python實現端口轉發器的方法
本文實例講述了python實現端口轉發器的方法。分享給大家供大家參考。具體如下:
下面的python代碼實現端口轉發器,支持udp端口轉發
由于工作需要用到一個端口轉發器,并且要求支持TCP和UDP協議。在網上找了蠻久,但沒有中意的。于是就自己寫了一個。這個轉發器是基于python cookbook的一個示例改寫的,原先的這個示例只支持TCP協議,我這里增加了UDP協議的支持,程序?qū)懙牟辉趺春?,不過它確實能用!
portmap.py代碼如下:
'''
Created on 2012-5-8
@author: qh
'''
import time,socket,threading
def log(strLog):
strs=time.strftime("%Y-%m-%d %H:%M:%S")
print strs+"->"+strLog
class pipethread(threading.Thread):
'''
classdocs
'''
def __init__(self,source,sink):
'''
Constructor
'''
threading.Thread.__init__(self)
self.source=source
self.sink=sink
log("New Pipe create:%s->%s" % (self.source.getpeername(),self.sink.getpeername()))
def run(self):
while True:
try:
data=self.source.recv(1024)
if not data: break
self.sink.send(data)
except Exception ,ex:
log("redirect error:"+str(ex))
break
self.source.close()
self.sink.close()
class portmap(threading.Thread):
def __init__(self,port,newhost,newport,local_ip=''):
threading.Thread.__init__(self)
self.newhost=newhost
self.newport=newport
self.port=port
self.local_ip=local_ip
self.sock=None
self.sock=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
self.sock.bind((self.local_ip,port))
self.sock.listen(5)
log("start listen protocol:%s,port:%d " % ('tcp',port))
def run(self):
while True:
fwd=None
newsock=None
newsock,address=self.sock.accept()
log("new connection->protocol:%s,local port:%d,remote address:%s" % ('tcp',self.port,address[0]))
fwd=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
try:
fwd.connect((self.newhost,self.newport))
except Exception ,ex:
log("connet newhost error:"+str(ex))
break
p1=pipethread(newsock,fwd,self.protocol)
p1.start()
p2=pipethread(fwd,newsock,self.protocol)
p2.start()
class pipethreadUDP(threading.Thread):
def __init__(self,connection,connectionTable,table_lock):
threading.Thread.__init__(self)
self.connection=connection
self.connectionTable=connectionTable
self.table_lock=table_lock
log('new thread for new connction')
def run(self):
while True:
try:
data,addr=self.connection['socket'].recvfrom(4096)
#log('recv from addr"%s' % str(addr))
except Exception ,ex:
log("recvfrom error:"+str(ex))
break
try:
self.connection['lock'].acquire()
self.connection['Serversocket'].sendto(data,self.connection['address'])
#log('sendto address:%s' % str(self.connection['address']))
except Exception ,ex:
log("sendto error:"+str(ex))
break
finally:self.connection['lock'].release()
self.connection['time']=time.time()
self.connection['socket'].close()
log("thread exit for: %s" % str(self.connection['address']))
self.table_lock.acquire()
self.connectionTable.pop(self.connection['address'])
self.table_lock.release()
log('Release udp connection for timeout:%s' % str(self.connection['address']))
class portmapUDP(threading.Thread):
def __init__(self,port,newhost,newport,local_ip=''):
threading.Thread.__init__(self)
self.newhost=newhost
self.newport=newport
self.port=port
self.local_ip=local_ip
self.sock=socket.socket(socket.AF_INET,socket.SOCK_DGRAM)
self.sock.bind((self.local_ip,port))
self.connetcTable={}
self.port_lock=threading.Lock()
self.table_lock=threading.Lock()
self.timeout=300
#ScanUDP(self.connetcTable,self.table_lock).start()
log('udp port redirect run->local_ip:%s,local_port:%d,remote_ip:%s,remote_port:%d' % (local_ip,port,newhost,newport))
def run(self):
while True:
data,addr=self.sock.recvfrom(4096)
connection=None
newsock=None
self.table_lock.acquire()
connection=self.connetcTable.get(addr)
newconn=False
if connection is None:
connection={}
connection['address']=addr
newsock=socket.socket(socket.AF_INET,socket.SOCK_DGRAM)
newsock.settimeout(self.timeout)
connection['socket']=newsock
connection['lock']=self.port_lock
connection['Serversocket']=self.sock
connection['time']=time.time()
newconn=True
log('new connection:%s' % str(addr))
self.table_lock.release()
try:
connection['socket'].sendto(data,(self.newhost,self.newport))
except Exception ,ex:
log("sendto error:"+str(ex))
#break
if newconn:
self.connetcTable[addr]=connection
t1=pipethreadUDP(connection,self.connetcTable,self.table_lock)
t1.start()
log('main thread exit')
for key in self.connetcTable.keys():
self.connetcTable[key]['socket'].close()
if __name__=='__main__':
myp=portmapUDP(10061,'10.0.1.29',161)
myp.start()
#myp.__stop()
希望本文所述對大家的Python程序設計有所幫助。
相關文章
Python實現二叉搜索樹增刪改查
二叉搜索樹是一種特殊的二叉樹,在本文中,我將介紹如何用Python語言實現一個簡單的二叉搜索樹,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2023-08-08
Python數據結構與算法之常見的分配排序法示例【桶排序與基數排序】
這篇文章主要介紹了Python數據結構與算法之常見的分配排序法,結合實例形式分析了桶排序與基數排序的相關原理及實現技巧,需要的朋友可以參考下2017-12-12
Python跳出循環語句continue與break的區別
這篇文章主要介紹了Python跳出循環語句continue與break的區別,本文用實例來說明它們之間的區別,簡單易記易懂,需要的朋友可以參考下2014-08-08
淺談Python數學建模之固定費用問題
本文主要介紹了Python固定費用問題的建模與求解。學習 PuLP工具包中處理復雜問題的快捷使用方式2021-06-06
淺談Python實現Apriori算法介紹
這篇文章主要介紹了淺談Python實現Apriori算法介紹,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-12-12
Python+MySQL隨機試卷及答案生成程序的示例代碼
這篇文章主要介紹了Python+MySQL隨機試卷及答案生成程序的示例代碼,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-02-02

