基于Golang實現Redis協議解析器

更新時間：2023年03月24日 11:08:19 作者：CSGOPHER

這篇文章主要為大家詳細介紹了如何通過GO語言編寫簡單的Redis協議解析器，文中的示例代碼講解詳細，對我們深入了解Go語言有一定的幫助，需要的可以參考一下

本文實現Redis的協議層，協議層負責解析指令，然后將指令交給核心database執行

echo database用來測試協議層的代碼

https://github.com/csgopher/go-redis

RESP協議

RESP是客戶端與服務端通信的協議，格式有五種：

正?；貜?fù)：以“+”開頭，以“\r\n”結尾的字符串形式

錯誤回復：以“-”開頭，以“\r\n”結尾的字符串形式

整數：以“:”開頭，以“\r\n”結尾的字符串形式

多行字符串：以“$”開頭，后跟實際發送字節數，再以“\r\n”開頭和結尾

$3\r\nabc\r\n

數組：以“*”開頭，后跟成員個數

SET key value
*3\r\n$3\r\nSET\r\n$3\r\nkey\r\n$5\r\nvalue\r\n

客戶端和服務器發送的命令或數據一律以 \r\n （CRLF）作為換行符。

當我們輸入*3\r\n$3\r\nSET\r\n$3\r\nkey\r\n$5\r\nvalue\r\n這樣一串命令，服務端接收到的是如下的命令：
*3\r\n
$3\r\n
SET\r\n
$3\r\n
key\r\n
$5\r\n
value\r\n

interface/resp/conn.go

type Connection interface {
   Write([]byte) error
   GetDBIndex() int
   SelectDB(int)
}

interface/resp/reply.go
type Reply interface {
	ToBytes() []byte
}

Connection接口：Redis客戶端的一個連接
Write：給客戶端回復消息
GetDBIndex：Redis有16個DB
Reply接口：響應接口

resp/reply/consts.go

type PongReply struct{}

var pongBytes = []byte("+PONG\r\n")

func (r *PongReply) ToBytes() []byte {
    return pongBytes
}

var thePongReply = new(PongReply)

func MakePongReply() *PongReply {
    return thePongReply
}

type OkReply struct{}

var okBytes = []byte("+OK\r\n")

func (r *OkReply) ToBytes() []byte {
    return okBytes
}

var theOkReply = new(OkReply)

func MakeOkReply() *OkReply {
    return theOkReply
}

var nullBulkBytes = []byte("$-1\r\n")

type NullBulkReply struct{}

func (r *NullBulkReply) ToBytes() []byte {
    return nullBulkBytes
}

func MakeNullBulkReply() *NullBulkReply {
    return &NullBulkReply{}
}

var emptyMultiBulkBytes = []byte("*0\r\n")

type EmptyMultiBulkReply struct{}

func (r *EmptyMultiBulkReply) ToBytes() []byte {
    return emptyMultiBulkBytes
}

type NoReply struct{}

var noBytes = []byte("")

func (r *NoReply) ToBytes() []byte {
    return noBytes
}

定義五種回復：回復pong，ok，null，空數組，空

resp/reply/reply.go

type ErrorReply interface {
   Error() string
   ToBytes() []byte
}

ErrorReply：定義錯誤接口

resp/reply/errors.go

type UnknownErrReply struct{}

var unknownErrBytes = []byte("-Err unknown\r\n")

func (r *UnknownErrReply) ToBytes() []byte {
   return unknownErrBytes
}

func (r *UnknownErrReply) Error() string {
   return "Err unknown"
}

type ArgNumErrReply struct {
   Cmd string
}

func (r *ArgNumErrReply) ToBytes() []byte {
   return []byte("-ERR wrong number of arguments for '" + r.Cmd + "' command\r\n")
}

func (r *ArgNumErrReply) Error() string {
   return "ERR wrong number of arguments for '" + r.Cmd + "' command"
}

func MakeArgNumErrReply(cmd string) *ArgNumErrReply {
   return &ArgNumErrReply{
      Cmd: cmd,
   }
}

type SyntaxErrReply struct{}

var syntaxErrBytes = []byte("-Err syntax error\r\n")
var theSyntaxErrReply = &SyntaxErrReply{}

func MakeSyntaxErrReply() *SyntaxErrReply {
   return theSyntaxErrReply
}

func (r *SyntaxErrReply) ToBytes() []byte {
   return syntaxErrBytes
}

func (r *SyntaxErrReply) Error() string {
   return "Err syntax error"
}

type WrongTypeErrReply struct{}

var wrongTypeErrBytes = []byte("-WRONGTYPE Operation against a key holding the wrong kind of value\r\n")

func (r *WrongTypeErrReply) ToBytes() []byte {
   return wrongTypeErrBytes
}

func (r *WrongTypeErrReply) Error() string {
   return "WRONGTYPE Operation against a key holding the wrong kind of value"
}

type ProtocolErrReply struct {
   Msg string
}

func (r *ProtocolErrReply) ToBytes() []byte {
   return []byte("-ERR Protocol error: '" + r.Msg + "'\r\n")
}

func (r *ProtocolErrReply) Error() string {
   return "ERR Protocol error: '" + r.Msg
}

errors定義5種錯誤：UnknownErrReply 未知錯誤，ArgNumErrReply 參數個數錯誤，SyntaxErrReply 語法錯誤，WrongTypeErrReply 數據類型錯誤，ProtocolErrReply 協議錯誤

resp/reply/reply.go

var (
   nullBulkReplyBytes = []byte("$-1")
   // 協議的結尾
   CRLF = "\r\n"
)

type BulkReply struct {
   Arg []byte
}

func MakeBulkReply(arg []byte) *BulkReply {
   return &BulkReply{
      Arg: arg,
   }
}

func (r *BulkReply) ToBytes() []byte {
   if len(r.Arg) == 0 {
      return nullBulkReplyBytes
   }
   return []byte("$" + strconv.Itoa(len(r.Arg)) + CRLF + string(r.Arg) + CRLF)
}

type MultiBulkReply struct {
   Args [][]byte
}

func (r *MultiBulkReply) ToBytes() []byte {
   argLen := len(r.Args)
   var buf bytes.Buffer
   buf.WriteString("*" + strconv.Itoa(argLen) + CRLF)
   for _, arg := range r.Args {
      if arg == nil {
         buf.WriteString("$-1" + CRLF)
      } else {
         buf.WriteString("$" + strconv.Itoa(len(arg)) + CRLF + string(arg) + CRLF)
      }
   }
   return buf.Bytes()
}

func MakeMultiBulkReply(args [][]byte) *MultiBulkReply {
   return &MultiBulkReply{
      Args: args,
   }
}

type StatusReply struct {
   Status string
}

func MakeStatusReply(status string) *StatusReply {
   return &StatusReply{
      Status: status,
   }
}

func (r *StatusReply) ToBytes() []byte {
   return []byte("+" + r.Status + CRLF)
}

type IntReply struct {
   Code int64
}

func MakeIntReply(code int64) *IntReply {
   return &IntReply{
      Code: code,
   }
}

func (r *IntReply) ToBytes() []byte {
   return []byte(":" + strconv.FormatInt(r.Code, 10) + CRLF)
}

type StandardErrReply struct {
   Status string
}

func (r *StandardErrReply) ToBytes() []byte {
   return []byte("-" + r.Status + CRLF)
}

func (r *StandardErrReply) Error() string {
   return r.Status
}

func MakeErrReply(status string) *StandardErrReply {
   return &StandardErrReply{
      Status: status,
   }
}

func IsErrorReply(reply resp.Reply) bool {
   return reply.ToBytes()[0] == '-'
}

BulkReply：回復一個字符串
MultiBulkReply：回復字符串?dāng)?shù)組
StatusReply：狀態回復
IntReply：數字回復
StandardErrReply：標準錯誤回復
IsErrorReply：判斷是否為錯誤回復
ToBytes：將字符串轉成RESP協議規定的格式

resp/parser/parser.go

type Payload struct {
   Data resp.Reply
   Err  error
}

type readState struct {
   readingMultiLine  bool     
   expectedArgsCount int     
   msgType           byte    
   args              [][]byte 
   bulkLen           int64    
}

func (s *readState) finished() bool {
   return s.expectedArgsCount > 0 && len(s.args) == s.expectedArgsCount
}

func ParseStream(reader io.Reader) <-chan *Payload {
   ch := make(chan *Payload)
   go parse0(reader, ch)
   return ch
}

func parse0(reader io.Reader, ch chan<- *Payload) {
	 ......
}

Payload結構體：客服端給我們發的數據

Reply：客戶端與服務端互相發的數據都稱為Reply

readState結構體：

readingMultiLine：解析單行還是多行數據
expectedArgsCount：應該讀取的參數個數
msgType：消息類型
args：消息內容
bulkLen：數據長度

finished方法：判斷解析是否完成

ParseStream方法：異步解析數據后放入管道，返回管道數據

func readLine(bufReader *bufio.Reader, state *readState) ([]byte, bool, error) {
   var msg []byte
   var err error
   if state.bulkLen == 0 {
      msg, err = bufReader.ReadBytes('\n')
      if err != nil {
         return nil, true, err
      }
      if len(msg) == 0 || msg[len(msg)-2] != '\r' {
         return nil, false, errors.New("protocol error: " + string(msg))
      }
   } else {
      msg = make([]byte, state.bulkLen+2)
      _, err = io.ReadFull(bufReader, msg)
      if err != nil {
         return nil, true, err
      }
      if len(msg) == 0 || msg[len(msg)-2] != '\r' || msg[len(msg)-1] != '\n' {
         return nil, false, errors.New("protocol error: " + string(msg))
      }
      state.bulkLen = 0
   }
   return msg, false, nil
}

readLine：一行一行的讀取。讀正常的行，以\n分隔。讀正文中包含\r\n字符的行時，state.bulkLen加上換行符\r\n（state.bulkLen+2）

func parseMultiBulkHeader(msg []byte, state *readState) error {
   var err error
   var expectedLine uint64
   expectedLine, err = strconv.ParseUint(string(msg[1:len(msg)-2]), 10, 32)
   if err != nil {
      return errors.New("protocol error: " + string(msg))
   }
   if expectedLine == 0 {
      state.expectedArgsCount = 0
      return nil
   } else if expectedLine > 0 {
      state.msgType = msg[0]
      state.readingMultiLine = true
      state.expectedArgsCount = int(expectedLine)
      state.args = make([][]byte, 0, expectedLine)
      return nil
   } else {
      return errors.New("protocol error: " + string(msg))
   }
}

func parseBulkHeader(msg []byte, state *readState) error {
   var err error
   state.bulkLen, err = strconv.ParseInt(string(msg[1:len(msg)-2]), 10, 64)
   if err != nil {
      return errors.New("protocol error: " + string(msg))
   }
   if state.bulkLen == -1 { // null bulk
      return nil
   } else if state.bulkLen > 0 {
      state.msgType = msg[0]
      state.readingMultiLine = true
      state.expectedArgsCount = 1
      state.args = make([][]byte, 0, 1)
      return nil
   } else {
      return errors.New("protocol error: " + string(msg))
   }
}

parseMultiBulkHeader：解析數組的頭部，設置期望的行數和相關參數。

parseBulkHeader：解析多行字符串的頭部。

func parseSingleLineReply(msg []byte) (resp.Reply, error) {
   str := strings.TrimSuffix(string(msg), "\r\n")
   var result resp.Reply
   switch msg[0] {
   case '+': // status reply
      result = reply.MakeStatusReply(str[1:])
   case '-': // err reply
      result = reply.MakeErrReply(str[1:])
   case ':': // int reply
      val, err := strconv.ParseInt(str[1:], 10, 64)
      if err != nil {
         return nil, errors.New("protocol error: " + string(msg))
      }
      result = reply.MakeIntReply(val)
   }
   return result, nil
}

func readBody(msg []byte, state *readState) error {
   line := msg[0 : len(msg)-2]
   var err error
   if line[0] == '$' {
      // bulk reply
      state.bulkLen, err = strconv.ParseInt(string(line[1:]), 10, 64)
      if err != nil {
         return errors.New("protocol error: " + string(msg))
      }
      if state.bulkLen <= 0 { // null bulk in multi bulks
         state.args = append(state.args, []byte{})
         state.bulkLen = 0
      }
   } else {
      state.args = append(state.args, line)
   }
   return nil
}

parseSingleLineReply：解析單行命令

readBody：讀取多行的命令，如果是$開頭，設置bulkLen，讀取下一行時根據這個+2，不是$開頭則直接添加到args

func parse0(reader io.Reader, ch chan<- *Payload) {
    defer func() {
       if err := recover(); err != nil {
          logger.Error(string(debug.Stack()))
      }
   }()
    bufReader := bufio.NewReader(reader)
    var state readState
    var err error
    var msg []byte
    for {
       var ioErr bool
       msg, ioErr, err = readLine(bufReader, &state)
       if err != nil {
          if ioErr {
             ch <- &Payload{
                Err: err,
            }
             close(ch)
             return
         }
          ch <- &Payload{
             Err: err,
         }
          state = readState{}
          continue
      }

       if !state.readingMultiLine {
          if msg[0] == '*' {
             // multi bulk reply
             err = parseMultiBulkHeader(msg, &state)
             if err != nil {
                ch <- &Payload{
                   Err: errors.New("protocol error: " + string(msg)),
               }
                state = readState{}
                continue
            }
             if state.expectedArgsCount == 0 {
                ch <- &Payload{
                   Data: &reply.EmptyMultiBulkReply{},
               }
                state = readState{}
                continue
            }
         } else if msg[0] == '$' { // bulk reply
             err = parseBulkHeader(msg, &state)
             if err != nil {
                ch <- &Payload{
                   Err: errors.New("protocol error: " + string(msg)),
               }
                state = readState{} // reset state
                continue
            }
             if state.bulkLen == -1 { // null bulk reply
                ch <- &Payload{
                   Data: &reply.NullBulkReply{},
               }
                state = readState{} // reset state
                continue
            }
         } else {
             // single line reply
             result, err := parseSingleLineReply(msg)
             ch <- &Payload{
                Data: result,
                Err:  err,
            }
             state = readState{} // reset state
             continue
         }
      } else {
          // read bulk reply
          err = readBody(msg, &state)
          if err != nil {
             ch <- &Payload{
                Err: errors.New("protocol error: " + string(msg)),
            }
             state = readState{} // reset state
             continue
         }
          // if sending finished
          if state.finished() {
             var result resp.Reply
             if state.msgType == '*' {
                result = reply.MakeMultiBulkReply(state.args)
            } else if state.msgType == '$' {
                result = reply.MakeBulkReply(state.args[0])
            }
             ch <- &Payload{
                Data: result,
                Err:  err,
            }
             state = readState{}
         }
      }
   }
}

parse0：解析指令，解析完成后通過channel發出去

resp/connection/conn.go

type Connection struct {
    conn net.Conn
    waitingReply wait.Wait
    mu sync.Mutex // 避免多個協程往客戶端中寫
    selectedDB int
}

func NewConn(conn net.Conn) *Connection {
    return &Connection{
        conn: conn,
    }
}

func (c *Connection) RemoteAddr() net.Addr {
    return c.conn.RemoteAddr()
}

func (c *Connection) Close() error {
    c.waitingReply.WaitWithTimeout(10 * time.Second)
    _ = c.conn.Close()
    return nil
}

func (c *Connection) Write(b []byte) error {
    if len(b) == 0 {
        return nil
    }
    c.mu.Lock()
    c.waitingReply.Add(1)
    defer func() {
        c.waitingReply.Done()
        c.mu.Unlock()
    }()

    _, err := c.conn.Write(b)
    return err
}

func (c *Connection) GetDBIndex() int {
    return c.selectedDB
}

func (c *Connection) SelectDB(dbNum int) {
    c.selectedDB = dbNum
}

之前寫的EchoHandler是用戶傳過來什么，我們傳回去什么?，F(xiàn)在要寫一個RespHandler來代替EchoHandler，讓解析器來解析。RespHandler中要有一個管理客戶端連接的結構體Connection。

Connection：客戶端連接，在協議層的handler中會用到

resp/handler/handler.go

var (
   unknownErrReplyBytes = []byte("-ERR unknown\r\n")
)

type RespHandler struct {
   activeConn sync.Map
   db         databaseface.Database
   closing    atomic.Boolean
}

func MakeHandler() *RespHandler {
   var db databaseface.Database
   db = database.NewEchoDatabase()
   return &RespHandler{
      db: db,
   }
}

func (h *RespHandler) closeClient(client *connection.Connection) {
   _ = client.Close()
   h.db.AfterClientClose(client)
   h.activeConn.Delete(client)
}

func (h *RespHandler) Handle(ctx context.Context, conn net.Conn) {
   if h.closing.Get() {
      // closing handler refuse new connection
      _ = conn.Close()
   }

   client := connection.NewConn(conn)
   h.activeConn.Store(client, 1)

   ch := parser.ParseStream(conn)
   for payload := range ch {
      if payload.Err != nil {
         if payload.Err == io.EOF ||
            payload.Err == io.ErrUnexpectedEOF ||
            strings.Contains(payload.Err.Error(), "use of closed network connection") {
            // connection closed
            h.closeClient(client)
            logger.Info("connection closed: " + client.RemoteAddr().String())
            return
         }
         // protocol err
         errReply := reply.MakeErrReply(payload.Err.Error())
         err := client.Write(errReply.ToBytes())
         if err != nil {
            h.closeClient(client)
            logger.Info("connection closed: " + client.RemoteAddr().String())
            return
         }
         continue
      }
      if payload.Data == nil {
         logger.Error("empty payload")
         continue
      }
      r, ok := payload.Data.(*reply.MultiBulkReply)
      if !ok {
         logger.Error("require multi bulk reply")
         continue
      }
      result := h.db.Exec(client, r.Args)
      if result != nil {
         _ = client.Write(result.ToBytes())
      } else {
         _ = client.Write(unknownErrReplyBytes)
      }
   }
}

func (h *RespHandler) Close() error {
   logger.Info("handler shutting down...")
   h.closing.Set(true)
   // TODO: concurrent wait
   h.activeConn.Range(func(key interface{}, val interface{}) bool {
      client := key.(*connection.Connection)
      _ = client.Close()
      return true
   })
   h.db.Close()
   return nil
}

RespHandler：和之前的echo類似，加了核心層的db.exec執行解析的指令

interface/database/database.go

type CmdLine = [][]byte

type Database interface {
	Exec(client resp.Connection, args [][]byte) resp.Reply
	AfterClientClose(c resp.Connection)
	Close()
}

type DataEntity struct {
	Data interface{}
}

Exec：核心層的執行

AfterClientClose：關閉之后的善后方法

CmdLine：二維字節數組的指令別名

DataEntity：表示Redis的數據，包括string, list, set等等

database/echo_database.go

type EchoDatabase struct {
}

func NewEchoDatabase() *EchoDatabase {
   return &EchoDatabase{}
}

func (e EchoDatabase) Exec(client resp.Connection, args [][]byte) resp.Reply {
   return reply.MakeMultiBulkReply(args)
}

func (e EchoDatabase) AfterClientClose(c resp.Connection) {
   logger.Info("EchoDatabase AfterClientClose")
}

func (e EchoDatabase) Close() {
   logger.Info("EchoDatabase Close")
}

echo_database：測試協議層

Exec：指令解析后，再使用MakeMultiBulkReply包裝一下返回去

main.go

err := tcp.ListenAndServeWithSignal(
   &tcp.Config{
      Address: fmt.Sprintf("%s:%d",
         config.Properties.Bind,
         config.Properties.Port),
   },
   handler.MakeHandler())
if err != nil {
   logger.Error(err)
}

main改成剛才寫的：handler.MakeHandler()

到此這篇關于基于Golang實現Redis協議解析器的文章就介紹到這了,更多相關Golang Redis協議解析器內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: