func New(out io.Writer, prefix string, flag int) *Logger {
   l := &Logger{out: out, prefix: prefix, flag: flag}
   if out == io.Discard {
      l.isDiscard = 1
   }
   return l
}

var l *log.Logger
func main() {
	l.Printf("main method exec fail, err: %v", errors.New("nil Pointer error"))
	l.Println("test go log status")
	l.Fatal("wait five seconds")
	time.Sleep(time.Second * 5)
	l.Println("five seconds after!")
}
func init() {
	l = log.New(os.Stdout, "[我是一個前綴]", log.LstdFlags)
}

// Fatal is equivalent to l.Print() followed by a call to os.Exit(1).
func (l *Logger) Fatal(v ...any) {
   l.Output(2, fmt.Sprint(v...))
   os.Exit(1)
}

// NewProductionEncoderConfig returns an opinionated EncoderConfig for
// production environments.
func NewProductionEncoderConfig() zapcore.EncoderConfig {
   return zapcore.EncoderConfig{
       // 設置log內容里的一些屬性的key
      TimeKey:        "ts",//時間對應的key名
      LevelKey:       "level",//日志級別對應的key名
      NameKey:        "logger",//logger名對應的key名
      CallerKey:      "caller",//調用者對應的key名
      FunctionKey:    zapcore.OmitKey,
      MessageKey:     "msg",//日志內容對應的key名，此參數必須不為空，否則日志主體不處理
      StacktraceKey:  "stacktrace",//棧追蹤的key名
       // const DefaultLineEnding = "\n" 行末輸出格式
      LineEnding:     zapcore.DefaultLineEnding,
       // 日志編碼級別
      EncodeLevel:    zapcore.LowercaseLevelEncoder,
       // 日志時間解析
      EncodeTime:     zapcore.EpochTimeEncoder,
       // 日志日期解析
      EncodeDuration: zapcore.SecondsDurationEncoder,
       // 日志調用路徑
      EncodeCaller:   zapcore.ShortCallerEncoder,
   }
}

// A LevelEncoder serializes a Level to a primitive type.
type LevelEncoder func(Level, PrimitiveArrayEncoder)
// 將日志級別進行大寫并帶上顏色
func CapitalColorLevelEncoder(l Level, enc PrimitiveArrayEncoder)
// 將日志級別大寫不帶顏色
func CapitalLevelEncoder(l Level, enc PrimitiveArrayEncoder)
// 將日志級別小寫帶上顏色
func LowercaseColorLevelEncoder(l Level, enc PrimitiveArrayEncoder)
// 將日志級別小寫不帶顏色
func LowercaseLevelEncoder(l Level, enc PrimitiveArrayEncoder)

// A TimeEncoder serializes a time.Time to a primitive type.
type TimeEncoder func(time.Time, PrimitiveArrayEncoder)
// 根據不同時間進行格式化
func EpochTimeEncoder(t time.Time, enc PrimitiveArrayEncoder)
func EpochMillisTimeEncoder(t time.Time, enc PrimitiveArrayEncoder)
func EpochNanosTimeEncoder(t time.Time, enc PrimitiveArrayEncoder)

// A DurationEncoder serializes a time.Duration to a primitive type.
type DurationEncoder func(time.Duration, PrimitiveArrayEncoder)
// 將日期根據不同時間進行格式化
func SecondsDurationEncoder(d time.Duration, enc PrimitiveArrayEncoder)
func NanosDurationEncoder(d time.Duration, enc PrimitiveArrayEncoder)
func MillisDurationEncoder(d time.Duration, enc PrimitiveArrayEncoder)
func StringDurationEncoder(d time.Duration, enc PrimitiveArrayEncoder)

encoderConfig := zap.NewProductionEncoderConfig()
// 打印級別為大寫 & 彩色
encoderConfig.EncodeLevel = zapcore.CapitalColorLevelEncoder
// 時間編碼進行指定格式解析 layout -> "[2006-01-02 15:04:05]"
encoderConfig.EncodeTime = parseTime(settings.Conf.Layout)

// parseTime 進行時間格式處理
func parseTime(layout string) zapcore.TimeEncoder {
   return func(t time.Time, enc zapcore.PrimitiveArrayEncoder) {
      type appendTimeEncoder interface {
         AppendTimeLayout(time.Time, string)
      }
      if enc, ok := enc.(appendTimeEncoder); ok {
         enc.AppendTimeLayout(t, layout)
         return
      }
      enc.AppendString(t.Format(layout))
   }
}

// 日志輸出配置, 借助另外一個庫 lumberjack 協助完成日志切割。
lumberjackLogger := &lumberjack.Logger{
   Filename:   settings.Conf.Filename,   // -- 日志文件名
   MaxSize:    settings.Conf.MaxSize,    // -- 最大日志數 M為單位!!!
   MaxAge:     settings.Conf.MaxAge,     // -- 最大存在天數
   MaxBackups: settings.Conf.MaxBackups, // -- 最大備份數量
   Compress:   false,                    // --是否壓縮
}
syncer := zapcore.AddSync(lumberjackLogger)

// -- 用于開發者模式和生產模式之間的切換
var core zapcore.Core
if settings.Conf.AppConfig.Mode == "debug" {
   encoder := zapcore.NewConsoleEncoder(encoderConfig) // 輸出控制臺編碼格式
   core = zapcore.NewTee(
      zapcore.NewCore(encoder, syncer, zapcore.DebugLevel), // debug級別打印到日志文件
      zapcore.NewCore(encoder, zapcore.Lock(os.Stdout), zapcore.DebugLevel), // debug級別打印到控制臺
   )
} else {
   encoder := zapcore.NewJSONEncoder(encoderConfig)// 輸出Json格式，便于日志檢索
   core = zapcore.NewCore(encoder, syncer, zapcore.InfoLevel)// info級別打印到日志文件
}
lg := zap.New(core, zap.AddCaller()) // --添加函數調用信息

zap.ReplaceGlobals(lg)               // 替換該日志為全局日志
var (
	_globalMu sync.RWMutex
	_globalL  = NewNop()
)
// L returns the global Logger, which can be reconfigured with ReplaceGlobals.
// It's safe for concurrent use.
func L() *Logger {
	_globalMu.RLock()
	l := _globalL
	_globalMu.RUnlock()
	return l
}

// init 初始化日志庫
func init() {
   encoderConfig := zap.NewProductionEncoderConfig()
   // 打印級別為大寫 & 彩色
   encoderConfig.EncodeLevel = zapcore.CapitalColorLevelEncoder
   // 時間編碼進行指定格式解析
   encoderConfig.EncodeTime = parseTime(settings.Conf.Layout)
   // 日志輸出配置, 借助另外一個庫 lumberjack 協助完成日志切割。
   lumberjackLogger := &lumberjack.Logger{
      Filename:   settings.Conf.Filename,   // -- 日志文件名
      MaxSize:    settings.Conf.MaxSize,    // -- 最大日志數 M為單位!!!
      MaxAge:     settings.Conf.MaxAge,     // -- 最大存在天數
      MaxBackups: settings.Conf.MaxBackups, // -- 最大備份數量
      Compress:   false,                    // --是否壓縮
   }
   syncer := zapcore.AddSync(lumberjackLogger)
   // -- 用于開發者模式和生產模式之間的切換
   var core zapcore.Core
   if settings.Conf.AppConfig.Mode == "debug" {
      encoder := zapcore.NewConsoleEncoder(encoderConfig)
      core = zapcore.NewTee(
         zapcore.NewCore(encoder, syncer, zapcore.DebugLevel),
         zapcore.NewCore(encoder, zapcore.Lock(os.Stdout), zapcore.DebugLevel),
      )
   } else {
      encoder := zapcore.NewJSONEncoder(encoderConfig)
      core = zapcore.NewCore(encoder, syncer, zapcore.InfoLevel)
   }
   lg := zap.New(core, zap.AddCaller()) // --添加函數調用信息
   zap.ReplaceGlobals(lg)               // 替換該日志為全局日志
}
// parseTime 進行時間格式處理
func parseTime(layout string) zapcore.TimeEncoder {
   return func(t time.Time, enc zapcore.PrimitiveArrayEncoder) {
      type appendTimeEncoder interface {
         AppendTimeLayout(time.Time, string)
      }
      if enc, ok := enc.(appendTimeEncoder); ok {
         enc.AppendTimeLayout(t, layout)
         return
      }
      enc.AppendString(t.Format(layout))
   }
}

zap.L().Info("test info", zap.String("test String", "ok"), zap.Int("test cnt", 1))
zap.L().Debug("test debug", zap.String("test String", "ok"), zap.Int("test cnt", 2))
zap.L().Error("test error", zap.String("test String", "ok"), zap.Int("test cnt", 3))

// GinLogger 替換gin中默認的logger
func GinLogger() gin.HandlerFunc {
	return func(c *gin.Context) {
		start := time.Now()
		path := c.Request.URL.Path
		query := c.Request.URL.RawQuery
		c.Next()
	cost := time.Since(start)
	if c.Writer.Status() != http.StatusOK {
		// 記錄異常信息
		zap.L().Error(query,
			zap.Int("status", c.Writer.Status()),
			zap.String("method", c.Request.Method),
			zap.String("path", path),
			zap.String("ip", c.ClientIP()),
			zap.String("user-agent", c.Request.UserAgent()),
			zap.String("errors", c.Errors.ByType(gin.ErrorTypePrivate).String()),
			zap.Duration("cost", cost),
		)
	}
}

// GinRecovery recover掉項目可能出現的panic
func GinRecovery(stack bool) gin.HandlerFunc {
	return func(c *gin.Context) {
		defer func() {
			if err := recover(); err != nil {
				// Check for a broken connection, as it is not really a
				// condition that warrants a panic stack trace.
				var brokenPipe bool
				if ne, ok := err.(*net.OpError); ok {
					if se, ok := ne.Err.(*os.SyscallError); ok {
						if strings.Contains(strings.ToLower(se.Error()), "broken pipe") ||
							strings.Contains(strings.ToLower(se.Error()), "connection reset by peer") {
							brokenPipe = true
						}
					}
				}
				httpRequest, _ := httputil.DumpRequest(c.Request, false)
				if brokenPipe {
					zap.L().Error(c.Request.URL.Path,
						zap.Any("error", err),
						zap.String("httpRequest", string(httpRequest)),
					)
					// If the connection is dead, we can't write a status to it.
					c.Error(err.(error)) // nolint: errcheck
					c.Abort()
					return
				}
                // 這里可以選擇全部打印出來不必要分割然后循環輸出
				request := strings.Split(string(httpRequest), "\r\n")
				split := strings.Split(string(debug.Stack()), "\n\t")
				if stack {
					zap.L().Error("[Recovery from panic]",
						zap.Any("error", err))
					for _, str := range request {
						zap.L().Error("[Recovery from request panic]", zap.String("request", str))
					}
					for _, str := range split {
						zap.L().Error("[Recovery from Stack panic]", zap.String("stack", str))
					}
				} else {
					zap.L().Error("[Recovery from panic]",
						zap.Any("error", err))
					for _, str := range request {
						zap.L().Error("[Recovery from request panic]", zap.String("request", str))
					}
				}
				c.AbortWithStatus(http.StatusInternalServerError)
			}
		}()
		c.Next()
	}
}