淺談Golang內存逃逸

更新時間：2022年08月08日 10:51:40 作者：南一道街丶

本文主要介紹了Golang內存逃逸，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

1.什么是內存逃逸

在一段程序中，每一個函數都會有自己的內存區域分配自己的局部變量，返回值，這些內存會由編譯器在棧中進行分配，每一個函數會分配一個棧幀，在函數運行結束后銷毀，但是有些變量我們想在函數運行結束后仍然使用，就需要把這個變量分配在堆上，這種從“棧”上逃逸到“堆”上的現象叫做內存逃逸

2.什么是逃逸分析

雖然Go語言引入的Gc，GC機制會對堆上的對象進行管理，當某個對象不可達(沒有其他對象引用他)，他將會被回收。雖然GC可以降低工作人員負擔，但是GC也會給程序帶來性能損耗，當堆內存上有大量的堆內存對象，就會給GC很大的壓力，雖然Go語言使用的是標記清除算法，并且在此基礎上使用了三色標記法和寫屏障技術，但是我們在堆上分配大量內存，仍然會對GC造成很大壓力，Go引入了逃逸分析，就是想減少堆內存的分配，可以在棧分配的內存盡量分配在棧上

3.小結

逃逸分析就是在程序編譯階段根據代碼中的數據流，對代碼中哪些變量需要在棧上分配，哪些需要在對象分配的靜態分析方法，堆和棧相比，堆適合分配不可預知大小的內存，但是付出代價是分配速度慢，容易產生碎片，棧分配十分快，棧分配只需要兩個指令“Push”和"Release"分配和釋放，而且堆分配需要先找一塊適合大小的內存塊分配，需要垃圾回收釋放，所以逃逸分析可以更好的做內存分配

Go語言的逃逸分析

src/cmd/compile/internal/gc/escape.go

pointers to stack objects cannot be stored in the heap: 指向棧對象的指針不能存儲在堆中
pointers to a stack object cannot outlive that object:指向棧對象的指針不能超過該對象的存活期，指針不能在棧對象銷毀之后依然存活（例子：聲明的函數返回并銷毀了對象的棧幀，或者它在循環迭代中被重復用于邏輯上不同的變量）

既然逃逸分析是在編譯階段進行的，那我們就可以通過go build -gcflga '-m -m l'查看逃逸分析結果

4.逃逸分析案例

1.函數返回局部指針變量

func Add(x,y int) *int {
 res := 0
 res = x + y
 return &res
}
func main()  {
 Add(1,2)
}

.\pointer.go:4:2: res escapes to heap:
.\pointer.go:4:2: flow: ~r2 = &res:
.\pointer.go:4:2: from &res (address-of) at .\pointer.go:6:9
.\pointer.go:4:2: from return &res (return) at .\pointer.go:6:2
.\pointer.go:4:2: moved to heap: res

函數返回局部變量是一個指針變量，函數Add執行結束，對應棧幀就會銷毀，但是引用返回到函數外部，如果我們外部解析地址，就會導致程序訪問非法內存，所以經過編輯器分析過后將其在堆上分配

2.interface類型逃逸

1.interface產生逃逸

func main()  {
   str := "荔枝"
   fmt.Println(str)
}

E:\GoStudy\src\HighBase\Escape>go build -gcflags="-m -m -l" ./pointer.go
# command-line-arguments
.\pointer.go:20:13: str escapes to heap:
.\pointer.go:20:13: flow: {storage for ... argument} = &{storage for str}:
.\pointer.go:20:13: from str (spill) at .\pointer.go:20:13
.\pointer.go:20:13: from ... argument (slice-literal-element) at .\pointer.go:20:13
.\pointer.go:20:13: flow: {heap} = {storage for ... argument}:
.\pointer.go:20:13: from ... argument (spill) at .\pointer.go:20:13
.\pointer.go:20:13: from fmt.Println(... argument...) (call parameter) at .\pointer.go:20:13
.\pointer.go:20:13: ... argument does not escape
.\pointer.go:20:13: str escapes to heap

str是main的一個局部變量，傳給 fmt.Printl()之后逃逸，因為fmt.Println()的入?yún)⑹莍nterface{}類型,如果參數為interface{}，那么編譯期間就很難確定參數類型

2.指向棧對象的指針不能在堆中

我們把代碼改成這樣

func main()  {
   str := "蘇珊"
   fmt.Println(&str)
}

# command-line-arguments
.\pointer.go:19:2: str escapes to heap:
.\pointer.go:19:2: flow: {storage for ... argument} = &str:
.\pointer.go:19:2: from &str (address-of) at .\pointer.go:20:14
.\pointer.go:19:2: from &str (interface-converted) at .\pointer.go:20:14
.\pointer.go:19:2: from ... argument (slice-literal-element) at .\pointer.go:20:13
.\pointer.go:19:2: flow: {heap} = {storage for ... argument}:
.\pointer.go:19:2: from ... argument (spill) at .\pointer.go:20:13
.\pointer.go:19:2: from fmt.Println(... argument...) (call parameter) at .\pointer.go:20:13
.\pointer.go:19:2: moved to heap: str
.\pointer.go:20:13: ... argument does not escape

這次str也逃逸到堆上面了，在堆上面進行分配，因為入?yún)⑹莍nterface，變量str的地址被以實參的方式傳入fmt.Println被裝箱到一個interface｛｝

裝箱的形參變量要在堆上分配，但是還需要存儲一個棧上的地址,這和之前說的第一條不符，所以str也會分配到堆上

3.閉包產生逃逸

func Increase() func() int {
?n := 0
?return func() int {
? n++
? return n
?}
}

func main() {
?in := Increase()
?fmt.Println(in()) // 1
}

E:\GoStudy\src\HighBase\Escape>go build -gcflags "-m -m -l" ./pointer.go
# command-line-arguments
.\pointer.go:27:2: Increase capturing by ref: n (addr=false assign=true width=8)
.\pointer.go:28:9: func literal escapes to heap:
.\pointer.go:28:9: flow: ~r0 = &{storage for func literal}:
.\pointer.go:28:9: from func literal (spill) at .\pointer.go:28:9
.\pointer.go:28:9: from return func literal (return) at .\pointer.go:28:2
.\pointer.go:27:2: n escapes to heap:
.\pointer.go:27:2: flow: {storage for func literal} = &n:
.\pointer.go:27:2: from n (captured by a closure) at .\pointer.go:29:3
.\pointer.go:27:2: from n (reference) at .\pointer.go:29:3
.\pointer.go:27:2: moved to heap: n
.\pointer.go:28:9: func literal escapes to heap
.\pointer.go:36:16: in() escapes to heap:
.\pointer.go:36:16: flow: {storage for ... argument} = &{storage for in()}:
.\pointer.go:36:16: from in() (spill) at .\pointer.go:36:16
.\pointer.go:36:16: from ... argument (slice-literal-element) at .\pointer.go:36:13
.\pointer.go:36:16: flow: {heap} = {storage for ... argument}:
.\pointer.go:36:16: from ... argument (spill) at .\pointer.go:36:13
.\pointer.go:36:16: from fmt.Println(... argument...) (call parameter) at .\pointer.go:36:13
.\pointer.go:36:13: ... argument does not escape
.\pointer.go:36:16: in() escapes to heap

因為函數是指針類型，所以匿名函數當做返回值產生逃逸，匿名函數使用外部變量n,這個n會一直存在知道in被銷毀

4. 變量大小不確定及棧空間不足引發逃逸

import (
?? ?"math/rand"
)

func LessThan8192() ?{
?? ?nums := make([]int, 100) // = 64KB
?? ?for i := 0; i < len(nums); i++ {
?? ??? ?nums[i] = rand.Int()
?? ?}
}


func MoreThan8192(){
?? ?nums := make([]int, 1000000) // = 64KB
?? ?for i := 0; i < len(nums); i++ {
?? ??? ?nums[i] = rand.Int()
?? ?}
}


func NonConstant() {
?? ?number := 10
?? ?s := make([]int, number)
?? ?for i := 0; i < len(s); i++ {
?? ??? ?s[i] = i
?? ?}
}

func main() {
?? ?NonConstant()
?? ?MoreThan8192()
?? ?LessThan8192()
}

# command-line-arguments
.\pointer.go:43:14: make([]int, 100) does not escape
.\pointer.go:51:14: make([]int, 1000000) escapes to heap:
.\pointer.go:51:14: flow: {heap} = &{storage for make([]int, 1000000)}:
.\pointer.go:51:14: from make([]int, 1000000) (too large for stack) at .\pointer.go:51:14
.\pointer.go:51:14: make([]int, 1000000) escapes to heap
.\pointer.go:60:11: make([]int, number) escapes to heap:
.\pointer.go:60:11: flow: {heap} = &{storage for make([]int, number)}:
.\pointer.go:60:11: from make([]int, number) (non-constant size) at .\pointer.go:60:11
.\pointer.go:60:11: make([]int, number) escapes to heap

?？臻g足夠不會發生逃逸，但是變量過大，已經超過棧空間，會逃逸到堆上