nginx+tomcat實現負載均衡，使用redis session共享
更新時間：2016年12月02日 08:33:31 作者：程序人生0407
這篇文章主要介紹了nginx tomcat負載均衡 使用redis session共享,有興趣的同學可以了解一下。
環境準備
1、準備一臺nginx服務器 ip192.168.1.133 端口81
安裝過程：
＃首先安裝依賴： yum -y install gcc-c++ yum -y install pcre pcre-devel yum -y install zlib zlib-devel yum -y install openssl openssl—devel #注意 ： 安裝nginx必須使用 root 用戶安裝 #創建一個nginx目錄 mkdir /usr/local/src/nginx #進入到nginx目錄 cd /usr/local/src/nginx #下載或上傳安裝包 wget http://nginx.org/download/nginx.tar.gz 或 rz上傳 #解壓安裝包 tar -xvf nginx.tar.gz #進入到解壓后的目錄 cd nginx # 下面 才開始正式安裝 #把nginx安裝到指定用戶的目錄 mkdir -p /ucenter/soft/nginx #安裝配置 prefix為安裝目錄 user為用戶 group為 組 ./configure --prefix=/ucenter/soft/nginx --user=ucenter --group=ucenter #編譯 make #安裝 make install #在linux系統中由于非root用戶不能占用80端口，所以需要使普通用戶以root身份啟動nginx。 cd /ucenter/soft/nginx/sbin #把soft文件下所有的文件所屬者修改為ucener -R 表示遞歸 chown ucenter:ucenter ./soft/ -R #修改 ./nginx 的所屬為root chown root nginx #讓普通用戶可以使用80端口，可以使用root權限啟用nginx chmod u+s nginx #修改配置文件 在修改配置文件之前 ，要備份該文件 cd conf/ # 要注意nginx 的工作進程，一般根據cpu的核數去修改 vim nginx.conf #關閉防火墻，打開80端口 service iptables stop #啟動nginx ./nginx #重啟nginx ./nginx -s reload #關閉nginx ./nginx -s stop
準備一臺tomcat服務器，先準備java環境，安裝jdk步驟省略
然后分別安裝3個tomcat 服務器ip地址：192.168.1.143，tomcat1 8080端口，tomcat2 8081端口，tomcat3 8082端口。
apache-tomcat-7.0.64/conf/server.xml配置文件修改這三個地方，這樣端口就不會沖突
<Server port="8005" shutdown="SHUTDOWN"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
修改tomcat ROOT目錄下index.jsp，分別增加每個tomcat的標識，以及在頁面上顯示session ID
<%--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
--%>
<!DOCTYPE html>
<%@ page session="true" %>
<%
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy");
request.setAttribute("year", sdf.format(new java.util.Date()));
request.setAttribute("tomcatUrl", "http://tomcat.apache.org/");
request.setAttribute("tomcatDocUrl", "/docs/");
request.setAttribute("tomcatExamplesUrl", "/examples/");
%>
<html lang="en">
<head>
<title><%=request.getServletContext().getServerInfo() %></title>
<link href="favicon.ico" rel="icon" type="image/x-icon" />
<link href="favicon.ico" rel="shortcut icon" type="image/x-icon" />
<link href="tomcat.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<div id="navigation" class="curved container">
<span id="nav-home"><a href="${tomcatUrl}">Home--<%=request.getSession().getId() %></a></span>
<span id="nav-hosts"><a href="${tomcatDocUrl}">Documentation</a></span>
<span id="nav-config"><a href="${tomcatDocUrl}config/">Configuration</a></span>
<span id="nav-examples"><a href="${tomcatExamplesUrl}">Examples</a></span>
<span id="nav-wiki"><a >Wiki</a></span>
<span id="nav-lists"><a href="${tomcatUrl}lists.html">Mailing Lists</a></span>
<span id="nav-help"><a href="${tomcatUrl}findhelp.html">Find Help</a></span>
<br class="separator" />
</div>
<div id="asf-box">
<h1>${pageContext.servletContext.serverInfo}--8080</h1>
</div>
<div id="upper" class="curved container">
<div id="congrats" class="curved container">
<h2>If you're seeing this, you've successfully installed Tomcat. Congratulations!</h2>
</div>
<div id="notice">
<img src="tomcat.png" alt="[tomcat logo]" />
<div id="tasks">
<h3>Recommended Reading:</h3>
<h4><a href="${tomcatDocUrl}security-howto.html">Security Considerations HOW-TO</a></h4>
<h4><a href="${tomcatDocUrl}manager-howto.html">Manager Application HOW-TO</a></h4>
<h4><a href="${tomcatDocUrl}cluster-howto.html">Clustering/Session Replication HOW-TO</a></h4>
</div>
</div>
<div id="actions">
<div class="button">
<a class="container shadow" href="/manager/status"><span>Server Status</span></a>
</div>
<div class="button">
<a class="container shadow" href="/manager/html"><span>Manager App</span></a>
</div>
<div class="button">
<a class="container shadow" href="/host-manager/html"><span>Host Manager</span></a>
</div>
</div>
<!--
<br class="separator" />
-->
<br class="separator" />
</div>
<div id="middle" class="curved container">
<h3>Developer Quick Start</h3>
<div class="col25">
<div class="container">
<p><a href="${tomcatDocUrl}setup.html">Tomcat Setup</a></p>
<p><a href="${tomcatDocUrl}appdev/">First Web Application</a></p>
</div>
</div>
<div class="col25">
<div class="container">
<p><a href="${tomcatDocUrl}realm-howto.html">Realms & AAA</a></p>
<p><a href="${tomcatDocUrl}jndi-datasource-examples-howto.html">JDBC DataSources</a></p>
</div>
</div>
<div class="col25">
<div class="container">
<p><a href="${tomcatExamplesUrl}">Examples</a></p>
</div>
</div>
<div class="col25">
<div class="container">
<p><a >Servlet Specifications</a></p>
<p><a >Tomcat Versions</a></p>
</div>
</div>
<br class="separator" />
</div>
<div id="lower">
<div id="low-manage" class="">
<div class="curved container">
<h3>Managing Tomcat</h3>
<p>For security, access to the <a href="/manager/html">manager webapp</a> is restricted.
Users are defined in:</p>
<pre>$CATALINA_HOME/conf/tomcat-users.xml</pre>
<p>In Tomcat 7.0 access to the manager application is split between
different users. <a href="${tomcatDocUrl}manager-howto.html">Read more...</a></p>
<br />
<h4><a href="${tomcatDocUrl}RELEASE-NOTES.txt">Release Notes</a></h4>
<h4><a href="${tomcatDocUrl}changelog.html">Changelog</a></h4>
<h4><a href="${tomcatUrl}migration.html">Migration Guide</a></h4>
<h4><a href="${tomcatUrl}security.html">Security Notices</a></h4>
</div>
</div>
<div id="low-docs" class="">
<div class="curved container">
<h3>Documentation</h3>
<h4><a href="${tomcatDocUrl}">Tomcat 7.0 Documentation</a></h4>
<h4><a href="${tomcatDocUrl}config/">Tomcat 7.0 Configuration</a></h4>
<h4><a >Tomcat Wiki</a></h4>
<p>Find additional important configuration information in:</p>
<pre>$CATALINA_HOME/RUNNING.txt</pre>
<p>Developers may be interested in:</p>
<ul>
<li><a >Tomcat 7.0 Bug Database</a></li>
<li><a href="${tomcatDocUrl}api/index.html">Tomcat 7.0 JavaDocs</a></li>
<li><a >Tomcat 7.0 SVN Repository</a></li>
</ul>
</div>
</div>
<div id="low-help" class="">
<div class="curved container">
<h3>Getting Help</h3>
<h4><a href="${tomcatUrl}faq/">FAQ</a> and <a href="${tomcatUrl}lists.html">Mailing Lists</a></h4>
<p>The following mailing lists are available:</p>
<ul>
<li id="list-announce"><strong><a href="${tomcatUrl}lists.html#tomcat-announce">tomcat-announce</a><br />
Important announcements, releases, security vulnerability notifications. (Low volume).</strong>
</li>
<li><a href="${tomcatUrl}lists.html#tomcat-users">tomcat-users</a><br />
User support and discussion
</li>
<li><a href="${tomcatUrl}lists.html#taglibs-user">taglibs-user</a><br />
User support and discussion for <a href="${tomcatUrl}taglibs/">Apache Taglibs</a>
</li>
<li><a href="${tomcatUrl}lists.html#tomcat-dev">tomcat-dev</a><br />
Development mailing list, including commit messages
</li>
</ul>
</div>
</div>
<br class="separator" />
</div>
<div id="footer" class="curved container">
<div class="col20">
<div class="container">
<h4>Other Downloads</h4>
<ul>
<li><a href="${tomcatUrl}download-connectors.cgi">Tomcat Connectors</a></li>
<li><a href="${tomcatUrl}download-native.cgi">Tomcat Native</a></li>
<li><a href="${tomcatUrl}taglibs/">Taglibs</a></li>
<li><a href="${tomcatDocUrl}deployer-howto.html">Deployer</a></li>
</ul>
</div>
</div>
<div class="col20">
<div class="container">
<h4>Other Documentation</h4>
<ul>
<li><a href="${tomcatUrl}connectors-doc/">Tomcat Connectors</a></li>
<li><a href="${tomcatUrl}connectors-doc/">mod_jk Documentation</a></li>
<li><a href="${tomcatUrl}native-doc/">Tomcat Native</a></li>
<li><a href="${tomcatDocUrl}deployer-howto.html">Deployer</a></li>
</ul>
</div>
</div>
<div class="col20">
<div class="container">
<h4>Get Involved</h4>
<ul>
<li><a href="${tomcatUrl}getinvolved.html">Overview</a></li>
<li><a href="${tomcatUrl}svn.html">SVN Repositories</a></li>
<li><a href="${tomcatUrl}lists.html">Mailing Lists</a></li>
<li><a >Wiki</a></li>
</ul>
</div>
</div>
<div class="col20">
<div class="container">
<h4>Miscellaneous</h4>
<ul>
<li><a href="${tomcatUrl}contact.html">Contact</a></li>
<li><a href="${tomcatUrl}legal.html">Legal</a></li>
<li><a >Sponsorship</a></li>
<li><a >Thanks</a></li>
</ul>
</div>
</div>
<div class="col20">
<div class="container">
<h4>Apache Software Foundation</h4>
<ul>
<li><a href="${tomcatUrl}whoweare.html">Who We Are</a></li>
<li><a href="${tomcatUrl}heritage.html">Heritage</a></li>
<li><a >Apache Home</a></li>
<li><a href="${tomcatUrl}resources.html">Resources</a></li>
</ul>
</div>
</div>
<br class="separator" />
</div>
<p class="copyright">Copyright ©1999-${year} Apache Software Foundation. All Rights Reserved</p>
</div>
</body>
</html>
這時候 修改nginx配置文件nginx.conf，把三臺tomcat的ip地址以及端口號加入進去，使用nginx做代理
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
upstream localhost1 {
#ip_hash;
server 192.168.1.143:8080;
server 192.168.1.143:8081;
server 192.168.1.143:8082;
}
server {
listen 81;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
proxy_connect_timeout 3;
proxy_send_timeout 30;
proxy_read_timeout 30;
proxy_pass http://localhost1;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443;
# server_name localhost;
# ssl on;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_timeout 5m;
# ssl_protocols SSLv2 SSLv3 TLSv1;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
這時候，分別啟動三臺tomcat以及nginx，訪問http://192.168.1.133:81，這時候每次刷新頁面，都會隨機訪問8080或者8081或者8082，而且頁面上出現的session id也都是不一樣的，我們應該如何讓這三臺tomcat共享session呢，我們使用redis來做。
這時候，在已經按照三臺tomcat的服務器192.168.1.143上，安裝redis，安裝步驟如下：
$ wget http://download.redis.io/releases/redis-3.2.3.tar.gz $ tar xzf redis-3.2.3.tar.gz $ cd redis-3.2.3 $ make MALLOC=libc #啟動redis src前面是安裝的路徑 $ src/redis-server & #關閉redis src/redis-cli shutdown #使用redis 放入鍵值對 key value $ src/redis-cli 127.0.0.1:6379> set foo bar OK 127.0.0.1:6379> get foo "bar" $
安裝完redis之后，在三個tomcat的lib文件夾內分別上傳這五個所依賴的jar，分別是
commons-pool2-2.0.jar
jedis-2.5.2.jar
tomcat-redis-session-manager1.2.jar
tomcat-juli.jar
tomcat-juli-adapters.jar
所有jar在這里了，下載地址
然后分別修個三個tomcat的context.xml文件，增加如下的配置
<?xml version='1.0' encoding='utf-8'?> <Context> <!-- Default set of monitored resources --> <WatchedResource>WEB-INF/web.xml</WatchedResource> <!-- 這里增加redis session共享的配置 6379是redis的端口--> <Valve className="com.orangefunction.tomcat.redissessions.RedisSessionHandlerValve" /> <Manager className="com.orangefunction.tomcat.redissessions.RedisSessionManager" host="127.0.0.1" port="6379" database="0" maxInactiveInterval="60" /> </Context>
這時候，分別重啟三個tomcat以及nginx，查看tomcat日志之后，發現沒有任何異常報錯，說明我們成功了，接下來開始測試。
我們訪問nginx服務器地址：http://192.168.1.133:81/
得到的是8080端口的 tomcat1 ，session id為1A0625767F27BA95EF4D5F061FE0568D
這時候按F5刷新頁面，得到的是8081端口的 tomcat2 ，session id依舊是 1A0625767F27BA95EF4D5F061FE0568D
再次刷新頁面，得到的是8082端口的 tomcat3，session id依舊是 1A0625767F27BA95EF4D5F061FE0568D。 、
這時候，說明我們搭建tomcat + nginx負載均衡 + redis session同步成功啦！
nginx幫助把我們的請求均勻的分發給三個tomcat --》tomcat1 、tomcat2以及tomcat3
redis幫助我們同步session，這樣一來，我們的服務器性能就會提高許多，任何一臺tomcat發生故障后，對整體的服務都不會有影響了。
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
本篇文章主要介紹了升級nginx以支持http2的方法，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2018-03-03
504?Gateway?Timeout網關超時的根源及完美解決方法
在日常開發和運維過程中,504?Gateway?Timeout?錯誤是常見的網絡問題之一,尤其是在使用反向代理（如?Nginx）或負載均衡時,遇到這種錯誤會導致網站無法訪問,嚴重影響用戶體驗,這篇文章主要介紹了504?Gateway?Timeout網關超時完美解決方法,需要的朋友可以參考下2025-08-08
Linux系統下nginx日志每天定時切割的腳本寫法
本篇文章給大家分享使用Linux系統自帶的命令logrotate對Nginx日志進行切割的方法，對nginx日志切割腳本感興趣的朋友一起學習吧2016-11-11
詳解Prometheus 抓取 nginx 訪問日志的指標
通過結合NGINX Exporter, Fluentd, Prometheus和Grafana, 可有效監控并可視化NGINX中的4xx和5xx狀態碼日志,首先使用Fluentd收集和解析NGINX日志,再通過Prometheus抓取Fluentd暴露的指標,本文介紹Prometheus抓取nginx訪問日志的指標,感興趣的朋友一起看看吧2024-10-10
nginx快速部署一個網站服務(多域名+多端口)
本文主要介紹了nginx快速部署一個網站服務，并實現多域名和多端口，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-10-10
Nginx反向代理之proxy_redirect指令的實現
proxy_redirect指令是用來重置頭信息中的"Location"和"Refresh"的值,本文就來詳細的介紹一下如何使用,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-08-08
Nginx的緩存機制通過存儲響應數據來加速頁面響應,減少重復處理,合適的緩存清理策略（基于時間、空間、請求等）可以釋放磁盤空間,確保緩存數據的時效性,防止緩存穿透和數據過時等問題,結合Nginx的內置緩存機制與外部工具,可以更靈活地控制緩存清理的過程2025-12-12
Nginx禁止國外IP訪問我的網站的實現
本文主要介紹了Nginx禁止國外IP訪問我的網站的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-07-07
這篇文章主要介紹了nacos集群搭建Nginx負載均衡的詳細操作,文中通過代碼示例和圖文介紹的非常詳細,對大家的學習或工作有一定的幫助,需要的朋友可以參考下2024-01-01
Nginx配置編寫時支持邏輯運算與大小寫字母轉換的方法
這篇文章主要介紹了Nginx配置編寫時支持邏輯運算與大小寫字母轉換的方法,其中大小寫字母轉換是以lower upper case模塊來實現,需要的朋友可以參考下2016-01-01