快捷導航

基于WPF實現3D畫廊動畫效果的示例代碼

更新時間：2023年02月28日 17:04:13 作者：微小冷

這篇文章主要為大家詳細介紹了如何基于WPF實現簡單的3D畫廊動畫效果，文中的示例代碼講解詳細，感興趣的小伙伴可以跟隨小編一起學習一下

接下來想做一個圖廊，所以并沒有必要用立方體，只需做一些“墻壁”就行了。

而在一個平面上建起另一個矩形的平面，實則非常容易，只需輸入墻角的兩點和高度就可以了，這對于寫過正方體的人來說絕對是簡單得很，無非是把四個點劈成兩個三角形

private MeshGeometry3D MakeSurface(Point3D p0, Point3D p1, Point3D p2, Point3D p3)
{
    MeshGeometry3D mesh = new MeshGeometry3D();
    Point3D[] pts ={p0, p1, p2, p3};
    foreach (var pt in pts)
        mesh.Positions.Add(pt);
    foreach (var i in new int[6] { 0, 1, 2, 2, 3, 0 })
        mesh.TriangleIndices.Add(i);

???????    return mesh;
}

接下來可以像之前做正方體時那樣，先做一個平的地面，然后在地面上放置一些正方體。

由于地面上的正方形要求垂直于地面，所以重載一下

private MeshGeometry3D MakeSurface(Point p0, Point p1, double high)
{
    return MakeSurface(
        new Point3D(p0.X, 0, p0.Y), 
        new Point3D(p1.X, 0, p1.Y), 
        new Point3D(p1.X, high, p1.Y), 
        new Point3D(p0.X, high, p0.Y));
}

然后生成模型

代碼為

private void DefineModel(Model3DGroup group)
{
    // Make the ground.
    const double wid = 10;
    MeshGeometry3D groundMesh = MakeSurface(
        new Point3D(-wid, 0, -wid),
        new Point3D(-wid, 0, +wid),
        new Point3D(+wid, 0, +wid),
        new Point3D(+wid, 0, -wid));
    DiffuseMaterial groundMaterial = new DiffuseMaterial(Brushes.DarkGray);
    GeometryModel3D groundModel = new GeometryModel3D(groundMesh, groundMaterial);
    group.Children.Add(groundModel);

    MaterialGroup gpMaterial;

    for (int x = -2; x <= 2; x += 2)
    {
        for (int y = -2; y <= 2; y += 2)
        {
            MeshGeometry3D mesh = MakeSurface(new Point(x, y), new Point(x, y + 1), 1);
            byte r = (byte)(128 + x * 50);
            byte g = (byte)(128 + y * 50);
            byte b = (byte)(128 + x * 50);
            Color color = Color.FromArgb(255, r, g, b);
            DiffuseMaterial material = new DiffuseMaterial(
                new SolidColorBrush(color));

            GeometryModel3D model = new GeometryModel3D(mesh, material);
            group.Children.Add(model);
        }
    }
}

接下來就是掛載貼圖，結果大致如下

其方法也很簡單，就是把material變成想要的圖片，故而先把圖像放在一個字符串?dāng)?shù)組里

static readonly string[] imgs = new string[9]
{
    "2d1.png","2d2.png","2d3.png","2d4.png","2d5.png",
    "2d6.png","2d7.png","2d8.png","2d9.png"
};

接下來需要注意一點，圖像本身需要一個坐標系，故而要把墻壁的代碼改為

private MeshGeometry3D MakeSurface(Point p0, Point p1, double high, string uri = null)
{
    var mesh = MakeSurface(
        new Point3D(p0.X, 0, p0.Y), new Point3D(p1.X, 0, p1.Y), 
        new Point3D(p1.X, high, p1.Y), new Point3D(p0.X, high, p0.Y));
    //這四個點代表圖像上的坐標和圖形中點的對應關系
    Point[] textureCoods = new Point[4]
    {
        new Point(0, 1),new Point(1, 1),
        new Point(1, 0),new Point(0, 0),
    };
    foreach (var pt  in textureCoods)
        mesh.TextureCoordinates.Add(pt);
    return mesh;
}

然后在生成正方形時，用圖像取代顏色

ImageBrush imgBrush = new ImageBrush();
imgBrush.ImageSource = new BitmapImage(new Uri(
    $"imgs//{imgs[k++]}", UriKind.Relative));

MeshGeometry3D mesh = MakeSurface(new Point(x, y), new Point(x, y + 1), 1);

GeometryModel3D model = new GeometryModel3D(mesh, new DiffuseMaterial(imgBrush));
group.Children.Add(model);

這樣二次元妹紙就花在墻壁上啦。

當然，如果想象力豐富的話可以把墻壁連在一起像迷宮那種，肯定會有沉浸式的體驗。

到此這篇關于基于WPF實現3D畫廊動畫效果的示例代碼的文章就介紹到這了,更多相關WPF 3D畫廊內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: