Rust多線程Web服務器搭建過程
更新時間：2023年04月26日 09:35:50 作者：QIAOPENGJUN
這篇文章主要介紹了Rust多線程 Web 服務器搭建過程,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
最后的項目：多線程 Web 服務器
構建多線程 Web 服務器
- 在 socket 上監聽 TCP 連接
- 解析少量的 HTTP 請求
- 創建一個合適的 HTTP 響應
- 使用線程池改進服務器的吞吐量
- 優雅的停機和清理
- 注意：并不是最佳實踐
創建項目
~/rust
? cargo new hello
Created binary (application) `hello` package
~/rust
?main.rs 文件
use std::net::TcpListener;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
println!("Connection established!");
}
}修改一：
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
println!("Request: {}", String::from_utf8_lossy(&buffer[..]));
}修改二：
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
// 請求
// Method Request-URI HTTP-Version CRLF
// headers CRLF
// message-body
// 響應
// HTTP-Version Status-Code Reason-Phrase CRLF
// headers CRLF
// message-body
let response = "HTTP/1.1 200 OK\r\n\r\n";
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
println!("Request: {}", String::from_utf8_lossy(&buffer[..]));
}
修改三：
use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
// 請求
// Method Request-URI HTTP-Version CRLF
// headers CRLF
// message-body
// 響應
// HTTP-Version Status-Code Reason-Phrase CRLF
// headers CRLF
// message-body
let contents = fs::read_to_string("hello.html").unwrap();
let response = format!("HTTP/1.1 200 OK\r\n\r\n{}", contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
修改四：
use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
let get = b"GET / HTTP/1.1\r\n";
if buffer.starts_with(get) {
let contents = fs::read_to_string("hello.html").unwrap();
let response = format!("HTTP/1.1 200 OK\r\n\r\n{}", contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
} else {
let status_line = "HTTP/1.1 404 NOT FOUND\r\n\r\n";
let contents = fs::read_to_string("404.html").unwrap();
let response = format!("{}{}", status_line, contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
}
修改五：
use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
let get = b"GET / HTTP/1.1\r\n";
let (status_line, filename) = if buffer.starts_with(get) {
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else {
("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
};
let contents = fs::read_to_string(filename).unwrap();
let response = format!("{}{}", status_line, contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
hello.html 文件
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>Hello</title>
</head>
<body>
<h1>Hello</h1>
<p>Hi from Rust</p>
</body>
</html>404.html 文件
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>Hello!</title>
</head>
<body>
<h1>Oops!</h1>
<p>Sorry, I don't know what you're asking for.</p>
</body>
</html>單線程Web服務器
use std::fs;
use std::thread;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::time::Duration;
fn main() {
let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
handle_connection(stream);
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
let get = b"GET / HTTP/1.1\r\n";
let sleep = b"GET /sleep HTTP/1.1\r\n";
let (status_line, filename) = if buffer.starts_with(get) {
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else if buffer.starts_with(sleep) {
thread::sleep(Duration::from_secs(5));
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else {
("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
};
let contents = fs::read_to_string(filename).unwrap();
let response = format!("{}{}", status_line, contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
開啟線程
use std::fs;
use std::thread;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::time::Duration;
fn main() {
let listener = TcpListener::bind("localhost:7878").unwrap();
for stream in listener.incoming() {
let stream = stream.unwrap();
thread::spawn(|| {
handle_connection(stream);
});
}
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
let get = b"GET / HTTP/1.1\r\n";
let sleep = b"GET /sleep HTTP/1.1\r\n";
let (status_line, filename) = if buffer.starts_with(get) {
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else if buffer.starts_with(sleep) {
thread::sleep(Duration::from_secs(5));
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else {
("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
};
let contents = fs::read_to_string(filename).unwrap();
let response = format!("{}{}", status_line, contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
lib.rs 文件
use std::thread;
pub struct ThreadPool {
threads: Vec<thread::JoinHandle<()>>,
}
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let mut threads = Vec::with_capacity(size);
for _ in 0..size {
// create some threads and store them in the vector
}
ThreadPool { threads }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
}
}
lib.rs 修改一
use std::thread;
pub struct ThreadPool {
workers: Vec<Worker>,
}
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id));
}
ThreadPool { workers }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
impl Worker {
fn new(id: usize) -> Worker {
let thread = thread::spawn(|| {});
Worker { id, thread }
}
}
lib.rs 修改二
use std::thread;
use std::sync::mpsc;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
struct Job;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, receiver));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
impl Worker {
fn new(id: usize, receiver: mpsc::Receiver<Job>) -> Worker {
let thread = thread::spawn(|| {
receiver;
});
Worker { id, thread }
}
}
lib.rs 修改三
use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
struct Job;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(|| {
receiver;
});
Worker { id, thread }
}
}
lib.rs 修改四
use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
// struct Job;
type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(job).unwrap();
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(move || loop {
let job = receiver.lock().unwrap().recv().unwrap();
println!("Worker {} got a job; executing.", id);
(*job)();
});
Worker { id, thread }
}
}
lib.rs 修改五
use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(job).unwrap();
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
trait FnBox {
fn call_box(self: Box<Self>);
}
impl<F: FnOnce()> FnBox for F {
fn call_box(self: Box<F>) {
(*self)()
}
}
type Job = Box<dyn FnBox + Send + 'static>;
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(move || loop {
let job = receiver.lock().unwrap().recv().unwrap();
println!("Worker {} got a job; executing.", id);
// (*job)();
job.call_box();
});
Worker { id, thread }
}
}
lib.rs 修改六
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(job).unwrap();
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
trait FnBox {
fn call_box(self: Box<Self>);
}
impl<F: FnOnce()> FnBox for F {
fn call_box(self: Box<F>) {
(*self)()
}
}
type Job = Box<dyn FnBox + Send + 'static>;
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(move || loop {
while let Ok(job) = receiver.lock().unwrap().recv() {
println!("Worker {} got a job; executing.", id);
job.call_box();
}
});
Worker { id, thread }
}
}
優雅的停機和清理
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(job).unwrap();
}
}
impl Drop for ThreadPool {
fn drop(&mut self) {
for worker in &mut self.workers {
println!("Shutting down worker {}", worker.id);
worker.thread.join().unwrap()
}
}
}
struct Worker {
id: usize,
thread: thread::JoinHandle<()>,
}
trait FnBox {
fn call_box(self: Box<Self>);
}
impl<F: FnOnce()> FnBox for F {
fn call_box(self: Box<F>) {
(*self)()
}
}
type Job = Box<dyn FnBox + Send + 'static>;
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(move || loop {
while let Ok(job) = receiver.lock().unwrap().recv() {
println!("Worker {} got a job; executing.", id);
job.call_box();
}
});
Worker { id, thread }
}
}
修改優化一：
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Job>,
}
// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(job).unwrap();
}
}
impl Drop for ThreadPool {
fn drop(&mut self) {
for worker in &mut self.workers {
println!("Shutting down worker {}", worker.id);
if let Some(thread) = worker.thread.take() {
thread.join().unwrap();
}
}
}
}
struct Worker {
id: usize,
thread: Option<thread::JoinHandle<()>>,
}
trait FnBox {
fn call_box(self: Box<Self>);
}
impl<F: FnOnce()> FnBox for F {
fn call_box(self: Box<F>) {
(*self)()
}
}
type Job = Box<dyn FnBox + Send + 'static>;
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
let thread = thread::spawn(move || loop {
while let Ok(job) = receiver.lock().unwrap().recv() {
println!("Worker {} got a job; executing.", id);
job.call_box();
}
});
Worker {
id,
thread: Some(thread),
}
}
}
最終版 lib.rs 文件
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;
enum Message {
NewJob(Job),
Terminate,
}
pub struct ThreadPool {
workers: Vec<Worker>,
sender: mpsc::Sender<Message>,
}
// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
/// Creates a new ThreadPool.
///
/// The size is the number of threads in the pool.
///
/// # Panics
///
/// The `new` function will panic if the size is zero.
pub fn new(size: usize) -> ThreadPool {
assert!(size > 0);
let (sender, receiver) = mpsc::channel();
let receiver = Arc::new(Mutex::new(receiver));
let mut workers = Vec::with_capacity(size);
for id in 0..size {
workers.push(Worker::new(id, Arc::clone(&receiver)));
}
ThreadPool { workers, sender }
}
pub fn execute<F>(&self, f: F)
where
F: FnOnce() + Send + 'static,
{
let job = Box::new(f);
self.sender.send(Message::NewJob(job)).unwrap();
}
}
impl Drop for ThreadPool {
fn drop(&mut self) {
println!("Sending terminate message to all workers.");
for _ in &mut self.workers {
self.sender.send(Message::Terminate).unwrap();
}
println!("Shutting down all workers.");
for worker in &mut self.workers {
println!("Shutting down worker {}", worker.id);
if let Some(thread) = worker.thread.take() {
thread.join().unwrap();
}
}
}
}
struct Worker {
id: usize,
thread: Option<thread::JoinHandle<()>>,
}
trait FnBox {
fn call_box(self: Box<Self>);
}
impl<F: FnOnce()> FnBox for F {
fn call_box(self: Box<F>) {
(*self)()
}
}
type Job = Box<dyn FnBox + Send + 'static>;
impl Worker {
fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Message>>>) -> Worker {
let thread = thread::spawn(move || loop {
let message = receiver.lock().unwrap().recv().unwrap();
match message {
Message::NewJob(job) => {
println!("Worker {} got a job; executing.", id);
job.call_box();
}
Message::Terminate => {
println!("Worker {} got a job; executing.", id);
break;
}
}
});
Worker {
id,
thread: Some(thread),
}
}
}
最終版 main.rs 文件
use hello::ThreadPool;
use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::thread;
use std::time::Duration;
fn main() {
let listener = TcpListener::bind("localhost:7878").unwrap();
let pool = ThreadPool::new(4);
for stream in listener.incoming().take(2) {
let stream = stream.unwrap();
pool.execute(|| {
handle_connection(stream);
});
}
println!("Shutting down.");
}
fn handle_connection(mut stream: TcpStream) {
let mut buffer = [0; 512];
stream.read(&mut buffer).unwrap();
let get = b"GET / HTTP/1.1\r\n";
let sleep = b"GET /sleep HTTP/1.1\r\n";
let (status_line, filename) = if buffer.starts_with(get) {
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else if buffer.starts_with(sleep) {
thread::sleep(Duration::from_secs(5));
("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
} else {
("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
};
let contents = fs::read_to_string(filename).unwrap();
let response = format!("{}{}", status_line, contents);
stream.write(response.as_bytes()).unwrap();
stream.flush().unwrap();
}
運行
hello on master [?] is ?? 0.1.0 via ?? 1.67.1
? cargo run
Compiling hello v0.1.0 (/Users/qiaopengjun/rust/hello)
Finished dev [unoptimized + debuginfo] target(s) in 0.43s
Running `target/debug/hello`
Worker 0 got a job; executing.
Shutting down.
Sending terminate message to all workers.
Shutting down all workers.
Shutting down worker 0
Worker 1 got a job; executing.
Worker 2 got a job; executing.
Worker 3 got a job; executing.
Worker 1 got a job; executing.
Worker 0 got a job; executing.
Shutting down worker 1
Shutting down worker 2
Shutting down worker 3
hello on master [?] is ?? 0.1.0 via ?? 1.67.1 took 21.9s
? 到此這篇關于Rust多線程 Web 服務器搭建過程的文章就介紹到這了,更多相關rust多線程 Web 服務器內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Elasticsearch是基于Lucene構建的開源分布式搜索和分析引擎,支持水平擴展和多語言調用,ELK（Elastic Stack）組合包括Elasticsearch、Kibana、Logstash和Beats,專注于日志數據分析和實時監控,本文介紹Rust整合Elasticsearch的過程,一起看看吧2024-11-11
本文介紹了在Rust中使用向量存儲值列表的方法,包括創建、更新、讀取、遍歷、存儲多種類型以及內存釋放等方面,向量是Rust中常用且強大的集合類型,熟練掌握其用法有助于編寫高效且安全的代碼2025-02-02
關聯類型是定義通用trait的一種機制。它允許在trait中定義一個或多個占位符類型，這些類型將在trait的實現中具體化。文中有詳細示例代碼供參考，需要的朋友可以閱讀一下2023-05-05
Rust?標準庫中的?Mutex?結構體位于?std::sync::Mutex?中,它提供了線程安全的數據訪問,Mutex?保證了在同一時間只有一個線程可以訪問被鎖定的數據,這篇文章主要介紹了Rust?中?Mutex?的基本用法,需要的朋友可以參考下2024-05-05
Result<T, E> 類型可以方便地用于錯誤傳導,Result<T, E>是模板類型,實例化后可以是各種類型,但 Rust 要求傳導的 Result 中的 E 是相同類型的,所以我們需要編寫自己的 Error 類型,本文給大家介紹了在Rust中編寫自定義Error的詳細代碼,需要的朋友可以參考下2024-01-01
這篇文章主要介紹了Rust語言的println!宏的格式占位符,這只是格式說明符的一部分清單,Rust?的格式化系統非常靈活和強大,支持更多的選項和組合,需要的朋友可以參考下2024-03-03
Rust 連接 SQLite 數據庫的過程解析
本文通過一個例子給大家介紹了Rust 連接 SQLite 數據庫的詳細過程，我使用rusqlite這個crate，對Rust 連接 SQLite 數據庫相關知識感興趣的朋友跟隨小編一起看看吧2022-01-01
數據庫在編程中是一個很重要的環節,本文主要介紹了Rust使用Sqlx連接Mysql的實現,記錄rust如何操作數據庫并以mysql為主的做簡單的使用說明,感興趣的可以了解一下2024-03-03
image-rs庫是?Rust?社區中廣泛使用的一個開源庫,它提供了豐富的圖像編解碼功能,本文主要介紹了Rust語言實現圖像編碼轉換,具有一定的參考價值,感興趣的可以了解一下2024-05-05
這篇文章主要介紹了RustDesk?搭建一個自己的遠程桌面中繼服務器,主要包括服務端安裝和客戶端配置方法，配置好相關操作輸入控制碼即可發起遠程或文件傳輸，本文通過圖文給大家講解的非常詳細，需要的朋友可以參考下2022-08-08