// 消息存儲配置
private final MessageStoreConfig messageStoreConfig;
// CommitLog文件的存儲實現類
private final CommitLog commitLog;
// 消息隊列存儲緩存表，key是topic
private final ConcurrentMap<String/* topic */, ConcurrentMap<Integer/* queueId */, ConsumeQueue>> consumeQueueTable;
// MappedFile分配服務
private final AllocateMappedFileService allocateMappedFileService;
// 直接內存暫存池
private final TransientStorePool transientStorePool;
// broker狀態管理器
private final BrokerStatsManager brokerStatsManager;
// 鎖文件
// 目錄: ${user.home}/store/lock
private RandomAccessFile lockFile;

// org.apache.rocketmq.store.DefaultMessageStore#asyncPutMessage
public CompletableFuture<PutMessageResult> asyncPutMessage(MessageExtBrokerInner msg) {
    // 1. 存儲狀態校驗
    PutMessageStatus checkStoreStatus = this.checkStoreStatus();
    if (checkStoreStatus != PutMessageStatus.PUT_OK) {
        return CompletableFuture.completedFuture(new PutMessageResult(checkStoreStatus, null));
    }
    // 2. 校驗topic名稱和property長度
    PutMessageStatus msgCheckStatus = this.checkMessage(msg);
    if (msgCheckStatus == PutMessageStatus.MESSAGE_ILLEGAL) {
        return CompletableFuture.completedFuture(new PutMessageResult(msgCheckStatus, null));
    }
    // ...
    long beginTime = this.getSystemClock().now();
    // 3. 保存到commitLog
    CompletableFuture<PutMessageResult> putResultFuture = this.commitLog.asyncPutMessage(msg);
    //...
    return putResultFuture;
}

// org.apache.rocketmq.store.CommitLog#asyncPutMessage
public CompletableFuture<PutMessageResult> asyncPutMessage(final MessageExtBrokerInner msg) {
    // 1. 設置消息存儲時間戳和消息體CSC32信息
    msg.setStoreTimestamp(System.currentTimeMillis());     // 設置消息存儲時間
    msg.setBodyCRC(UtilAll.crc32(msg.getBody()));					 // 設置消息體CRC32校驗值
    // 2. 如果是非事務消息，或者是事務提交消息，判斷是否是是否是延遲消息，如果是延遲消息則設置延遲相關信息
    if (tranType == MessageSysFlag.TRANSACTION_NOT_TYPE
            || tranType == MessageSysFlag.TRANSACTION_COMMIT_TYPE) {
        // Delay Delivery
        // 如果延遲級別>0，說明是延遲消息
        if (msg.getDelayTimeLevel() > 0) {
            // 如果大于最大的延遲級別，則取最大的延遲級別
            if (msg.getDelayTimeLevel() > this.defaultMessageStore.getScheduleMessageService().getMaxDelayLevel()) {
                msg.setDelayTimeLevel(this.defaultMessageStore.getScheduleMessageService().getMaxDelayLevel());
            }
            // 消息topic改成延遲消息topic(SCHEDULE_TOPIC_XXXX)
            topic = TopicValidator.RMQ_SYS_SCHEDULE_TOPIC;
            // 延遲topic的queueId：延遲級別-1
            int queueId = ScheduleMessageService.delayLevel2QueueId(msg.getDelayTimeLevel());
            // 消息屬性中設置真實的QueueId
            MessageAccessor.putProperty(msg, MessageConst.PROPERTY_REAL_TOPIC, msg.getTopic());
            MessageAccessor.putProperty(msg, MessageConst.PROPERTY_REAL_QUEUE_ID, String.valueOf(msg.getQueueId()));
            msg.setPropertiesString(MessageDecoder.messageProperties2String(msg.getProperties()));
            // 把SCHEDULE_TOPIC_XXXX設置為當前消息的topic，消息先投遞到這個隊列中
            msg.setTopic(topic);
            msg.setQueueId(queueId);
        }
    }
  	// 3. 設置ip并構建存儲消息上下文信息
    msg.setBornHostV6Flag(); // 如果producer的ip是IpV6，則設置生產者IpV6 flag
    msg.setStoreHostAddressV6Flag(); // 如果如果broker的ip是IpV6，則設置BrokerIpV6 flag
    PutMessageThreadLocal putMessageThreadLocal = this.putMessageThreadLocal.get();
    // 構建存消息上下文
    PutMessageContext putMessageContext = new PutMessageContext(/*key值:topic-queueId*/generateKey(putMessageThreadLocal.getKeyBuilder()/*StringBuilder*/, msg));
  	// ... 省略部分代碼
}

// org.apache.rocketmq.store.CommitLog#asyncPutMessage
public CompletableFuture<PutMessageResult> asyncPutMessage(final MessageExtBrokerInner msg) {
    // ... 省略部分代碼
  	// 1. 消息保存鎖，默認是ReentrantLock互斥鎖
    putMessageLock.lock(); 
    try {
        // 2. 獲取最新的mappedFile
        MappedFile mappedFile = this.mappedFileQueue.getLastMappedFile();
        // 3. 如果獲取到的mappedFile是null說明之前沒有存儲消息
        // 如果mappedFile滿了，說明需要創建一個新的MappedFile
        if (null == mappedFile || mappedFile.isFull()) {
            mappedFile = this.mappedFileQueue.getLastMappedFile(0); 
        }
				// 如果創建mappedFile失敗，則返回異常信息
        if (null == mappedFile) {
            // 創建mappedFile失敗
            return CompletableFuture.completedFuture(new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, null));
        }
        // 4. 將消息保存的mappedFile中
        result = mappedFile.appendMessage(msg, this.appendMessageCallback, putMessageContext);
        // 5. 處理消息保存結果
      	switch (result.getStatus()) {
            case PUT_OK:
                break;
            // mappedFile滿了，重新創建mappedFile后再寫入消息
            case END_OF_FILE:
                unlockMappedFile = mappedFile;
                // 創建一個新的文件，然后重新寫入
                mappedFile = this.mappedFileQueue.getLastMappedFile(0);
								//...
     						// 寫消息
                result = mappedFile.appendMessage(msg, this.appendMessageCallback, putMessageContext);
                break;
            // ...
        }
    } finally {
      	// 6. 釋放鎖
        putMessageLock.unlock();
    }
		// ... 省略部分代碼
}

public AppendMessageResult appendMessagesInner(final MessageExt messageExt, final AppendMessageCallback cb,
        PutMessageContext putMessageContext) {
    // 獲取當前寫文件位置
    int currentPos = this.wrotePosition.get();
    // 如果寫文件位置小于文件size
    if (currentPos < this.fileSize) {
        ByteBuffer byteBuffer = writeBuffer != null ? writeBuffer.slice() : this.mappedByteBuffer.slice();
        byteBuffer.position(currentPos);
        AppendMessageResult result;
        // 如果是單條消息
        if (messageExt instanceof MessageExtBrokerInner) {
            result = cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos/*文件長度-當前寫位置，可以寫的長度*/,(MessageExtBrokerInner) messageExt, putMessageContext);
        } 
        //...
        // 更新當前寫文件位置和消息保存時間戳
        this.wrotePosition.addAndGet(result.getWroteBytes());
        this.storeTimestamp = result.getStoreTimestamp();
        return result;
    }
}

// org.apache.rocketmq.store.CommitLog.DefaultAppendMessageCallback#doAppend
public AppendMessageResult doAppend(final long fileFromOffset/*消息文件起始偏移量*/, final ByteBuffer byteBuffer, final int maxBlank/*文件可寫長度*/,final MessageExtBrokerInner msgInner, PutMessageContext putMessageContext) {
    // 1. 物理offset，文件起始o(jì)ffset+寫offset
    long wroteOffset = fileFromOffset + byteBuffer.position();
    // 創建消息id supplier
    Supplier<String> msgIdSupplier = () -> {
        int sysflag = msgInner.getSysFlag();
        int msgIdLen = (sysflag & MessageSysFlag.STOREHOSTADDRESS_V6_FLAG) == 0 ? 4 + 4 + 8 : 16 + 4 + 8;
        ByteBuffer msgIdBuffer = ByteBuffer.allocate(msgIdLen);
        MessageExt.socketAddress2ByteBuffer(msgInner.getStoreHost(), msgIdBuffer);
        msgIdBuffer.clear();//because socketAddress2ByteBuffer flip the buffer
        msgIdBuffer.putLong(msgIdLen - 8, wroteOffset);
        return UtilAll.bytes2string(msgIdBuffer.array());
    };
    // topic-ququeId
    String key = putMessageContext.getTopicQueueTableKey();
    // 獲取消息queue offset
    Long queueOffset = CommitLog.this.topicQueueTable.get(key);
    // 如果queueOffset是null，則將其置0
    if (null == queueOffset) {
        queueOffset = 0L;
        CommitLog.this.topicQueueTable.put(key, queueOffset);
    }
    // 獲取寫緩沖
    ByteBuffer preEncodeBuffer = msgInner.getEncodedBuff();
    final int msgLen = preEncodeBuffer.getInt(0);
    // 2. 判斷空間是否足夠，如果剩余空間不足，則保存TOTAL+MAGICCODE之后，返回BLANK_MAGIC_CODE
    if ((msgLen + END_FILE_MIN_BLANK_LENGTH) > maxBlank) {
        this.msgStoreItemMemory.clear();
        // 1 TOTALSIZE 寫消息總長度
        this.msgStoreItemMemory.putInt(maxBlank);
        // 2 MAGICCODE 寫魔數
        this.msgStoreItemMemory.putInt(CommitLog.BLANK_MAGIC_CODE);
        byteBuffer.put(this.msgStoreItemMemory.array(), 0, 8);
        return new AppendMessageResult(/*...*/);
    }
    int pos = 4/*totalSize*/ + 4/*magicCode*/ + 4/*bodyCRC*/ + 4/*queueId*/ + 4/*flag*/;
    // set隊列的offset，
    preEncodeBuffer.putLong(pos, queueOffset);
    pos += 8;
    // 設置物理offset: 文件起始o(jì)ffset+當前文件寫消息的offset
    preEncodeBuffer.putLong(pos, fileFromOffset + byteBuffer.position());
    int ipLen = (msgInner.getSysFlag() & MessageSysFlag.BORNHOST_V6_FLAG) == 0 ? 4 + 4 : 16 + 4;
    // set 8 SYSFLAG, 9 BORNTIMESTAMP, 10 BORNHOST, 11 STORETIMESTAMP
    pos += 8 + 4 + 8 + ipLen;
    // 設置存儲消息ip地址
    preEncodeBuffer.putLong(pos, msgInner.getStoreTimestamp());
    // 寫消息到隊列緩沖
    byteBuffer.put(preEncodeBuffer);
    msgInner.setEncodedBuff(null);
  	// 4. 返回消息保存結果
    AppendMessageResult result = new AppendMessageResult(AppendMessageStatus.PUT_OK, wroteOffset, msgLen, msgIdSupplier,
        msgInner.getStoreTimestamp(), queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
    return result;
}

public CompletableFuture<PutMessageResult> asyncPutMessage(final MessageExtBrokerInner msg) {
		// ... 省略部分代碼
    PutMessageResult putMessageResult = new PutMessageResult(PutMessageStatus.PUT_OK, result);
    // 1. 提交刷盤請求
    CompletableFuture<PutMessageStatus> flushResultFuture = submitFlushRequest(result, msg);
    // 2. 提交復制請求
    CompletableFuture<PutMessageStatus> replicaResultFuture = submitReplicaRequest(result, msg);
    // 3. 合并提交刷盤請求和提交復制請求結果
    return flushResultFuture.thenCombine(replicaResultFuture, (flushStatus, replicaStatus) -> {
        if (flushStatus != PutMessageStatus.PUT_OK) {
            putMessageResult.setPutMessageStatus(flushStatus);
        }
        if (replicaStatus != PutMessageStatus.PUT_OK) {
            putMessageResult.setPutMessageStatus(replicaStatus);
        }
        return putMessageResult;
    });
}