快捷導航

不支持fsockopen但支持culr環境下下ucenter與modoer通訊問題

更新時間：2011年08月12日 16:20:30 作者：

網站上線，modoer與ucenter 下不能通訊折騰了我差不多二天，開始都以為自己的配置出問題，移植了平臺后就不能通訊了，修改了幾次配置，都沒有成功

所以就懷疑是否編碼問題，或者文件權限問題，或者是不是函數不支持問題，經過排查發現原來是萬網的L1主機不支持fsockopen，在文件uc_client/client.php中的uc_fopen中出現了問題，這里的代碼是這樣：

復制代碼代碼如下:

 
function uc_fopen($url, $limit = 0, $post = '', $cookie = '', $bysocket = FALSE, $ip = '', $timeout = 15, $block = TRUE) { 
$return = ''; 
$matches = parse_url($url); 
!isset($matches['host']) && $matches['host'] = ''; 
!isset($matches['path']) && $matches['path'] = ''; 
!isset($matches['query']) && $matches['query'] = ''; 
!isset($matches['port']) && $matches['port'] = ''; 
$host = $matches['host']; 
$path = $matches['path'] ? $matches['path'].($matches['query'] ? '?'.$matches['query'] : '') : '/'; 
$port = !empty($matches['port']) ? $matches['port'] : 80; 
if($post) { 
$out = "POST $path HTTP/1.0\r\n"; 
$out .= "Accept: */*\r\n"; 
//$out .= "Referer: $boardurl\r\n"; 
$out .= "Accept-Language: zh-cn\r\n"; 
$out .= "Content-Type: application/x-www-form-urlencoded\r\n"; 
$out .= "User-Agent: $_SERVER[HTTP_USER_AGENT]\r\n"; 
$out .= "Host: $host\r\n"; 
$out .= 'Content-Length: '.strlen($post)."\r\n"; 
$out .= "Connection: Close\r\n"; 
$out .= "Cache-Control: no-cache\r\n"; 
$out .= "Cookie: $cookie\r\n\r\n"; 
$out .= $post; 
} else { 
$out = "GET $path HTTP/1.0\r\n"; 
$out .= "Accept: */*\r\n"; 
//$out .= "Referer: $boardurl\r\n"; 
$out .= "Accept-Language: zh-cn\r\n"; 
$out .= "User-Agent: $_SERVER[HTTP_USER_AGENT]\r\n"; 
$out .= "Host: $host\r\n"; 
$out .= "Connection: Close\r\n"; 
$out .= "Cookie: $cookie\r\n\r\n"; 
} 
$fp = @fsockopen(($ip ? $ip : $host), $port, $errno, $errstr, $timeout); 
if(!$fp) { 
return '';//note $errstr : $errno \r\n 
} else { 
stream_set_blocking($fp, $block); 
stream_set_timeout($fp, $timeout); 
@fwrite($fp, $out); 
$status = stream_get_meta_data($fp); 
if(!$status['timed_out']) { 
while (!feof($fp)) { 
if(($header = @fgets($fp)) && ($header == "\r\n" || $header == "\n")) { 
break; 
} 
} 
$stop = false; 
while(!feof($fp) && !$stop) { 
$data = fread($fp, ($limit == 0 || $limit > 8192 ? 8192 : $limit)); 
$return .= $data; 
if($limit) { 
$limit -= strlen($data); 
$stop = $limit <= 0; 
} 
} 
} 
@fclose($fp); 
return $return; 
} 
} 

fsockopen函數不能使用，因些就只能靠其它方法了，幸虧支持curl，file_get_contents也支持，經考慮就用curl吧，修改了uc_fopen函數，如下;

復制代碼代碼如下:

 
function uc_fopen($url, $limit = 0, $post = '', $cookie = '', $bysocket = FALSE, $ip = '', $timeout = 15, $block = TRUE) { 
$return = ''; 
$curl = curl_init(); 
curl_setopt($curl, CURLOPT_URL, $url); 
curl_setopt($curl, CURLOPT_USERAGENT, $_SERVER['HTTP_USER_AGENT']); 
if($post) { 
curl_setopt($curl, CURLOPT_POST, 1); 
curl_setopt($curl, CURLOPT_POSTFIELDS, $post); 
} 
if($cookie) { 
curl_setopt($curl, CURLOPT_COOKIE, $cookie); 
} 
curl_setopt($curl, CURLOPT_TIMEOUT, $timeout); 
curl_setopt($curl, CURLOPT_HEADER, 0); 
curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1); 
$return = curl_exec($curl); 
if (curl_errno($curl)) { 
echo '<pre><b>錯誤:</b><br />'.curl_error($curl); 
} 
curl_close($curl); 
return $return; 
} 

于是modoer下的uc_client/client.php和uchome下的uc_cilent/client.php，就這樣修改了uc_open函數，呵呵，第一次使用curl，網上的資料還是好多的，所以也沒有什么阻礙，不過就不知這個修改會不會影響其它的東西，還有待測試羅。。。。

您可能感興趣的文章: