基于OpenCV實現動態畫矩形和多邊形并保存坐標
更新時間：2023年03月23日 10:30:21 作者：天人合一peng
這篇文章主要為大家詳細介紹了如何利用OpenCV實現動態畫矩形和多邊形并保存坐標，文中的示例代碼講解詳細，具有一定的參考價值，需要的可以參考一下
現在畫矩形和多邊形一次只能畫一個，還需要修改讓其一次可畫多個？
1 畫矩形和多邊形，模式通過鍵盤控制
# 通過鍵盤s和p區別畫矩形和多邊形并保存坐標
# 畫矩形是OPencv自帶的，只能通過按enter結束
import copy
import json
import joblib
import cv2
import numpy as np
import os
import matplotlib.pyplot as plt
import imutils
from win32 import win32gui, win32print
from win32.lib import win32con
WIN_NAME = 'draw_rect'
def get_list0(path):
if not os.path.exists(path):
print("記錄該型號標準位置的文件缺失/或輸入型號與其對應標準文件名稱不一致")
file1 = open(path, 'r')
lines = file1.readlines()
# for line in lines:
# if (any(kw in line for kw in kws)):
# SeriousFix.write(line + '\n')
zb0, list0 = [], []
for i in range(len(lines)): # 取坐標
if lines[i] != '(pt1,pt2):\n':
zb0.append(lines[i][:-1])
# print(zb0)
for i in range(0, len(zb0)): # 轉換整數
zb0[i] = int(zb0[i])
# print(zb0)
for i in range(0, len(zb0), 4): # 每四個取一次，加入列表
x0, y0, x1, y1 = zb0[i: i + 4]
# 使點設為左上至右下
if y1<=y0:
temp = y0
y0 = y1
y1 = temp
# print(x0,y0,x1,y1)
list0.append([x0, y0, x1, y1])
print("list0:", list0)
file1.close()
return list0
'''
初始校驗文件，文件名代表類型，檢驗時讀取文件名作為類型判斷標準
打開sourse文件夾，讀取標準件原始圖片，保存標準位置到biaozhun/labels，保存畫有標準位置的圖片到biaozhun/imgs
'''
def define_start(img_name, img_path, type):
pts = [] # 用于存放點
def draw_roi(event, x, y, flags, param):
img2 = img.copy()
# print("----------")
# cv2.imshow("img2", img2)
# cv2.waitKey(0)
if event == cv2.EVENT_LBUTTONDOWN: # 左鍵點擊，選擇點
pts.append((x, y))
if event == cv2.EVENT_RBUTTONDOWN: # 右鍵點擊，取消最近一次選擇的點
pts.pop()
if event == cv2.EVENT_MBUTTONDOWN: # 中鍵繪制輪廓
cv2.line(img=img2, pt1=pts[0], pt2=pts[-1], color=(255, 0, 0), thickness=2)
for i in range(len(pts)):
txt_save.append("(pt1,pt2):")
txt_save.append(str(pts[i][0]))
txt_save.append(str(pts[i][1]))
if len(pts) > 0:
# 將pts中的最后一點畫出來
cv2.circle(img2, pts[-1], 3, (0, 0, 255), -1)
if len(pts) > 1:
# 畫線
for i in range(len(pts) - 1):
cv2.circle(img2, pts[i], 5, (0, 0, 255), -1) # x ,y 為鼠標點擊地方的坐標
cv2.line(img=img2, pt1=pts[i], pt2=pts[i + 1], color=(255, 0, 0), thickness=2)
cv2.line(img=img2, pt1=pts[0], pt2=pts[-1], color=(255, 0, 0), thickness=2)
cv2.imshow(WIN_NAME, img2)
def set_ratio(image):
if image is None:
return 0, 0, 0
# print(image.shape)
img_h, img_w = image.shape[:2]
"""獲取真實的分辨率"""
hDC = win32gui.GetDC(0)
screen_w = win32print.GetDeviceCaps(hDC, win32con.DESKTOPHORZRES) # 橫向分辨率
screen_h = win32print.GetDeviceCaps(hDC, win32con.DESKTOPVERTRES) # 縱向分辨率
# print(img_w,img_h)
num_wh = 1
if img_w * img_h > 1.9e7: # 兩千萬像素
num_wh = 4
elif img_w * img_h > 1.0e7: # 一千萬像素
num_wh = 3
elif min(img_w, img_h) >= min(screen_w, screen_h) or \
max(img_w, img_h) >= max(screen_w, screen_h):
num_wh = 2
else:
num_wh = 1
ratio_h = int(img_h / num_wh)
ratio_w = int(img_w / num_wh)
return ratio_h, ratio_w, num_wh
(filepath, file) = os.path.split(img_path)
# file = 'r.jpg' # 需要用戶選擇圖片，傳入圖片的名稱
if file.endswith(".jpg") or file.endswith(".png"): # 如果file以jpg結尾
# img_dir = os.path.join(file_dir, file)
image = cv2.imread(img_path)
ratio_h, ratio_w, num_wh = set_ratio(image)
if ratio_h == 0 and ratio_w == 0 and num_wh == 0:
print("No image")
txt_path = "./DrawRect/biaozhun/labels/%s.txt" % (img_name)
open(txt_path, 'w').close() # 清空文件數據
f = open(txt_path, mode='a+')
txt_save = []
img = imutils.resize(image, width = ratio_w)
cv2.namedWindow(WIN_NAME, cv2.WINDOW_NORMAL)
# # cv2.namedWindow(WIN_NAME, 2)
cv2.resizeWindow(WIN_NAME, ratio_w, ratio_h)
cv2.imshow(WIN_NAME, img)
# cv2.waitKey(1)
key = cv2.waitKey(0)
# 矩形
if key == ord("s"):
roi = cv2.selectROI(windowName=WIN_NAME, img=img, showCrosshair=False, fromCenter=False)
x, y, w, h = roi
cv2.rectangle(img=img, pt1=(x, y), pt2=(x + w, y + h), color=(0, 0, 255), thickness=2)
print('pt1: x = %d, y = %d' % (x, y))
txt_save.append("(pt1,pt2):")
txt_save.append(str(x))
txt_save.append(str(y))
txt_save.append(str(x + w))
txt_save.append(str(y + h))
cv2.imshow(WIN_NAME, img)
cv2.waitKey(0)
# 保存txt坐標
num_txt_i = 0
for txt_i in range(len(txt_save)):
txt_i = txt_i - num_txt_i
if txt_save[txt_i] == 'delete':
for j in range(6):
del txt_save[txt_i - j]
num_txt_i += 6
for txt_i in txt_save:
f.write(str(txt_i) + '\n')
print("txt_save:", txt_save)
# break
f.close()
# 查找距離較近的，刪除
points_list = get_list0(txt_path)
new_points_list = []
for i in points_list:
x0, y0, x1, y1 = i[0], i[1], i[2], i[3]
if abs(x1 - x0) > 5 and abs(y1 - y0) > 5:
new_points_list.append('(pt1,pt2):')
new_points_list.append(x0)
new_points_list.append(y0)
new_points_list.append(x1)
new_points_list.append(y1)
print(new_points_list)
file2 = open(txt_path, 'w')
for i in new_points_list:
file2.write(str(i) + '\n')
file2.close()
# 多邊形
elif key == ord("p"):
print("---")
cv2.setMouseCallback(WIN_NAME, draw_roi)
while True:
key = cv2.waitKey(1)
if key == 13 or cv2.getWindowProperty(WIN_NAME, 0) == -1: # enter回車鍵:
# 保存txt坐標
for i in range(len(pts)):
txt_save.append("(pt1,pt2):")
txt_save.append(str(pts[i][0]))
txt_save.append(str(pts[i][1]))
num_txt_i = 0
for txt_i in range(len(txt_save)):
txt_i = txt_i - num_txt_i
if txt_save[txt_i] == 'delete':
for j in range(6):
del txt_save[txt_i - j]
num_txt_i += 6
for txt_i in txt_save:
f.write(str(txt_i) + '\n')
print("txt_save:", txt_save)
# break
f.close()
# 現在是多邊形之前的方法不行
# # 查找距離較近的，刪除
# points_list = get_list0(txt_path)
# new_points_list = []
# for i in points_list:
# x0, y0, x1, y1 = i[0], i[1], i[2], i[3]
# if abs(x1 - x0) > 5 and abs(y1 - y0) > 5:
# new_points_list.append('(pt1,pt2):')
# new_points_list.append(x0)
# new_points_list.append(y0)
# new_points_list.append(x1)
# new_points_list.append(y1)
# print(new_points_list)
# file2 = open(txt_path, 'w')
# for i in new_points_list:
# file2.write(str(i) + '\n')
# file2.close()
break
cv2.destroyAllWindows()
else:
print("輸入圖片類型錯誤！請輸入JPG/PNG格式的圖片！")
if __name__ == '__main__':
# path_file = open('./datasets/drawPath.json', 'r')
path_file = open('./DataSet/drawPath.json', 'r')
path_dic = json.load(path_file)
img_path = path_dic['path'] # # 繪制標準圖片的地址
path_file.close()
img_name = img_path.split('\\')[-1][:-4]
define_start(img_name, img_path, 0)drawPath.json文件
{"path": "D:\\ALLBuffers\\Pycharm\\OpencvRun\\DataSet\\smpj.jpg"}
2 修改后默認情況下直接畫多邊形，按鼠標中鍵切換為畫矩形模式
## 1 程序默認運行是直接繪多邊形，直接點擊即可，
## 繪制完成后點擊右上角的X或按enter即可關閉圖像并保存坐標
## 2 在默認情況下，單擊鼠標中鍵或空格即可切換為矩形模式
## 3 在繪制矩形模式下只能通過按enter關閉圖像并保存坐標
## 4 在繪制矩形模式下鼠標左鍵取消上一步操作或重新繪制矩形
## 5 在繪制多邊形時鼠標右鍵取消上一步操作
import copy
import json
import joblib
import cv2
import numpy as np
import os
import matplotlib.pyplot as plt
import imutils
from win32 import win32gui, win32print
from win32.lib import win32con
WIN_NAME = 'draw_rect'
def get_list0(path):
if not os.path.exists(path):
print("記錄該型號標準位置的文件缺失/或輸入型號與其對應標準文件名稱不一致")
file1 = open(path, 'r')
lines = file1.readlines()
# for line in lines:
# if (any(kw in line for kw in kws)):
# SeriousFix.write(line + '\n')
zb0, list0 = [], []
for i in range(len(lines)): # 取坐標
if lines[i] != '(pt1,pt2):\n':
zb0.append(lines[i][:-1])
# print(zb0)
for i in range(0, len(zb0)): # 轉換整數
zb0[i] = int(zb0[i])
# print(zb0)
for i in range(0, len(zb0), 4): # 每四個取一次，加入列表
x0, y0, x1, y1 = zb0[i: i + 4]
# 使點設為左上至右下
if y1<=y0:
temp = y0
y0 = y1
y1 = temp
# print(x0,y0,x1,y1)
list0.append([x0, y0, x1, y1])
print("list0:", list0)
file1.close()
return list0
'''
初始校驗文件，文件名代表類型，檢驗時讀取文件名作為類型判斷標準
打開sourse文件夾，讀取標準件原始圖片，保存標準位置到biaozhun/labels，保存畫有標準位置的圖片到biaozhun/imgs
'''
POLYLINES = False # 多邊形向矩形切換
def define_start(img_name, img_path, type):
pts = [] # 用于存放點
def draw_roi(event, x, y, flags, param):
img2 = img.copy()
if event == cv2.EVENT_LBUTTONDOWN: # 左鍵點擊，選擇點
pts.append((x, y))
cv2.circle(img2, pts[-1], 3, (0, 255, 0), -1)
#
# if event == cv2.EVENT_MOUSEMOVE: # 畫圓
# if len(pts) >= 1:
# radius = np.sqrt(pow(x-pts[0][0],2) + pow(y-pts[0][1],2))
# radius = int(radius)
# rs.append(radius)
# cv2.circle(img2, pts[0], rs[-1], (0, 0, 255), 2) # x ,y 為鼠標點擊地方的坐標
#
if event == cv2.EVENT_RBUTTONDOWN: # 右鍵點擊，取消最近一次選擇的點
if len(pts) >= 1:
pts.pop()
if event == cv2.EVENT_MBUTTONDOWN: # 中鍵繪制輪廓
global POLYLINES
# print("MBUTTONDOWN: # 中鍵繪制輪廓")
POLYLINES = True
if len(pts) > 0:
# 將pts中的最后一點畫出來
cv2.circle(img2, pts[-1], 3, (0, 255, 0), -1)
if len(pts) > 1:
# 畫線
for i in range(len(pts) - 1):
cv2.circle(img2, pts[i], 5, (0, 255, 0), -1) # x ,y 為鼠標點擊地方的坐標
cv2.line(img=img2, pt1=pts[i], pt2=pts[i + 1], color=(0, 0, 255), thickness=2)
cv2.line(img=img2, pt1=pts[0], pt2=pts[-1], color=(0, 0, 255), thickness=2)
cv2.imshow(WIN_NAME, img2)
def set_ratio(image):
if image is None:
return 0, 0, 0
# print(image.shape)
img_h, img_w = image.shape[:2]
"""獲取真實的分辨率"""
hDC = win32gui.GetDC(0)
screen_w = win32print.GetDeviceCaps(hDC, win32con.DESKTOPHORZRES) # 橫向分辨率
screen_h = win32print.GetDeviceCaps(hDC, win32con.DESKTOPVERTRES) # 縱向分辨率
# print(img_w,img_h)
num_wh = 1
if img_w * img_h > 1.9e7: # 兩千萬像素
num_wh = 4
elif img_w * img_h > 1.0e7: # 一千萬像素
num_wh = 3
elif min(img_w, img_h) >= min(screen_w, screen_h) or \
max(img_w, img_h) >= max(screen_w, screen_h):
num_wh = 2
else:
num_wh = 1
ratio_h = int(img_h / num_wh)
ratio_w = int(img_w / num_wh)
return ratio_h, ratio_w, num_wh
(filepath, file) = os.path.split(img_path)
# file = 'r.jpg' # 需要用戶選擇圖片，傳入圖片的名稱
if file.endswith(".jpg") or file.endswith(".png"): # 如果file以jpg結尾
# img_dir = os.path.join(file_dir, file)
image = cv2.imread(img_path)
ratio_h, ratio_w, num_wh = set_ratio(image)
if ratio_h == 0 and ratio_w == 0 and num_wh == 0:
print("No image")
txt_path = "./DrawRect/biaozhun/labels/%s.txt" % (img_name)
open(txt_path, 'w').close() # 清空文件數據
f = open(txt_path, mode='a+')
txt_save = []
img = imutils.resize(image, width = ratio_w)
cv2.namedWindow(WIN_NAME, cv2.WINDOW_NORMAL)
cv2.resizeWindow(WIN_NAME, ratio_w, ratio_h)
cv2.imshow(WIN_NAME, img)
# 默認直接執行畫多邊形
cv2.setMouseCallback(WIN_NAME, draw_roi)
while True:
w_key = cv2.waitKey(1)
# enter 或回車鍵:
if w_key == 13 or cv2.getWindowProperty(WIN_NAME, 0) == -1:
for i in range(len(pts)):
if i == 0:
txt_save.append("(pt1,pt2):")
txt_save.append(str(pts[i][0]))
txt_save.append(str(pts[i][1]))
num_txt_i = 0
for txt_i in range(len(txt_save)):
txt_i = txt_i - num_txt_i
if txt_save[txt_i] == 'delete':
for j in range(6):
del txt_save[txt_i - j]
num_txt_i += 6
for txt_i in txt_save:
f.write(str(txt_i) + '\n')
print("txt_save:", txt_save)
break
f.close()
# 現在是多邊形之前的方法不行
# # 查找距離較近的，刪除
# points_list = get_list0(txt_path)
# new_points_list = []
# for i in points_list:
# x0, y0, x1, y1 = i[0], i[1], i[2], i[3]
# if abs(x1 - x0) > 5 and abs(y1 - y0) > 5:
# new_points_list.append('(pt1,pt2):')
# new_points_list.append(x0)
# new_points_list.append(y0)
# new_points_list.append(x1)
# new_points_list.append(y1)
# print(new_points_list)
# file2 = open(txt_path, 'w')
# for i in new_points_list:
# file2.write(str(i) + '\n')
# file2.close()
# 空格切換至矩形
if POLYLINES == True or w_key == 32:
roi = cv2.selectROI(windowName=WIN_NAME, img=img, showCrosshair=False, fromCenter=False)
x, y, w, h = roi
cv2.rectangle(img=img, pt1=(x, y), pt2=(x + w, y + h), color=(0, 0, 255), thickness=2)
print('pt1: x = %d, y = %d' % (x, y))
txt_save.append("(pt1,pt2):")
txt_save.append(str(x))
txt_save.append(str(y))
txt_save.append(str(x + w))
txt_save.append(str(y + h))
# 用紅色框顯示ROI
# cv2.imshow(WIN_NAME, img)
# cv2.waitKey(0)
# 保存txt坐標
num_txt_i = 0
for txt_i in range(len(txt_save)):
txt_i = txt_i - num_txt_i
if txt_save[txt_i] == 'delete':
for j in range(6):
del txt_save[txt_i - j]
num_txt_i += 6
for txt_i in txt_save:
f.write(str(txt_i) + '\n')
print("txt_save:", txt_save)
# break
f.close()
# 查找距離較近的，刪除
points_list = get_list0(txt_path)
new_points_list = []
for i in points_list:
x0, y0, x1, y1 = i[0], i[1], i[2], i[3]
if abs(x1 - x0) > 5 and abs(y1 - y0) > 5:
new_points_list.append('(pt1,pt2):')
new_points_list.append(x0)
new_points_list.append(y0)
new_points_list.append(x1)
new_points_list.append(y1)
print(new_points_list)
file2 = open(txt_path, 'w')
for i in new_points_list:
file2.write(str(i) + '\n')
file2.close()
break
cv2.destroyAllWindows()
else:
print("輸入圖片類型錯誤！請輸入JPG/PNG格式的圖片！")
if __name__ == '__main__':
# path_file = open('./datasets/drawPath.json', 'r')
path_file = open('./DataSet/drawPath.json', 'r')
path_dic = json.load(path_file)
img_path = path_dic['path'] # # 繪制標準圖片的地址
path_file.close()
img_name = img_path.split('\\')[-1][:-4]
define_start(img_name, img_path, 0)以上就是基于OpenCV實現動態畫矩形和多邊形并保存坐標的詳細內容，更多關于OpenCV動態畫矩形 多邊形的資料請關注腳本之家其它相關文章！
您可能感興趣的文章:
- 基于OpenCV和Gradio實現簡單的人臉識別詳解
- 在樹莓派2或樹莓派B+上安裝Python和OpenCV的教程
- 樹莓派極簡安裝OpenCv的方法步驟
- visual studio 2012安裝配置方法圖文教程 附opencv配置教程
- windows下Pycharm安裝opencv的多種方法
- nodejs安裝與配置過程+初學實例解讀
- node-gyp安裝vuetify編譯失敗gyp?ERR的問題及解決
- 安裝nvm并使用nvm安裝nodejs及配置環境變量的全過程
- window系統 nodejs安裝opencv環境配置圖文詳解
相關文章
python區塊鏈簡易版交易完善挖礦獎勵示例
這篇文章主要介紹了python區塊鏈簡易版交易完善挖礦獎勵示例，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-05-05
使用Python代碼識別股票價格圖表模式實現
這篇文章主要為大家介紹了使用Python代碼識別股票價格圖表模式的實現示例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-12-12
Python基于yaml文件配置logging日志過程解析
這篇文章主要介紹了Python基于yaml文件配置logging日志過程解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-06-06
在Python中安裝webssh服務,可以使用webssh庫,下面給大家分享python3安裝webssh服務的操作方法,感興趣的朋友跟隨小編一起看看吧2024-04-04
對Tensorflow中的矩陣運算函數詳解
今天小編就為大家分享一篇對Tensorflow中的矩陣運算函數詳解，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2018-07-07
這篇文章主要介紹了Python切片知識解析的相關資料,需要的朋友可以參考下2016-03-03
今天給大家?guī)?lái)的是關于Python的相關知識,文章圍繞著PyCharm導入numpy庫的幾種方式展開,文中有非常詳細的解釋及代碼示例,需要的朋友可以參考下2021-06-06
python線程優先級隊列知識點總結
在本篇文章里小編給大家整理的一篇關于python線程優先級隊列知識點總結，有興趣的朋友們可以學習參考下。2021-02-02
這篇文章主要為大家詳細介紹了如何使用Python自制一個圖像批量壓縮工具,文中的示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起學習一下2024-04-04
Python實現將HTML轉換成doc格式文件的方法示例
這篇文章主要介紹了Python實現將HTML轉換成doc格式文件的方法,涉及Python htmlparser及docx模塊的相關使用技巧,需要的朋友可以參考下2017-11-11