快捷導航

Android自定義View實現QQ音樂中圓形旋轉碟子

更新時間：2021年09月23日 09:39:47 作者：Hensen_

這篇文章主要為大家詳細介紹了Android自定義View實現QQ音樂中圓形旋轉碟子，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下

QQ音樂中圓形旋轉碟子的具體實現代碼，供大家參考，具體內容如下

思路分析：

1、在onMeasure中測量整個View的寬和高后，設置寬高
2、獲取我們r(jià)es的圖片資源后，在ondraw方法中進行繪制圓形圖片
3、通過Handler發送Runnable來啟動旋轉線程（如果只想做圓形頭像的話，這步可以去掉）
4、在布局中使用我們的View

效果圖：

貼出我們的變量信息：

//view的寬和高 
int mHeight = 0; 
int mWidth = 0; 
//圓形圖片 
Bitmap bitmap = null; 
//圓形圖片的真實半徑 
int radius = 0; 
//旋轉動畫的矩形 
Matrix matrix = new Matrix(); 
//旋轉動畫的角度 
int degrees = 0;

步驟一：測量整個View的寬和高后，設置寬高

@Override 
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { 
 super.onMeasure(widthMeasureSpec, heightMeasureSpec); 
 //測量整個View的寬和高 
 mWidth = measuredWidth(widthMeasureSpec); 
 mHeight= measuredHeight(heightMeasureSpec); 
 setMeasuredDimension(mWidth, mHeight); 
} 
 
private int measuredWidth(int widthMeasureSpec) { 
 int Mode = MeasureSpec.getMode(widthMeasureSpec); 
 int Size = MeasureSpec.getSize(widthMeasureSpec); 
 if (Mode == MeasureSpec.EXACTLY) { 
  mWidth = Size; 
 } else { 
  //由圖片決定寬度 
  int value = getPaddingLeft() + getPaddingRight() + bitmap.getWidth(); 
  if (Mode == MeasureSpec.AT_MOST) { 
   //由圖片和Padding決定寬度，但是不能超過View的寬 
   mWidth = Math.min(value, Size); 
  } 
 } 
 return mWidth; 
} 
 
private int measuredHeight(int heightMeasureSpec) { 
 int Mode = MeasureSpec.getMode(heightMeasureSpec); 
 int Size = MeasureSpec.getSize(heightMeasureSpec); 
 if (Mode == MeasureSpec.EXACTLY) { 
  mHeight = Size; 
 } else { 
  //由圖片決定高度 
  int value = getPaddingTop() + getPaddingBottom() + bitmap.getHeight(); 
  if (Mode == MeasureSpec.AT_MOST) { 
   //由圖片和Padding決定高度，但是不能超過View的高 
   mHeight = Math.min(value, Size); 
  } 
 } 
 return mHeight; 
}

步驟二：獲取我們r(jià)es的圖片資源后，在ondraw方法中進行繪制圓形圖片

//獲取res的圖片資源 
bitmap = BitmapFactory.decodeResource(getResources(), R.drawable.icon); 
@Override 
protected void onDraw(Canvas canvas) { 
 super.onDraw(canvas); 
 canvas.concat(matrix); 
 //真實的半徑必須是View的寬高最小值 
 radius = Math.min(mWidth, mHeight); 
 //如果圖片本身寬高太大，進行相應的縮放 
 bitmap = Bitmap.createScaledBitmap(bitmap, radius, radius, false); 
 //畫圓形圖片 
 canvas.drawBitmap(createCircleImage(bitmap, radius), 0, 0, null); 
 matrix.reset(); 
} 
 
private Bitmap createCircleImage(Bitmap source, int radius) { 
 Paint paint = new Paint(); 
 paint.setAntiAlias(true); 
 Bitmap target = Bitmap.createBitmap(radius, radius, Bitmap.Config.ARGB_8888); 
 //產生一個同樣大小的畫布 
 Canvas canvas = new Canvas(target); 
 //首先繪制圓形 
 canvas.drawCircle(radius / 2, radius / 2, radius / 2, paint); 
 //使用SRC_IN模式顯示后畫圖的交集處 
 paint.setXfermode(new PorterDuffXfermode(PorterDuff.Mode.SRC_IN)); 
 //繪制圖片，從（0，0）畫 
 canvas.drawBitmap(source, 0, 0, paint); 
 return target; 
}

步驟三：通過Handler發送Runnable來啟動旋轉線程

//開始旋轉 
mHandler.post(runnable); 
[java] view plain copy 在CODE上查看代碼片派生到我的代碼片
//-----------旋轉動畫----------- 
Handler mHandler = new Handler(); 
Runnable runnable = new Runnable() { 
 @Override 
 public void run() { 
  matrix.postRotate(degrees++, radius / 2, radius / 2); 
  //重繪 
  invalidate(); 
  mHandler.postDelayed(runnable, 50); 
 } 
};

步驟四：在布局中使用我們的View

<com.handsome.cycle.MyCycleView 
 android:layout_width="wrap_content" 
 android:layout_height="wrap_content" />

下面是整個類的源碼

public class MyCycleView extends View { 
 
 //view的寬和高 
 int mHeight = 0; 
 int mWidth = 0; 
 //圓形圖片 
 Bitmap bitmap = null; 
 //圓形圖片的真實半徑 
 int radius = 0; 
 //旋轉動畫的矩形 
 Matrix matrix = new Matrix(); 
 //旋轉動畫的角度 
 int degrees = 0; 
 
 //-----------旋轉動畫----------- 
 Handler mHandler = new Handler(); 
 Runnable runnable = new Runnable() { 
  @Override 
  public void run() { 
   matrix.postRotate(degrees++, radius / 2, radius / 2); 
   //重繪 
   invalidate(); 
   mHandler.postDelayed(runnable, 50); 
  } 
 }; 
 
 public MyCycleView(Context context) { 
  super(context); 
  initView(); 
 } 
 
 public MyCycleView(Context context, AttributeSet attrs) { 
  super(context, attrs); 
  initView(); 
 } 
 
 public MyCycleView(Context context, AttributeSet attrs, int defStyleAttr) { 
  super(context, attrs, defStyleAttr); 
  initView(); 
 } 
 
 public void initView() { 
  //獲取res的圖片資源 
  bitmap = BitmapFactory.decodeResource(getResources(), R.drawable.icon); 
  //開始旋轉 
  mHandler.post(runnable); 
 } 
 
 @Override 
 protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { 
  super.onMeasure(widthMeasureSpec, heightMeasureSpec); 
  //測量整個View的寬和高 
  mWidth = measuredWidth(widthMeasureSpec); 
  mHeight = measuredHeight(heightMeasureSpec); 
  setMeasuredDimension(mWidth, mHeight); 
 } 
 
 private int measuredWidth(int widthMeasureSpec) { 
  int Mode = MeasureSpec.getMode(widthMeasureSpec); 
  int Size = MeasureSpec.getSize(widthMeasureSpec); 
  if (Mode == MeasureSpec.EXACTLY) { 
   mWidth = Size; 
  } else { 
   //由圖片決定寬度 
   int value = getPaddingLeft() + getPaddingRight() + bitmap.getWidth(); 
   if (Mode == MeasureSpec.AT_MOST) { 
    //由圖片和Padding決定寬度，但是不能超過View的寬 
    mWidth = Math.min(value, Size); 
   } 
  } 
  return mWidth; 
 } 
 
 private int measuredHeight(int heightMeasureSpec) { 
  int Mode = MeasureSpec.getMode(heightMeasureSpec); 
  int Size = MeasureSpec.getSize(heightMeasureSpec); 
  if (Mode == MeasureSpec.EXACTLY) { 
   mHeight = Size; 
  } else { 
   //由圖片決定高度 
   int value = getPaddingTop() + getPaddingBottom() + bitmap.getHeight(); 
   if (Mode == MeasureSpec.AT_MOST) { 
    //由圖片和Padding決定高度，但是不能超過View的高 
    mHeight = Math.min(value, Size); 
   } 
  } 
  return mHeight; 
 } 
 
 @Override 
 protected void onDraw(Canvas canvas) { 
  super.onDraw(canvas); 
  canvas.concat(matrix); 
  //真實的半徑必須是View的寬高最小值 
  radius = Math.min(mWidth, mHeight); 
  //如果圖片本身寬高太大，進行相應的縮放 
  bitmap = Bitmap.createScaledBitmap(bitmap, radius, radius, false); 
  //畫圓形圖片 
  canvas.drawBitmap(createCircleImage(bitmap, radius), 0, 0, null); 
  matrix.reset(); 
 } 
 
 private Bitmap createCircleImage(Bitmap source, int radius) { 
  Paint paint = new Paint(); 
  paint.setAntiAlias(true); 
  Bitmap target = Bitmap.createBitmap(radius, radius, Bitmap.Config.ARGB_8888); 
  //產生一個同樣大小的畫布 
  Canvas canvas = new Canvas(target); 
  //首先繪制圓形 
  canvas.drawCircle(radius / 2, radius / 2, radius / 2, paint); 
  //使用SRC_IN模式顯示后畫圖的交集處 
  paint.setXfermode(new PorterDuffXfermode(PorterDuff.Mode.SRC_IN)); 
  //繪制圖片，從（0，0）畫 
  canvas.drawBitmap(source, 0, 0, paint); 
  return target; 
 } 
}

以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: