base64_encode和base64_decode的JAVA實現
Base64是網絡上最常見的用于傳輸8Bit字節代碼的編碼方式之一,大家可以查看RFC2045~RFC2049,上面有MIME的詳細規范。 Base64要求把每三個8Bit的字節轉換為四個6Bit的字節(3*8 = 4*6 = 24),然后把6Bit再添兩位高位0,組成四個8Bit的字節,也就是說,轉換后的字符串理論上將要比原來的長1/3
php 的函數:base64_encode() 和 base64_decode()
base64的編,解碼原理
Base64 編碼其實是將3個8位字節轉換為4個6位字節,( 3*8 = 4*6 = 24 ) 這4個六位字節 其實仍然是8位,只不過高兩位被設置為0. 當一個字節只有6位有效時,它的取值空間為0 到 2的6次方減1 即63,也就是說被轉換的Base64編碼的每一個編碼的取值空間為(0~63) 。
事實上,0~63之間的ASCII碼有許多不可見字符,所以應該再做一個映射,映射表為
'A' ~ 'Z' ? ASCII(0 ~ 25)
'a' ~ 'z' ? ASCII(26 ~ 51)
'0' ~ '9' ? ASCII(52 ~ 61)
' ' ? ASCII(62)
'/' ? ASCII(63)
這樣就可以將3個8位字節,轉換為4個可見字符。
具體的字節拆分方法為:(圖(畫得不好,領會精神 :-))
aaaaaabb ccccdddd eeffffff //abcdef其實就是1或0,為了看的清楚就用abcdef代替
~~~~~~~~ ~~~~~~~~ ~~~~~~~~
字節 1 字節 2 字節 3
||
\/
00aaaaaa 00bbcccc 00ddddee 00ffffff
注:上面的三個字節位原文,下面四個字節為Base64編碼,其前兩位均為0。
這樣拆分的時候,原文的字節數量應該是3的倍數,當這個條件不能滿足時,用全零字節
補足,轉化時Base64編碼用=號代替,這就是為什么有些Base64編碼以一個或兩個等號結
束的原因,但等號最多有兩個,因?yàn)椋喝绻鸉(origin)代表原文的字節數,F(xiàn)(remain)代
表余數,則
F(remain) = F(origin) MOD 3 成立。
所以F(remain)的可能取值為0,1,2.
如果設 n = [F(origin) – F(remain)] / 3
當F(remain) = 0 時,恰好轉換為4*n個字節的Base64編碼。
當F(remain) = 1 時,由于一個原文字節可以拆分為屬于兩個Base64編碼的字節,為了
讓Base64編碼是4的倍數,所以應該為補2個等號。
當F(remain) = 2 時,由于兩個原文字節可以拆分為屬于3個Base64編碼的字節,同理,
應該補上一個等號。
base64 編碼后的字符串末尾會有0到2個等號,這些等號在解碼是并不必要,所以可以刪除。
在網絡GET 和 POST參數列表的時候,‘+'不能正常傳輸,可以把它替換成‘|'
這樣經過base64編碼后的字符串就只有‘|'和‘/‘,所以經過這樣處理base64編碼的字符串可以作為參數列表的以個參數值來傳輸
========================================================================
以下是老外寫的一個實現:
package com.meterware.httpunit;
/********************************************************************************************************************
* $Id: Base64.java,v 1.4 2002/12/24 15:17:17 russgold Exp $
*
* Copyright (c) 2000-2002 by Russell Gold
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
* documentation files (the "Software "), to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and
* to permit persons to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS ", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
* THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
*******************************************************************************************************************/
/**
* A utility class to convert to and from base 64 encoding.
*
* @author <a href= "mailto:russgold@httpunit.org "> Russell Gold </a>
**/
public class Base64 { final static String encodingChar = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/ "; /** * Returns the base 64 encoded equivalent of a supplied string. * @param source the string to encode */ public static String encode( String source ) { char[] sourceBytes = getPaddedBytes( source ); int numGroups = (sourceBytes.length + 2) / 3; char[] targetBytes = new char[4]; char[] target = new char[ 4 * numGroups ]; for (int group = 0; group < numGroups; group++) { convert3To4( sourceBytes, group*3, targetBytes ); for (int i = 0; i < targetBytes.length; i++) { target[ i + 4*group ] = encodingChar.charAt( targetBytes[i] ); } } int numPadBytes = sourceBytes.length - source.length(); for (int i = target.length-numPadBytes; i < target.length; i++) target[i] = '= '; return new String( target ); } private static char[] getPaddedBytes( String source ) { char[] converted = source.toCharArray(); int requiredLength = 3 * ((converted.length+2) /3); char[] result = new char[ requiredLength ]; System.arraycopy( converted, 0, result, 0, converted.length ); return result; } private static void convert3To4( char[] source, int sourceIndex, char[] target ) { target[0] = (char) ( source[ sourceIndex ] > > > 2); target[1] = (char) (((source[ sourceIndex ] & 0x03) < < 4) | (source[ sourceIndex+1 ] > > > 4)); target[2] = (char) (((source[ sourceIndex+1 ] & 0x0f) < < 2) | (source[ sourceIndex+2 ] > > > 6)); target[3] = (char) ( source[ sourceIndex+2 ] & 0x3f); } /** * Returns the plaintext equivalent of a base 64-encoded string. * @param source a base 64 string (which must have a multiple of 4 characters) */ public static String decode( String source ) { if (source.length()%4 != 0) throw new RuntimeException( "valid Base64 codes have a multiple of 4 characters " ); int numGroups = source.length() / 4; int numExtraBytes = source.endsWith( "== " ) ? 2 : (source.endsWith( "= " ) ? 1 : 0); byte[] targetBytes = new byte[ 3*numGroups ]; byte[] sourceBytes = new byte[4]; for (int group = 0; group < numGroups; group++) { for (int i = 0; i < sourceBytes.length; i++) { sourceBytes[i] = (byte) Math.max( 0, encodingChar.indexOf( source.charAt( 4*group+i ) ) ); } convert4To3( sourceBytes, targetBytes, group*3 ); } return new String( targetBytes, 0, targetBytes.length - numExtraBytes ); } private static void convert4To3( byte[] source, byte[] target, int targetIndex ) { target[ targetIndex ] = (byte) (( source[0] < < 2) | (source[1] > > > 4)); target[ targetIndex+1 ] = (byte) (((source[1] & 0x0f) < < 4) | (source[2] > > > 2)); target[ targetIndex+2 ] = (byte) (((source[2] & 0x03) < < 6) | (source[3])); } }
相關文章
用html css javascript打造自己的RIA圖文教程
用html&css&javascript打造自己的RIA之一,包括了配置等2009-07-07
Java Stream中的Spliterator類概念及原理解析
Spliterator是Java 8引入的一個接口,位于java.util包中,它結合了迭代器(Iterator)的遍歷能力和分割器(Splitter)的分割能力,本文將詳細介紹Spliterator的概念、原理、作用、類中定義的關鍵方法,以及它在Stream API中的實際應用,感興趣的朋友一起看看吧2024-08-08
IntelliJ IDEA全局內容搜索和替換教程圖解
很多朋友在做項目時,會在整個項目里活指定文件夾下進行全局搜索和替換,下面小編給大家?guī)?lái)了IntelliJ IDEA全局內容搜索和替換教程圖解,需要的朋友參考下吧2018-04-04
Springboot pom項目間接依賴包版本與預期不符原因解決分析
這篇文章主要介紹了Springboot pom項目間接依賴包版本與預期不符原因解決分析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-08-08
java json 省市級聯實例代碼
這篇文章介紹了java json 省市級聯實例代碼,有需要的朋友可以參考一下2013-09-09

