MySQL中dd::columns表結構轉table過程及應用詳解

更新時間：2022年09月21日 10:40:35 作者：GreatSQL社區

MySQL的dd表是用來存放表結構和各種建表信息的，客戶端建的表都存在mysql.table和mysql.columns表里，還有一個表mysql.column_type_elements比較特殊，用來存放SET和ENUM類型的字段集合值信息，對mysql dd::columns表結構相關知識感興趣的朋友一起看看吧

一、MySQL的dd表介紹

MySQL的dd表是用來存放表結構和各種建表信息的，客戶端建的表都存在mysql.table和mysql.columns表里，還有一個表mysql.column_type_elements比較特殊，用來存放SET和ENUM類型的字段集合值信息。看一下下面這張表的mysql.columns表和mysql.column_type_elements信息。為了縮短顯示長度，這里只展示幾個重要的值。

#建表：
CREATE TABLE t1(id int  not null auto_increment primary key,col1 number,col2 VARCHAR(100),col3 pls_integer,
col4 enum('x','y') default 'x',col5 set('x1','y1'))  partition by hash(id) partitions 3;
SET SESSION debug='+d,skip_dd_table_access_check';
mysql> select name,ordinal_position,type,default_value_utf8,options,column_type_utf8 from mysql.columns where table_id=383;
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
| name        | ordinal_position | type                  | default_value_utf8 | options           | column_type_utf8 |
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
| col1        |                2 | MYSQL_TYPE_NEWDECIMAL | NULL               | interval_count=0; | decimal(65,0)    |
| col2        |                3 | MYSQL_TYPE_VARCHAR    | NULL               | interval_count=0; | varchar(100)     |
| col3        |                4 | MYSQL_TYPE_LONG       | NULL               | interval_count=0; | int              |
| col4        |                5 | MYSQL_TYPE_ENUM       | x                  | interval_count=2; | enum('x','y')    |
| col5        |                6 | MYSQL_TYPE_SET        | NULL               | interval_count=2; | set('x1','y1')   |
| DB_ROLL_PTR |                8 | MYSQL_TYPE_LONGLONG   | NULL               | NULL              |                  |
| DB_TRX_ID   |                7 | MYSQL_TYPE_INT24      | NULL               | NULL              |                  |
| id          |                1 | MYSQL_TYPE_LONG       | NULL               | interval_count=0; | int              |
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
8 rows in set (0.00 sec)

mysql.columns表說明如下：

ordinal_position是該字段在表里的偏移量，這里多了3個字段，DB_ROLL_PTR、DB_TRX_ID、id是用來執行undo的，記錄了字段的版本信息。

default_value_utf8是用來保存默認值的。options里面有interval_count用來保存集合類型的數值數的。columns表的options的key一共有如下幾種：

static const std::set<String_type> default_valid_option_keys = {
    "column_format", "geom_type",         "interval_count", "not_secondary",
    "storage",       "treat_bit_as_char", "zip_dict_id",    "is_array"};

mysql>  select * from mysql.column_type_elements where column_id=4286;
+-----------+---------------+------+
| column_id | element_index | name |
+-----------+---------------+------+
|      4286 |             1 | x    |
|      4286 |             2 | y    |
+-----------+---------------+------+
2 rows in set (0.01 sec)
<strong>#這里的column_id=4286是col4的id值，x和y分別對應了set定義時候的2個集合值。</strong>

二、代碼跟蹤

現在重新啟動數據庫，跟蹤一下這個columns表怎么轉為代碼里面的TABLE的field對象。首先找到表的dd信息然后打開表獲取field信息。

mysql> select * from t1;

輸入該命令后找到columns表轉為field的代碼：

#0??fill_column_from_dd?(
????thd=0x555558b35a06?<std::char_traits<char>::compare(char?const*,?char?const*,?unsigned?long)+61>,?
????share=0x7fffe83f1b60,?
????col_obj=0x555558bb0a5e?<std::__cxx11::basic_string<char,?std::char_traits<char>,?Stateless_allocator<char,?dd::String_type_alloc,?My_free_functor>?>::compare(std::__cxx11::basic_string<char,?std::char_traits<char>,?Stateless_allocator<char,?dd::String_type_alloc,?My_free_functor>?>?const&)?const+142>,?
????null_pos=0x7fffe83f1880?"\005",?null_bit_pos=32767,?rec_pos=0x7fff2c05ac10?"explicit_encryption",?
????field_nr=0)?at?/mysql/sql/dd_table_share.cc:955
#1??0x00005555593c4c17?in?fill_columns_from_dd?(thd=0x7fff2c006890,?share=0x7fff2cbf19e8,?
????tab_obj=0x7fff2cbb9b38)?at?/mysql/sql/dd_table_share.cc:1235
#2??0x00005555593c9e54?in?open_table_def?(thd=0x7fff2c006890,?share=0x7fff2cbf19e8,?table_def=...)
????at?/mysql/sql/dd_table_share.cc:2408
#3??0x0000555558e76a13?in?get_table_share?(thd=0x7fff2c006890,?db=0x7fff2cbeeff0?"db1",?
????table_name=0x7fff2cc03210?"t1",?key=0x7fff2cbeed87?"db1",?key_length=7,?open_view=true,?
????open_secondary=false)?at?/mysql/sql/sql_base.cc:801
#4??0x0000555558e76f08?in?get_table_share_with_discover?(thd=0x7fff2c006890,?table_list=0x7fff2cbee9b8,?
????key=0x7fff2cbeed87?"db1",?key_length=7,?open_secondary=false,?error=0x7fffe83f1ea4)
????at?/mysql/sql/sql_base.cc:889
#5??0x0000555558e7cd34?in?open_table?(thd=0x7fff2c006890,?table_list=0x7fff2cbee9b8,?
????ot_ctx=0x7fffe83f2380)?at?/mysql/sql/sql_base.cc:3230
#6??0x0000555558e81769?in?open_and_process_table?(thd=0x7fff2c006890,?lex=0x7fff2c01bdf0,?
????tables=0x7fff2cbee9b8,?counter=0x7fff2c01be48,?prelocking_strategy=0x7fffe83f2408,?
????has_prelocking_list=false,?ot_ctx=0x7fffe83f2380)
????at?/mysql/sql/sql_base.cc:5118
#7??0x0000555558e833bd?in?open_tables?(thd=0x7fff2c006890,?start=0x7fffe83f23f0,?counter=0x7fff2c01be48,?
????flags=0,?prelocking_strategy=0x7fffe83f2408)
????at?/mysql/sql/sql_base.cc:5928
#8??0x0000555558e85626?in?open_tables_for_query?(thd=0x7fff2c006890,?tables=0x7fff2cbee9b8,?flags=0)
????at?/mysql/sql/sql_base.cc:6904
#9??0x0000555559075720?in?Sql_cmd_dml::prepare?(this=0x7fff2cbef400,?thd=0x7fff2c006890)
????at?/mysql/sql/sql_select.cc:372
#10?0x00005555590760bf?in?Sql_cmd_dml::execute?(this=0x7fff2cbef400,?thd=0x7fff2c006890)
????at?/mysql/sql/sql_select.cc:527
#11?0x0000555558fedc8e?in?mysql_execute_command?(thd=0x7fff2c006890,?first_level=true)
????at?/mysql/sql/sql_parse.cc:4794
#12?0x0000555558fefe25?in?dispatch_sql_command?(thd=0x7fff2c006890,?parser_state=0x7fffe83f3990,?
????update_userstat=false)?at?/mysql/sql/sql_parse.cc:5399
#13?0x0000555558fe52d3?in?dispatch_command?(thd=0x7fff2c006890,?com_data=0x7fffe83f4b70,?
????command=COM_QUERY)?at?/mysql/sql/sql_parse.cc:2000
#14?0x0000555558fe3643?in?do_command?(thd=0x7fff2c006890)
????at?/mysql/sql/sql_parse.cc:1448
#15?0x000055555920e200?in?handle_connection?(arg=0x555560a65790)
????at?/mysql/sql/conn_handler/connection_handler_per_thread.cc:307
#16?0x000055555ae36375?in?pfs_spawn_thread?(arg=0x5555608a2e20)
????at?/mysql/storage/perfschema/pfs.cc:2899
#17?0x00007ffff77a6609?in?start_thread?(arg=<optimized?out>)?at?pthread_create.c:477
#18?0x00007ffff76cb163?in?clone?()?at?../sysdeps/unix/sysv/linux/x86_64/clone.S:95

<strong>#fill_column_from_dd函數里面最重要的是make_field函數，把字段從dd::Column轉為table的field然后賦值給TABLE_SHARE。
  reg_field = make_field(*col_obj, charset, share, rec_pos, null_pos, null_bit_pos);</strong>

三、知識應用

session每次獲取表的信息都是在第一次打開表的時候就做好了，下次如果表沒有變化就從Table_cache直接獲取表信息?，F(xiàn)在假設我們要改col4字段的集合值又不想通過alter語句來執行，那就可以直接對dd表進行操作。注意，該操作對生產環境有很大風險，這里只用來進行知識實踐，不能用來在生產環境實際操作。

把col4的x,y值改為a,b：首先試著插入col4=x的記錄，現在還沒更改dd表所以插入成功。

mysql> insert into t1 values(1,1,'aa',1,'x','x1');
Query OK, 1 row affected (0.03 sec)

接著開始改col4的集合值：

mysql> SET SESSION debug='+d,skip_dd_table_access_check';
Query OK, 0 rows affected (0.02 sec)
mysql> update mysql.columns set default_value_utf8='a' ,column_type_utf8='enum(\'a\',\'b\'))' where table_id=383 and name='col4';
Query OK, 1 row affected (0.03 sec)
Rows matched: 1  Changed: 1  Warnings: 0

mysql> select name,ordinal_position,type,default_value_utf8,options,column_type_utf8 from mysql.columns where table_id=383;
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
| name        | ordinal_position | type                  | default_value_utf8 | options           | column_type_utf8 |
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
| col1        |                2 | MYSQL_TYPE_NEWDECIMAL | NULL               | interval_count=0; | decimal(65,0)    |
| col2        |                3 | MYSQL_TYPE_VARCHAR    | NULL               | interval_count=0; | varchar(100)     |
| col3        |                4 | MYSQL_TYPE_LONG       | NULL               | interval_count=0; | int              |
| col4        |                5 | MYSQL_TYPE_ENUM       | a                  | interval_count=2; | enum('a','b'))   |集合值已改
| col5        |                6 | MYSQL_TYPE_SET        | NULL               | interval_count=2; | set('x1','y1')   |
| DB_ROLL_PTR |                8 | MYSQL_TYPE_LONGLONG   | NULL               | NULL              |                  |
| DB_TRX_ID   |                7 | MYSQL_TYPE_INT24      | NULL               | NULL              |                  |
| id          |                1 | MYSQL_TYPE_LONG       | NULL               | interval_count=0; | int              |
+-------------+------------------+-----------------------+--------------------+-------------------+------------------+
8 rows in set (0.00 sec)

mysql> update mysql.column_type_elements set name='a' where column_id=4286 and element_index=1;
Query OK, 1 row affected (0.03 sec)
Rows matched: 1  Changed: 1  Warnings: 0

mysql> update mysql.column_type_elements set name='b' where column_id=4286 and element_index=2;
Query OK, 1 row affected (0.03 sec)
Rows matched: 1  Changed: 1  Warnings: 0

mysql>  select * from mysql.column_type_elements where column_id=4286;
+-----------+---------------+------+
| column_id | element_index | name |
+-----------+---------------+------+
|      4286 |             1 | a    |<strong>集合值已改</strong>
|      4286 |             2 | b    |<strong>集合值已改</strong>
+-----------+---------------+------+
2 rows in set (0.00 sec)

現在再插入一條col4=x的記錄發現還是成功的，這是因?yàn)閠1沒有重新從dd表轉為TABLE信息，需要重啟后再試。

mysql> insert into t1 values(2,1,'aa',1,'x','x1');
Query OK, 1 row affected (0.02 sec)

重啟數據庫，然后登錄。再次插入col4=x發現報錯了，因?yàn)檫@時候的TABLE信息是重新從dd表轉化的。

mysql> insert into t1 values(2,1,'aa',1,'x','x1');
ERROR 1265 (01000): Data truncated for column 'col4' at row 1

插入col4=a的記錄成功，說明更改成功。

mysql> insert into t1 values(3,1,'aa',1,'a','x1');
Query OK, 1 row affected (0.02 sec)

查看建表信息,發現已經成功更改。

mysql> show create table t1;
+-------+-------------------------+
| Table | Create Table     |
+-------+-------------------------+
| t1    | CREATE TABLE `t1` (
  `id` int NOT NULL AUTO_INCREMENT,
  `col1` decimal(65,0) DEFAULT NULL,
  `col2` varchar(100) DEFAULT NULL,
  `col3` int DEFAULT NULL,
  `col4` enum('a','b') DEFAULT 'a',更改成功
  `col5` set('x1','y1') DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=4 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
/*!50100 PARTITION BY HASH (`id`)
PARTITIONS 3 */ 
+-------+-------------------------+

四、總結

實際上更改表結構如果通過alter命令來改流程跟上面也是一樣的，也是通過更新dd表來實現表結構的變更，這里只是從更底層來介紹。以上的操作在實際生產中不能直接操作，風險很大，會影響現有的記錄和相關的功能。這里只是作為一個案例來更好的說明dd的工作流程，幫助大家遇到問題知道怎么從底層排查。

到此這篇關于MySQL中dd::columns表結構轉table過程及應用詳解的文章就介紹到這了,更多相關mysql dd::columns表結構內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: