wget 'https://github.com/alibaba/RedisShake/releases/download/v3.1.7/redis-shake-linux-amd64.tar.gz'

mkdir redis-shake
tar zxvf redis-shake-linux-amd64.tar.gz -C redis-shake

type = "sync"
[source]
version = 2.8 # redis version, such as 2.8, 4.0, 5.0, 6.0, 6.2, 7.0, ...
address = "x.x.x.x:6379"
username = "" # keep empty if not using ACL
password = "xxxxxxx" # keep empty if no authentication is required
tls = false
elasticache_psync = "" # using when source is ElastiCache. ref: https://github.com/alibaba/RedisShake/issues/373
[target]
type = "standalone" # "standalone" or "cluster"
version = 2.8 # redis version, such as 2.8, 4.0, 5.0, 6.0, 6.2, 7.0, ...
 # When the target is a cluster, write the address of one of the nodes.
 # redis-shake will obtain other nodes through the `cluster nodes` command.
address = "x.x.x.x:6379"
username = "" # keep empty if not using ACL
password = "xxxxxxx" # keep empty if no authentication is required
tls = false
[advanced]
dir = "data"
ncpu = 4 # runtime.GOMAXPROCS, 0 means use runtime.NumCPU() cpu cores
pprof_port = 0 # pprof port, 0 means disable
metrics_port = 0 # metric port, 0 means disable
log_file = "redis-shake.log"
log_level = "info" # debug, info or warn
log_interval = 5 # in seconds
rdb_restore_command_behavior = "skip" # panic, rewrite or skip
pipeline_count_limit = 1024 # pipeline
target_redis_client_max_querybuf_len = 1024_000_000
target_redis_proto_max_bulk_len = 512_000_000

./redis-shake sync.toml

wget 'http://docs-aliyun.cn-hangzhou.oss.aliyun-inc.com/assets/attach/120287/cn_zh/1608173646665/redis-shake-v2.0.3.tar.gz'

tar xzf redis-shake-v2.0.3.tar.gz

conf.version = 1   #當前配置文件版本號，請不要修改
id = redis-shake
log.file =         #指定日志文件，不指定將打印到stdout
log.level = info
pid_path =         #指定pid路徑，不指定默認/var/run
system_profile = 9310
http_profile = 9320 # metric端口號 -1表示不啟用
parallel = 32       #啟動多少個并發線程同步一個RDB文件，默認32
source.type = sentinel #支持standalone，sentinel，cluster和proxy四種模式
source.address = sourcemaster:master@x.x.x.x:26379
source.password_raw = XXXXXXXXXXXXXXXXXXX
source.auth_type = auth
source.tls_enable = false
source.rdb.input = local
source.rdb.parallel = 0
source.rdb.special_cloud =
target.type = sentinel
target.address = targetmaster:master@x.x.x.x:26379
target.password_raw = XXXXXXXXXXXXXXXXXXX
target.auth_type = auth
target.db = -1
target.tls_enable = false
target.rdb.output = local_dump
target.version = 2.8   #目標redis版本
fake_time =            #處理過期的鍵值，當遷移兩端不一致，目的端需要加上這個值
key_exists = ignore    #當源目的有重復的key，支持rewrite（覆蓋目的端key）、none（進程直接退出）、ignore（保留目的端key,忽略源端key）
filter.db.whitelist = 5;9 #指定通過的db 該配置db5、db9通過其他忽略
filter.db.blacklist =     #指定過濾的db
filter.key.whitelist =    #指定特定前綴的key通過
filter.key.blacklist =    #指定特定前綴的key過濾
filter.slot =
filter.lua = false
big_key_threshold = 524288000 #key不大直接調用restore寫入目的端，如果key對應的value字節超過定制那么分批次一個一個寫入，如果目的端是Codis 該參數需要置1，目的端大版本小于源端，建議置1.
metric = true
metric.print_log = false
sender.size = 104857600 #發送緩存的字節長度，超過這個閾值將會強行刷緩存發送
sender.count = 4095   #發送緩存的報文個數，超過這個閾值將會強行刷緩存發送
sender.delay_channel_size = 65535 # 用于metric統計時延的隊列
keep_alive = 0    # TCP keep-alive?；顓?shù)，單位秒，0表示不啟用。
scan.key_number = 50  # 每次scan的個數，不配置則默認100.
scan.special_cloud = #有些版本具有特殊格式目前支持騰訊云的集群版"tencent_cluster"、阿里云的集群版"aliyun_cluster"，主從版本不需要,只針對集群版。
scan.key_file = #有些云版本，不支持sync/psync，也不支持scan，我們支持從文件中進行讀取所有key列表并進行抓?。阂恍幸粋€(gè)key。
qps = 200000 #每秒傳輸key的個數
resume_from_break_point = false #斷點續傳
replace_hash_tag = false

 ./redis-shake.linux -type=sync -conf=redis-shake.conf