CREATE TRIGGER trigger_name
ON table_name
[WITH ENCRYPTION]
FOR [DELETE, INSERT, UPDATE]
AS
T-SQL語句
GO

/*創建insert觸發器，在上網記錄表recordInfo上創建插入觸發器*/
create trigger tr_insert_recordInfo
on recordInfo
for insert
as
/*定義變量，用于臨時存儲插入的會員號、電腦編號和卡的編號*/
declare @cardId char()
declare @PCId int
declare @CardNumber char()
/*從inserted臨時表中獲取插入的記錄行的信息，包括電腦的編號、卡的編號*/
select @PCId=PCId,@cardId=CardId from inserted
/*根據電腦編號修改電腦的使用狀態*/
update PCInfo set PCUse= where PCId=@PCId
/*根據卡的編號查詢會員號*/
select @CardNumber=CardNumber from cardinfo where CardId=@cardid
/*顯示上機成功的信息*/
print '上機成功！會員號是：'+@CardNumber+'機器號是：'+convert(char(),@PCId)
go
----插入測試數據，會員號為的上機
set nocount on --不顯示sql語句影響的記錄行數
declare @CardId int ---聲明一個存儲卡的編號的變量
---根據會員號查處卡的編號
select @cardId=cardid from cardinfo where cardNumber='c' 
---向recordInfo表中插入一條記錄信息，卡的編號、電腦編號和上機時間
insert into recordInfo(cardId,PCId,beginTime) values(@cardId,,getDate())
----查看結果
select * from recordInfo
select * from PCInfo

---創建delete觸發器,在上網記錄表RecordInfo上創建刪除觸發器
create trigger tr_delete_recordInfo
on recordInfo
for delete
as
if exists(select * from sysobjects where name='backRecordInfo')
----如果backrecordInfo表存在，就添加記錄即可
insert into backRecordInfo select * from deleted
else
----創建backRecordInfo表，從deleted中獲取被刪除的數據
select * into backRecordInfo from deleted
print'backRecordInfo表備份數據成功，備份表中的數據為：'
select * from backRecordInfo
go
-------關鍵代碼------
----測試delete觸發器，刪除數據
set nocount on
delete from recordInfo
---查看結果
print'記錄表中的數據為：'
select * from recordInfo

-------關鍵代碼------
create trigger tr_update_recordInfo
on recordInfo
for update
as
declare @beforePCId int
declare @afterPCId int
select @beforePCId =PCId from deleted
select @afterPCId=PCID from inserted
---根據電腦編號修改使用狀態-----
---根據以前使用的電腦編號把電腦的使用狀態改為：
update PCInfo set PCUse= where PCId=@beforePCId
---根據現在使用的電腦編號把電腦的使用狀態改為:
update PCInfo set PCUse= where PCId=@afterPCId
----顯示電腦換機成功
print'換機成功！從'+convert(varchar(),@beforePCId)+'號電腦換到'+convert(varchar(),@afterPCId)+'號電腦'
go
/*測試update觸發器，修改電腦編號*/
--顯示更改前,記錄表中的數據
print'更改前，記錄表中的數據'
select * from recordInfo
--顯示更改前，電腦表中的數據
print'更改前，電腦表中的數據'
select * from PCInfo
set nocount on
---把電腦號為的改為
update recordInfo set PCId= where PCId= 
---查看結果
print'更改后，記錄表中的數據'
select * from recordInfo
print'更改后，電腦表中的數據'
select * from PCInfo

---創建update觸發器，在上網記錄表recordInfo上創建修改（列）觸發器
create trigger tr_updateColum1_recordInfo
on recordInfo
instead of insert
as
declare @cardbalance int --聲明用于存儲用戶余額的變量
declare @CardId int --聲明用于存儲用戶卡的編號的變量
declare @PCId int --聲明用于存儲電腦編號的變量
---inserted臨時表中獲取插入的記錄行信息，包括電腦編號、卡的編號
select @cardId=cardId,@PCId=PCId from inserted
select @cardbalance=cardBalance from cardInfo where CardId=@CardId
print'您的余額為：'+convert(varchar(10),@cardBalance) ---打印余額信息
if(@cardBalance<2) ---判斷余額多少，看能否正常上機
print'余額小于元，不能上機。請盡快充值！'
else
----根據電腦的編號修改電腦的使用狀態更改為正在使用
update PCInfo set PCUse=1 where PCId=@PCId
----向recordInfo表插入上機記錄
insert into recordInfo(cardId,PCId,beginTime)values(@CardId,@PCId,getdate())
print'上機成功'
-------關鍵代碼------
set nocount on
declare @cardId int ---聲明一個存儲卡的編號的變量
---根據會員號查出卡的編號
select @cardId=cardId from cardInfo where cardNumber='c001'
----向recordInfo表中插入一條記錄信息，卡的編號、電腦的編號和上機時間
insert into recordInfo(cardId,PCId,beginTime)values(@cardId,1,getdate())
select * from recordInfo
select * from PCInfo