Nginx配置srcache_nginx模塊搭配Redis建立緩存系統
1. nginx模塊
--add-module=../modules/ngx_devel_kit-0.2.18 --add-module=../modules/set-misc-nginx-module-0.22rc8 --add-module=../modules/srcache-nginx-module-0.22 --add-module=../modules/redis-nginx-module-0.3.6 --add-module=../modules/redis2-nginx-module-0.10
2. redis安裝配置
# vim redis.conf
daemonize yes pidfile /var/run/redis-6379.pid port 6379 bind 127.0.0.1 timeout 0 tcp-keepalive 0 loglevel notice logfile stdout databases 16 stop-writes-on-bgsave-error yes rdbcompression yes rdbchecksum yes dbfilename dump.rdb slave-serve-stale-data yes slave-read-only yes repl-disable-tcp-nodelay no slave-priority 100 maxmemory 8096mb maxmemory-policy volatile-ttl appendonly no appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb lua-time-limit 5000 slowlog-log-slower-than 10000 slowlog-max-len 128 hash-max-ziplist-entries 512 hash-max-ziplist-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes client-output-buffer-limit normal 0 0 0 client-output-buffer-limit slave 256mb 64mb 60 client-output-buffer-limit pubsub 32mb 8mb 60 hz 10 aof-rewrite-incremental-fsync yes
由于只把redis當做緩存使用,因此沒有啟用持久化。
3. nginx配置
# vim nginx.conf
http
{
include mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'"$status" $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for" '
'"$gzip_ratio" $request_time $bytes_sent $request_length';
log_format srcache_log '$remote_addr - $remote_user [$time_local] "$request" '
'"$status" $body_bytes_sent $request_time $bytes_sent $request_length '
'[$upstream_response_time] [$srcache_fetch_status] [$srcache_store_status] [$srcache_expire]';
set_real_ip_from 10.0.0.0/8;
real_ip_header X-Forwarded-For;
include vhosts/test.jb51.net.conf;
}
# vim vhosts/test.jb51.net.conf
upstream redis {
server 127.0.0.1:6379;
keepalive 512;
}
server
{
listen 80;
server_name test.jb51.net;
index index.html index.htm index.php;
root /data/test.jb51.net/webroot;
location ~ .*\.php {
srcache_store_private on;
srcache_methods GET;
srcache_response_cache_control off;
if ($uri ~ /jb51.net/pp.php$){
set $key $request_uri;
set_escape_uri $escaped_key $key;
srcache_fetch GET /redis $key;
srcache_default_expire 172800;
srcache_store PUT /redis2 key=$escaped_key&exptime=$srcache_expire;
#add_header X-Cached-From $srcache_fetch_status;
#set_md5 $md5key $key;
#add_header X-md5-key $md5key;
#add_header X-Cached-Store $srcache_store_status;
#add_header X-Key $key;
#add_header X-Query_String $query_string;
#add_header X-expire $srcache_expire;
access_log /data/httplogs/test.jb51.net-photo-access.log srcache_log;
}
include fastcgi_params;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_connect_timeout 60;
fastcgi_send_timeout 180;
fastcgi_read_timeout 180;
fastcgi_buffer_size 128k;
fastcgi_buffers 4 256k;
fastcgi_busy_buffers_size 256k;
fastcgi_temp_file_write_size 256k;
fastcgi_intercept_errors on;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_split_path_info ^(.+\.php)(.*)$;
fastcgi_param PATH_INFO $fastcgi_path_info;
}
location = /redis {
internal;
set_md5 $redis_key $args;
redis_pass redis;
}
location = /redis2 {
internal;
set_unescape_uri $exptime $arg_exptime;
set_unescape_uri $key $arg_key;
set_md5 $key;
redis2_query set $key $echo_request_body;
redis2_query expire $key $exptime;
redis2_pass redis;
}
error_log /data/httplogs/test.jb51.net-error.log;
access_log /data/httplogs/test.jb51.net-aceess.log main;
}
4. 測試
沒有做緩存狀態:

有做緩存狀態:

5. 響應頭狀態
第一次請求:

再次請求:

6. 查看redis是否緩存以及過期時間

PS:srcache-nginx-module模塊指令說明:
srcache_fetch
語法:srcache_fetch <method> <uri> <args>?
默認值:no
配置段:http, server, location, location if
查詢緩存。返回200說明緩存命中,直接從緩存響應客戶端請求。非200需要后端程序處理。
srcache_fetch_skip
語法:srcache_fetch_skip <flag>
默認值:srcache_fetch_skip 0
配置段:http, server, location, location if
<flag>支持nginx變量。當這個參數值不為空和不等于0,則從緩存取數據過程被無條件跳過。
srcache_store
語法:srcache_store <method> <uri> <args>?
默認值:no
配置段:http, server, location, location if
將當前請求的響應存入緩存??梢允褂胹rcache_store_skip和srcache_store_max_size指令禁用緩存。不管是響應狀態行,響應頭,響應體都會被緩存。默認情況下,下列特殊響應頭不會被緩存:
- Connection
- Keep-Alive
- Proxy-Authenticate
- Proxy-Authorization
- TE
- Trailers
- Transfer-Encoding
- Upgrade
- Set-Cookie
可以使用srcache_store_pass_header、srcache_store_hide_header指令來控制哪些頭要緩存哪些不要。
注意:即使所有的響應數據被立即發送,當前的nginx請求生命周期未必完成,直到srcache_store子請求完成。這意味著服務器端延遲關閉TCP連接,或下一個請求服務發送同一個TCP連接。
srcache_store_max_size
語法:srcache_store_max_size <size>
默認值:srcache_store_max_size 0
配置段:http, server, location, location if
當響應體超過該值,將不會緩存。
當后端緩存存儲有對緩存數據做硬限制,這個指令非常有用。比如memcached服務器,上限是1M。
默認值0,不限制。
srcache_store_skip
語法:srcache_store_skip <flag>
默認值:srcache_store_skip 0
配置段:http, server, location, location if
<flag>支持nginx變量。當這個參數值不為空和不等于0,則從存入緩存過程被無條件跳過。
srcache_store_statuses
語法:srcache_store_statuses <status1> <status2> ..
默認值:srcache_store_statuses 200 301 302
配置段:http, server, location, location if
該指令控制那些狀態碼響應被緩存。
srcache_header_buffer_size
語法:srcache_header_buffer_size <size>
默認值:srcache_header_buffer_size 4k/8k
配置段:http, server, location, location if
在序列化響應頭時控制頭緩沖大小。默認大小為頁面大小,通常為4k或8k,取決于具體平臺。
注意:該大小是以每個頭的,因此,需要足夠大來容納最大響應頭。
srcache_store_hide_header
語法:srcache_store_hide_header <header>
默認值:no
配置段:http, server, location, location if
默認情況下,除了以下頭緩存所有響應頭:
- Connection
- Keep-Alive
- Proxy-Authenticate
- Proxy-Authorization
- TE
- Trailers
- Transfer-Encoding
- Upgrade
- Set-Cookie
可以隱藏多個響應頭,不區分大小寫。如
srcache_store_hide_header X-Foo; srcache_store_hide_header Last-Modified;srcache_store_pass_header
語法:srcache_store_pass_header <header>
默認值:no
配置段:http, server, location, location if
默認情況下,除了以下頭緩存所有響應頭:
- Connection
- Keep-Alive
- Proxy-Authenticate
- Proxy-Authorization
- TE
- Trailers
- Transfer-Encoding
- Upgrade
- Set-Cookie
可以緩存多個響應頭,不區分大小寫。如
srcache_store_pass_header Set-Cookie; srcache_store_pass_header Proxy-Autenticate;
srcache_methods
語法:srcache_methods <method>...
默認值:srcache_methods GET HEAD
配置段:http, server, location
srcache_ignore_content_encoding
語法:srcache_ignore_content_encoding on|off
默認值: srcache_ignore_content_encoding off
配置段:http, server, location, location if
內容是否編碼。
建議后端服務器禁用gzip/deflate壓縮。在nginx.conf配置:
proxy_set_header Accept-Encoding "";
srcache_request_cache_control
語法:srcache_request_cache_control on|off
默認值:srcache_request_cache_control off
配置段:http, server, location
當該指令為on時,請求頭Cache-Control和Pragma按照下面的方法處理:
1. srcache_fetch查詢緩存操作時,當請求頭Cache-Control: no-cache 、 Pragma: no-cache 將跳過。
2. srcache_store存入緩存操作時,當請求頭Cache-Control: no-store將跳過。
當該指令為off時,將禁用此功能,對于繁忙的站點依賴緩存加速被認為是最安全的。
srcache_response_cache_control
語法:srcache_response_cache_control on|off
默認值:srcache_response_cache_control on
配置段:http, server, location
當該指令為on時,響應頭Cache-Control和Expires按照下面的方法處理:
Cache-Control: private skips srcache_store, Cache-Control: no-store skips srcache_store, Cache-Control: no-cache skips srcache_store, Cache-Control: max-age=0 skips srcache_store, Expires: <date-no-more-recently-than-now> skips srcache_store.
該指令優先級比srcache_store_no_store,srcache_store_no_cache,srcache_store_private高。
srcache_store_no_store
語法:srcache_store_no_store on|off
默認值:srcache_store_no_store off
配置段:http, server, location
開啟該指令,將強制響應頭Cache-Control: no-store。默認為關閉。
srcache_store_no_cache
語法:srcache_store_no_cache on|off
默認值:srcache_store_no_cache off
配置段:http, server, location
開啟該指令,將強制響應頭Cache-Control: no-cache。默認為關閉。
srcache_store_private
語法:srcache_store_private on|off
默認值:srcache_store_private off
配置段:http, server, location
開啟該指令,將強制響應頭Cache-Control: private。默認為關閉。
srcache_default_expire
語法:srcache_default_expire <time>
默認值:srcache_default_expire 60s
配置段:http, server, location, location if
控制默認過期時間。當響應頭既沒有Cache-Control: max-age=N也沒有指定Expires時,允許的$srcache_expire變量值。
該值必須小于597hours。
srcache_max_expire
語法:srcache_max_expire <time>
默認值:srcache_max_expire 0
配置段:http, server, location, location if
控制最大緩存時間,此設置優先級高于其他計算方法。
該值必須小于597hours。
默認為0,不限制。
相關文章
通過Nginx搭建Tomcat9集群并實現Session共享
這篇文章主要介紹了通過Nginx搭建Tomcat9集群并實現Session共享,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-06-06
nginx提示:500 Internal Server Error錯誤的解決方法
本文章來給大家總結了大量關于導致nginx中提示500 Internal Server Error錯誤的原因總結與解決方法分析有需要了解的朋友可參考參考2013-04-04
Nginx配置實現用IP灰度測試(不同用戶ID)
本文主要介紹了使用Nginx配置實現基于IP的灰度發布實驗,以及如何通過不同用戶ID測試灰度發布,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-11-11

