b> This callback won't be triggered for singleton beans
* lazily initialized on demand after {@link BeanFactory} bootstrap,
* and not for any other bean scope either. Carefully use it for beans
* with the intended bootstrap semantics only.
*/
void afterSingletonsInstantiated();
}說明:
1,SmartInitializingSingleton中只有一個接口方法:afterSingletonsInstantiated()
2,從注釋中可以看到,SmartInitializingSingleton接口可以被單例的bean實現,并重寫afterSingletonsInstantiated()方法。
3,bean的afterSingletonsInstantiated()方法是在所有單例bean都初始化完成后才會調用的。
4,此接口可以解決一些因?yàn)閎ean初始化太早而出現的錯誤和問題。
5,此接口是從Spring4.1版本開始使用的。
6,此接口可以作為InitializingBean接口的一種替代方案。
三,InitializingBean和SmartInitializingSingleton的區別
1,SmartInitializingSingleton只作用于單例bean,InitializingBean無此要求。但他們都不能用于懶加載的bean。
2,SmartInitializingSingleton是在所有單例Bean都初始化完成后調用的,InitializingBean是每個bean初始化完成后就會調用。
四,從源碼觀察InitializingBean和SmartInitializingSingleton調用時機的區別
在Spring進行依賴注入的過程中,代碼會來到DefaultListableBeanFactory類的preInstantiateSingletons()方法:
@Override
public void preInstantiateSingletons() throws BeansException {
if (this.logger.isDebugEnabled()) {
this.logger.debug("Pre-instantiating singletons in " + this);
}
// Iterate over a copy to allow for init methods which in turn register new bean definitions.
// While this may not be part of the regular factory bootstrap, it does otherwise work fine.
List<String> beanNames = new ArrayList<>(this.beanDefinitionNames);
// Trigger initialization of all non-lazy singleton beans...
for (String beanName : beanNames) {
RootBeanDefinition bd = getMergedLocalBeanDefinition(beanName);
if (!bd.isAbstract() && bd.isSingleton() && !bd.isLazyInit()) {
if (isFactoryBean(beanName)) {
Object bean = getBean(FACTORY_BEAN_PREFIX + beanName);
if (bean instanceof FactoryBean) {
final FactoryBean<?> factory = (FactoryBean<?>) bean;
boolean isEagerInit;
if (System.getSecurityManager() != null && factory instanceof SmartFactoryBean) {
isEagerInit = AccessController.doPrivileged((PrivilegedAction<Boolean>)
((SmartFactoryBean<?>) factory)::isEagerInit,
getAccessControlContext());
}
else {
isEagerInit = (factory instanceof SmartFactoryBean &&
((SmartFactoryBean<?>) factory).isEagerInit());
}
if (isEagerInit) {
getBean(beanName);
}
}
}
else {
getBean(beanName);
}
}
}
// Trigger post-initialization callback for all applicable beans...
for (String beanName : beanNames) {
Object singletonInstance = getSingleton(beanName);
if (singletonInstance instanceof SmartInitializingSingleton) {
final SmartInitializingSingleton smartSingleton = (SmartInitializingSingleton) singletonInstance;
if (System.getSecurityManager() != null) {
AccessController.doPrivileged((PrivilegedAction<Object>) () -> {
smartSingleton.afterSingletonsInstantiated();
return null;
}, getAccessControlContext());
}
else {
smartSingleton.afterSingletonsInstantiated();
}
}
}
}方法很明確的分成了兩部分。
第一部分是從beanDefinitionNames列表中獲得所有要注入的bean,然后調用getBean()方法完成對bean的注入,InitializingBean. afterPropertiesSet()就是在getBean()方法中調用的。
第二部分再一次從beanDefinitionNames列表中獲得所有要注入的bean,并且調用他們的SmartInitializingSingleton. afterSingletonsInstantiated()方法。
以上就是這兩個接口生效位置的不同。
下面還可以看一下具體調用InitializingBean. afterPropertiesSet()方法的代碼,在上面第一部分調用getBean()方法的代碼中,經過多層調用,代碼會來到AbstractAutowireCapableBeanFactory的invokeInitMethods()方法:
protected void invokeInitMethods(String beanName, final Object bean, @Nullable RootBeanDefinition mbd)
throws Throwable {
boolean isInitializingBean = (bean instanceof InitializingBean);
if (isInitializingBean && (mbd == null || !mbd.isExternallyManagedInitMethod("afterPropertiesSet"))) {
if (logger.isDebugEnabled()) {
logger.debug("Invoking afterPropertiesSet() on bean with name '" + beanName + "'");
}
if (System.getSecurityManager() != null) {
try {
AccessController.doPrivileged((PrivilegedExceptionAction<Object>) () -> {
((InitializingBean) bean).afterPropertiesSet();
return null;
}, getAccessControlContext());
}
catch (PrivilegedActionException pae) {
throw pae.getException();
}
}
else {
((InitializingBean) bean).afterPropertiesSet();
}
}
if (mbd != null && bean.getClass() != NullBean.class) {
String initMethodName = mbd.getInitMethodName();
if (StringUtils.hasLength(initMethodName) &&
!(isInitializingBean && "afterPropertiesSet".equals(initMethodName)) &&
!mbd.isExternallyManagedInitMethod(initMethodName)) {
invokeCustomInitMethod(beanName, bean, mbd);
}
}
}這個方法的代碼也是分成了明顯的兩部分,第一部分代碼就是調用bean的afterPropertiesSet()方法,第二部分調用了bean的initMethod,這個initMethod是可以在配置文件中配置的。
通過這個方法可以看到,afterPropertiesSet()方法是在initMethod之前調用的,而且看起來如果afterPropertiesSet()方法如果拋出了異常,那么initMethod方法也不會調用了(沒有安全管理器的話)。
到此這篇關于Spring中的InitializingBean和SmartInitializingSingleton的區別詳解的文章就介紹到這了,更多相關InitializingBean和SmartInitializingSingleton區別內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
MySql設置指定用戶數據庫查看查詢權限
這篇文章主要介紹了MySql設置指定用戶數據庫查看查詢權限,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-10-10
ubuntu?22.04安裝mysql?8.0步驟與避坑指南
MySQL最流行的關系型數據庫管理系統,在WEB應用方面MySQL是最好的關系數據庫管理系統應用軟件之一,這篇文章主要給大家介紹了關于ubuntu?22.04安裝mysql?8.0步驟與避坑指南的相關資料,需要的朋友可以參考下2023-12-12
MySQL如何設置動態創建時間(create_time)和修改時間(update_time)
本文主要介紹了MySQL如何設置動態創建時間(create_time)和修改時間(update_time),文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2023-05-05
MySQL 隨機函數獲取數據速度和效率分析
最近做項目,需要做一個從mysql數據庫中隨機取幾條數據出來。總所周知,order by rand 會死人的。。因?yàn)楸救藢?duì)大數據量方面的只是了解的很少,無解,去找百度老師。。搜索結果千篇一律。特發到這里來,供大家學習,需要的朋友可以參考下2016-11-11
如何使用mysql查詢24小時數據
在進行實時數據處理時,我們常常需要查詢最近24小時的數據來進行分析和處理,下面我們將介紹如何使用MySQL查詢最近24小時的數據,需要的朋友可以參考下2023-07-07

