GoLand編寫 TCP 端口掃描器的詳細過程

更新時間：2023年05月09日 10:42:05 作者：QIAOPENGJUN

TCP，也就是傳輸控制協議（Transmission Control Protocol），這篇文章主要介紹了Go語言（Golang）編寫 TCP 端口掃描器,需要的朋友可以參考下

Go 語言編寫 TCP 掃描器

TCP

TCP，也就是傳輸控制協議（Transmission Control Protocol）。

TCP握手

建立 TCP連接（或者叫打開端口），需要3次握手

客戶端 -> 端口打開 ->服務器

syn （請求建立新連接）
syn-ack （同意創建新連接）
ack （表示響應）

服務端端口關閉 Closed Port
- client -syn-> Server
- Server -rst-> Client
如果存在防火墻 Filtered Port
- Client —syn (Timeout)— Firewall Server

非并發的 TCP 掃描器

創建目錄并在該目錄創建main.go 文件

~/Code/go via ?? v1.20.3 via ?? base
? mcd tcp-scanner
Code/go/tcp-scanner via ?? v1.20.3 via ?? base
? go mod init
go: cannot determine module path for source directory /Users/qiaopengjun/Code/go/tcp-scanner (outside GOPATH, module path must be specified)
Example usage:
	'go mod init example.com/m' to initialize a v0 or v1 module
	'go mod init example.com/m/v2' to initialize a v2 module
Run 'go help mod init' for more information.
Code/go/tcp-scanner via ?? v1.20.3 via ?? base
? go mod init tcp-scanner
go: creating new go.mod: module tcp-scanner
Code/go/tcp-scanner via ?? v1.20.3 via ?? base
? c
Code/go/tcp-scanner via ?? v1.20.3 via ?? base
?

main.go 文件

package main
import (
	"fmt"
	"net"
)
func main() {
	for i := 21; i < 120; i++ {
		address := fmt.Sprintf("20.194.168.28:%d", i)
		conn, err := net.Dial("tcp", address)
		if err != nil {
			fmt.Printf("%s failed 關閉了\n", address)
			continue
		}
		conn.Close()
		fmt.Printf("%s connected 打開了！??！\n", address)
	}
}

并發的 TCP 掃描器

package main
import (
	"fmt"
	"net"
	"sync"
	"time"
)
func main() {
	start := time.Now()
	var wg sync.WaitGroup
	for i := 21; i < 120; i++ {
		wg.Add(1)
		go func(j int) {
			defer wg.Done()
			address := fmt.Sprintf("20.194.168.28:%d", j)
			conn, err := net.Dial("tcp", address)
			if err != nil {
				fmt.Printf("%s 關閉了\n", address)
				return
			}
			conn.Close()
			fmt.Printf("%s 打開了?。?！\n", address)
		}(i)
	}
	wg.Wait()
	elapsed := time.Since(start) / 1e9
	fmt.Printf("\n\n%d seconds", elapsed)
}
// func main() {
// 	for i := 21; i < 120; i++ {
// 		address := fmt.Sprintf("20.194.168.28:%d", i)
// 		conn, err := net.Dial("tcp", address)
// 		if err != nil {
// 			fmt.Printf("%s failed 關閉了\n", address)
// 			continue
// 		}
// 		conn.Close()
// 		fmt.Printf("%s connected 打開了！??！\n", address)
// 	}
// }

并發的 TCP 掃描器 - WORKER 池

package main
import (
	"fmt"
	"sync"
)
func worker(ports chan int, wg *sync.WaitGroup) {
	for p := range ports {
		fmt.Println("p", p)
		wg.Done()
	}
}
func main() {
	ports := make(chan int, 100)
	var wg sync.WaitGroup
	for i := 0; i < cap(ports); i++ {
		go worker(ports, &wg)
	}
	for i := 1; i < 1024; i++ {
		wg.Add(1)
		ports <- i
	}
	wg.Wait()
	close(ports)
}
// func main() {
// 	start := time.Now()
// 	var wg sync.WaitGroup
// 	for i := 21; i < 120; i++ {
// 		wg.Add(1)
// 		go func(j int) {
// 			defer wg.Done()
// 			address := fmt.Sprintf("20.194.168.28:%d", j)
// 			conn, err := net.Dial("tcp", address)
// 			if err != nil {
// 				fmt.Printf("%s 關閉了\n", address)
// 				return
// 			}
// 			conn.Close()
// 			fmt.Printf("%s 打開了！??！\n", address)
// 		}(i)
// 	}
// 	wg.Wait()
// 	elapsed := time.Since(start) / 1e9
// 	fmt.Printf("\n\n%d seconds", elapsed)
// }
// func main() {
// 	for i := 21; i < 120; i++ {
// 		address := fmt.Sprintf("20.194.168.28:%d", i)
// 		conn, err := net.Dial("tcp", address)
// 		if err != nil {
// 			fmt.Printf("%s failed 關閉了\n", address)
// 			continue
// 		}
// 		conn.Close()
// 		fmt.Printf("%s connected 打開了?。?！\n", address)
// 	}
// }

優化之后

package main
import (
	"fmt"
	"net"
	"sort"
)
func worker(ports chan int, results chan int) {
	for p := range ports {
		address := fmt.Sprintf("20.194.168.28:%d", p)
		conn, err := net.Dial("tcp", address)
		if err != nil {
			results <- 0
			continue
		}
		conn.Close()
		results <- p
	}
}
func main() {
	ports := make(chan int, 100)
	results := make(chan int)
	var openports []int
	var closeports []int
	for i := 0; i < cap(ports); i++ {
		go worker(ports, results)
	}
	go func() {
		for i := 1; i < 1024; i++ {
			ports <- i
		}
	}()
	for i := 1; i < 1024; i++ {
		port := <-results
		if port != 0 {
			openports = append(openports, port)
		} else {
			closeports = append(closeports, port)
		}
	}
	close(ports)
	close(results)
	sort.Ints(openports)
	sort.Ints(closeports)
	for _, port := range closeports {
		fmt.Printf("%d closed\n", port)
	}
	for _, port := range openports {
		fmt.Printf("%d opened\n", port)
	}
}
// func main() {
// 	start := time.Now()
// 	var wg sync.WaitGroup
// 	for i := 21; i < 120; i++ {
// 		wg.Add(1)
// 		go func(j int) {
// 			defer wg.Done()
// 			address := fmt.Sprintf("20.194.168.28:%d", j)
// 			conn, err := net.Dial("tcp", address)
// 			if err != nil {
// 				fmt.Printf("%s 關閉了\n", address)
// 				return
// 			}
// 			conn.Close()
// 			fmt.Printf("%s 打開了?。?！\n", address)
// 		}(i)
// 	}
// 	wg.Wait()
// 	elapsed := time.Since(start) / 1e9
// 	fmt.Printf("\n\n%d seconds", elapsed)
// }
// func main() {
// 	for i := 21; i < 120; i++ {
// 		address := fmt.Sprintf("20.194.168.28:%d", i)
// 		conn, err := net.Dial("tcp", address)
// 		if err != nil {
// 			fmt.Printf("%s failed 關閉了\n", address)
// 			continue
// 		}
// 		conn.Close()
// 		fmt.Printf("%s connected 打開了！??！\n", address)
// 	}
// }

到此這篇關于Go語言（Golang）編寫 TCP 端口掃描器的文章就介紹到這了,更多相關Go語言TCP 端口掃描器內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: