Python實現控制臺進度條功能
更新時間：2016年01月04日 10:36:46 投稿：lijiao
這篇文章主要介紹了Python實現控制臺進度條功能，Python中如何寫控制臺進度條，本文為大家揭曉，感興趣的小伙伴們可以參考一下
本文實例講述了Python顯示進度條的方法，是Python程序設計中非常實用的技巧。分享給大家供大家參考。具體方法如下：
首先，進度條和一般的print區別在哪里呢？
答案就是print會輸出一個\n，也就是換行符，這樣光標移動到了下一行行首，接著輸出，之前已經通過stdout輸出的東西依舊保留，而且保證我們?cè)谙旅婵吹阶钚碌妮敵鼋Y(jié)果。
進度條不然，我們必須再原地輸出才能保證他是一個進度條，否則換行了怎么還叫進度條？
最簡單的辦法就是，再輸出完畢后，把光標移動到行首，繼續在那里輸出更長的進度條即可實現，新的更長的進度條把舊的短覆蓋，就形成了動畫效果。
可以想到那個轉義符了吧，那就是\ r。
轉義符r就可以把光標移動到行首而不換行，轉義符n就把光標移動到行首并且換行。
在python中，輸出stdout(標準輸出)可以使用sys.stdout.write
例如：
Python
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
j = '#'
if __name__ == '__main__':
for i in range(1,61):
j += '#'
sys.stdout.write(str(int((i/60)*100))+'% ||'+j+'->'+"\r")
sys.stdout.flush()
time.sleep(0.5)
print
第二種思路是用轉義符\b
轉義符\b是退格鍵，也就是說把輸出的光標往回退格子，這樣就可以不用+=了，例如：
Python
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
if __name__ == '__main__':
for i in range(1,61):
sys.stdout.write('#'+'->'+"\b\b")
sys.stdout.flush()
time.sleep(0.5)
print
光標回退2格，寫個#再回退，再寫，達到增長的目的了
不過寫這么多似乎是廢話，在耳邊常常聽到一句話：那就是不要重復造輪子。實際上python有豐富發lib幫你實現這個東西，你完全可以把心思放在邏輯開發上而不用注意這些小細節
下面要介紹的就是這個類“progressbar”(http://code.google.com/p/python-progressbar/)，使用easy_install可以方便的安裝這個類庫，其實就一個文件，拿過來放到文件同一個目錄下面也直接可以import過來
如下圖所示：
下面就是基本使用舉例：
Python
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
from progressbar import *
total = 1000
#基本用法
progress = ProgressBar()
for i in progress(range(total)):
time.sleep(0.01)
pbar = ProgressBar().start()
for i in range(1,1000):
pbar.update(int((i/(total-1))*100))
time.sleep(0.01)
pbar.finish()
#高級用法
widgets = ['Progress: ', Percentage(), ' ', Bar(marker=RotatingMarker('>-=')),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10*i+1)
time.sleep(0.0001)
pbar.finish()
官方示例:http://code.google.com/p/python-progressbar/source/browse/progressbar/examples.py
Python
# coding:utf-8
import sys
import time
from progressbar import AnimatedMarker, Bar, BouncingBar, Counter, ETA, \
FileTransferSpeed, FormatLabel, Percentage, \
ProgressBar, ReverseBar, RotatingMarker, \
SimpleProgress, Timer
examples = []
def example(fn):
try:
name = 'Example %d' % int(fn.__name__[7:])
except:
name = fn.__name__
def wrapped():
try:
sys.stdout.write('Running: %s\n' % name)
fn()
sys.stdout.write('\n')
except KeyboardInterrupt:
sys.stdout.write('\nSkipping example.\n\n')
examples.append(wrapped)
return wrapped
@example
def example0():
pbar = ProgressBar(widgets=[Percentage(), Bar()], maxval=300).start()
for i in range(300):
time.sleep(0.01)
pbar.update(i + 1)
pbar.finish()
@example
def example1():
widgets = ['Test: ', Percentage(), ' ', Bar(marker=RotatingMarker()),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10 * i + 1)
pbar.finish()
@example
def example2():
class CrazyFileTransferSpeed(FileTransferSpeed):
"""It's bigger between 45 and 80 percent."""
def update(self, pbar):
if 45 < pbar.percentage() < 80:
return 'Bigger Now ' + FileTransferSpeed.update(self, pbar)
else:
return FileTransferSpeed.update(self, pbar)
widgets = [CrazyFileTransferSpeed(), ' <<<', Bar(), '>>> ',
Percentage(), ' ', ETA()]
pbar = ProgressBar(widgets=widgets, maxval=10000000)
# maybe do something
pbar.start()
for i in range(2000000):
# do something
pbar.update(5 * i + 1)
pbar.finish()
@example
def example3():
widgets = [Bar('>'), ' ', ETA(), ' ', ReverseBar('<')]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10 * i + 1)
pbar.finish()
@example
def example4():
widgets = ['Test: ', Percentage(), ' ',
Bar(marker='0', left='[', right=']'),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=500)
pbar.start()
for i in range(100, 500 + 1, 50):
time.sleep(0.2)
pbar.update(i)
pbar.finish()
@example
def example5():
pbar = ProgressBar(widgets=[SimpleProgress()], maxval=17).start()
for i in range(17):
time.sleep(0.2)
pbar.update(i + 1)
pbar.finish()
@example
def example6():
pbar = ProgressBar().start()
for i in range(100):
time.sleep(0.01)
pbar.update(i + 1)
pbar.finish()
@example
def example7():
pbar = ProgressBar() # Progressbar can guess maxval automatically.
for i in pbar(range(80)):
time.sleep(0.01)
@example
def example8():
pbar = ProgressBar(maxval=80) # Progressbar can't guess maxval.
for i in pbar((i for i in range(80))):
time.sleep(0.01)
@example
def example9():
pbar = ProgressBar(widgets=['Working: ', AnimatedMarker()])
for i in pbar((i for i in range(50))):
time.sleep(.08)
@example
def example10():
widgets = ['Processed: ', Counter(), ' lines (', Timer(), ')']
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(150))):
time.sleep(0.1)
@example
def example11():
widgets = [FormatLabel('Processed: %(value)d lines (in: %(elapsed)s)')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(150))):
time.sleep(0.1)
@example
def example12():
widgets = ['Balloon: ', AnimatedMarker(markers='.oO<a )]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
@example
def example13():
# You may need python 3.x to see this correctly
try:
widgets = ['Arrows: ', AnimatedMarker(markers='←↖↑↗→↘↓↙')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError:
sys.stdout.write('Unicode error: skipping example')
@example
def example14():
# You may need python 3.x to see this correctly
try:
widgets = ['Arrows: ', AnimatedMarker(markers='◢◣◤◥')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError:
sys.stdout.write('Unicode error: skipping example')
@example
def example15():
# You may need python 3.x to see this correctly
try:
widgets = ['Wheels: ', AnimatedMarker(markers='◐◓◑◒')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError:
sys.stdout.write('Unicode error: skipping example')
@example
def example16():
widgets = [FormatLabel('Bouncer: value %(value)d - '), BouncingBar()]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(180))):
time.sleep(0.05)
@example
def example17():
widgets = [FormatLabel('Animated Bouncer: value %(value)d - '),
BouncingBar(marker=RotatingMarker())]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(180))):
time.sleep(0.05)
@example
def example18():
widgets = [Percentage(),
' ', Bar(),
' ', ETA(),
' ', AdaptiveETA()]
pbar = ProgressBar(widgets=widgets, maxval=500)
pbar.start()
for i in range(500):
time.sleep(0.01 + (i < 100) * 0.01 + (i > 400) * 0.9)
pbar.update(i + 1)
pbar.finish()
@example
def example19():
pbar = ProgressBar()
for i in pbar([]):
pass
pbar.finish()
try:
for example in examples:
example()
except KeyboardInterrupt:
sys.stdout('\nQuitting examples.\n')
再發一個類：
Python
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
"""
Usage:
Just A Template
"""
class progressbarClass:
def __init__(self, finalcount, progresschar=None):
import sys
self.finalcount=finalcount
self.blockcount=0
#
# See if caller passed me a character to use on the
# progress bar (like "*"). If not use the block
# character that makes it look like a real progress
# bar.
#
if not progresschar: self.block=chr(178)
else: self.block=progresschar
#
# Get pointer to sys.stdout so I can use the write/flush
# methods to display the progress bar.
#
self.f=sys.stdout
#
# If the final count is zero, don't start the progress gauge
#
if not self.finalcount : return
self.f.write('\n------------------- % Progress -------------------\n')
return
def progress(self, count):
#
# Make sure I don't try to go off the end (e.g. >100%)
#
count=min(count, self.finalcount)
#
# If finalcount is zero, I'm done
#
if self.finalcount:
percentcomplete=int(round(100*count/self.finalcount))
if percentcomplete < 1: percentcomplete=1
else:
percentcomplete=100
#print "percentcomplete=",percentcomplete
blockcount=int(percentcomplete/2)
#print "blockcount=",blockcount
if blockcount > self.blockcount:
for i in range(self.blockcount,blockcount):
self.f.write(self.block)
self.f.flush()
if percentcomplete == 100: self.f.write("\n")
self.blockcount=blockcount
return
if __name__ == "__main__":
from time import sleep
pb=progressbarClass(8,"*")
count=0
while count<9:
count+=1
pb.progress(count)
sleep(0.2)
另外，python cookbook中11.1節也提供了一個不錯的進度條類，代碼如下：
Python
import sys
class progressbar(object):
def __init__(self, finalcount, block_char='.'):
self.finalcount = finalcount
self.blockcount = 0
self.block = block_char
self.f = sys.stdout
if not self.finalcount:
return
self.f.write('\n------------------ % Progress -------------------1\n')
self.f.write(' 1 2 3 4 5 6 7 8 9 0\n')
self.f.write('----0----0----0----0----0----0----0----0----0----0\n')
def progress(self, count):
count = min(count, self.finalcount)
if self.finalcount:
percentcomplete = int(round(100.0 * count / self.finalcount))
if percentcomplete < 1:
percentcomplete = 1
else:
percentcomplete = 100
blockcount = int(percentcomplete // 2)
if blockcount <= self.blockcount:
return
for i in range(self.blockcount, blockcount):
self.f.write(self.block)
self.f.flush()
self.blockcount = blockcount
if percentcomplete == 100:
self.f.write("\n")
if __name__ == "__main__":
from time import sleep
pb = progressbar(8, "*")
for count in range(1, 9):
pb.progress(count)
sleep(0.2)
pb = progressbar(100)
pb.progress(20)
sleep(0.3)
pb.progress(47)
sleep(0.3)
pb.progress(90)
sleep(0.3)
pb.progress(100)
print "testing 1:"
pb = progressbar(1)
pb.progress(1)
運行結果如下圖所示：
希望本文所述對大家Python程序設計的學習有所幫助。
相關文章
這篇文章主要介紹了python亂序字符串排序的實現方式，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-11-11
數據清洗是數據分析和處理過程中一個至關重要的步驟,其中字段去重更是一個常見且關鍵的任務,下面我們看看如何利用Python進行表格字段智能去重吧2025-03-03
Python?中的lambda匿名函數和三元運算符
這篇文章主要介紹了Python?中的lambda匿名函數和三元運算符，使用關鍵字???lambda???定義，所以匿名函數又稱之為lambda表達式，下面文章更多相關內容需要的小伙伴可以參考一下2022-04-04
django可以自動生成這些create table, alter table, drop table的操作，這篇文章主要介紹了django+mysql的使用，具有一定的參考價值，感興趣的小伙伴們可以參考一下2018-11-11
本文主要介紹了Python中DataFrame中的xs用法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-04-04
這篇文章主要介紹了Python裝飾器原理與基本用法,結合實例形式分析了Python裝飾器的基本功能、原理、用法與操作注意事項,需要的朋友可以參考下2020-01-01
Python使用gTTS庫實現文本轉換為語音的詳細步驟
文本轉換為語音（Text-to-Speech,簡稱TTS）技術是人工智能的重要組成部分,廣泛應用于智能助手、導航系統、讀屏軟件和智能家居等領域,TTS技術使得機器能夠?qū)?shū)面文字轉換為自然流暢的語音,本文將介紹如何使用Python的gTTS庫實現簡單的TTS功能,需要的朋友可以參考下2024-07-07
在本篇文章里小編給大家整理的是關于python怎么使用百度文字識別功能的相關知識點，有興趣的朋友們參考下。2019-07-07
這篇文章主要介紹了python接口自動化測試之接口數據依賴的實現方法，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2021-08-08
這篇文章主要為大家介紹了Python函數的嵌套，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助2022-01-01