快捷導航

分享個簡易版Linux服務器初始化Shell腳本

更新時間：2013年07月04日 16:56:42 作者：

該Shell腳本主要用于新安裝Linux服務器系統的初始化工作，包括關閉IPv6模塊，關閉SELinux，讓vim顯示顏色，設置系統語言編碼，優化系統服務，內核參數優化等

該Shell腳本主要用于新安裝Linux服務器系統的初始化工作，具體包括：

關閉IPv6模塊
關閉SELinux
讓vim顯示顏色
設置系統語言編碼
優化系統服務
內核參數優化等。
可以根據自己的實際情況修改，可用于生產環境。原作者是NetSeek，本人做了部分修改。

復制代碼代碼如下:

 
#!/bin/sh 
# desc: lsm03624 modified by www.webnginx.com 
#-------------------cut begin------------------------------------------- 
#welcome 
cat << EOF 
+--------------------------------------------------------------+ 
| === Welcome to Centos System init === | 
+--------------http://www.linuxtone.org------------------------+ 
+----------------------Author:NetSeek--------------------------+ 
EOF 
#disable ipv6 
cat << EOF 
+--------------------------------------------------------------+ 
| === Welcome to Disable IPV6 === | 
+--------------------------------------------------------------+ 
EOF 
echo "alias net-pf-10 off" >> /etc/modprobe.conf 
echo "alias ipv6 off" >> /etc/modprobe.conf 
/sbin/chkconfig --level 35 ip6tables off 
echo "ipv6 is disabled!" 

#disable selinux 
sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config 
echo "selinux is disabled,you must reboot!" 

#vim 
sed -i "8 s/^/alias vi='vim'/" /root/.bashrc 
echo 'syntax on' > /root/.vimrc 

#zh_cn 
sed -i -e 's/^LANG=.*/LANG="zh_CN.UTF-8"/' /etc/sysconfig/i18n 
# configure file max to 52100 
echo "* soft nofile 52100 
* hard nofile 52100" >> /etc/security/limits.conf 

#tunoff services 
#-------------------------------------------------------------------------------- 
cat << EOF 
+--------------------------------------------------------------+ 
| === Welcome to Tunoff services === | 
+--------------------------------------------------------------+ 
EOF 
#--------------------------------------------------------------------------------- 
for i in `ls /etc/rc3.d/S*` 
do 
CURSRV=`echo $i|cut -c 15-` 

echo $CURSRV 
case $CURSRV in 
cpuspeed | crond | irqbalance | microcode_ctl | mysqld | network | nginx | php-fpm | sendmail | sshd | syslog ) 
#這個啟動的系統服務根據具體的應用情況設置，其中network、sshd、syslog是三項必須要啟動的系統服務！ 
echo "Base services, Skip!" 

*) 
echo "change $CURSRV to off" 
chkconfig --level 235 $CURSRV off 
service $CURSRV stop 

esac 
done 

rm -rf /etc/sysctl.conf 
echo "net.ipv4.ip_forward = 0 
net.ipv4.conf.default.rp_filter = 1 
net.ipv4.conf.default.accept_source_route = 0 
kernel.sysrq = 0 
kernel.core_uses_pid = 1 
net.ipv4.tcp_syncookies = 1 
kernel.msgmnb = 65536 
kernel.msgmax = 65536 
kernel.shmmax = 68719476736 
kernel.shmall = 134217728 
net.ipv4.ip_local_port_range = 1024 65536 
net.core.rmem_max = 16777216 
net.core.wmem_max = 16777216 
net.ipv4.tcp_rmem = 4096 87380 16777216 
net.ipv4.tcp_wmem = 4096 65536 16777216 
net.ipv4.tcp_fin_timeout = 3 
net.ipv4.tcp_tw_recycle = 1 
net.core.netdev_max_backlog = 30000 
net.ipv4.tcp_no_metrics_save = 1 
net.core.somaxconn = 262144 
net.ipv4.tcp_syncookies = 0 
net.ipv4.tcp_max_orphans = 262144 
net.ipv4.tcp_max_syn_backlog = 262144 
net.ipv4.tcp_synack_retries = 2 
net.ipv4.tcp_syn_retries = 2 
vm.swappiness = 6" >> /etc/sysctl.conf 
echo "optimizited kernel configure was done!" 