快捷導航

Python封裝zabbix-get接口的代碼分享

更新時間：2022年07月24日 08:30:53 作者：lyshark

Zabbix?是一款強大的開源網管監控工具，該工具的客戶端與服務端是分開的，我們可以直接使用自帶的zabbix_get命令來實現拉取客戶端上的各種數據。本文為大家分享了Python封裝zabbix-get接口的示例代碼，感興趣的可以了解一下

Zabbix 是一款強大的開源網管監控工具，該工具的客戶端與服務端是分開的，我們可以直接使用自帶的zabbix_get命令來實現拉取客戶端上的各種數據，在本地組裝參數并使用Popen開子線程執行該命令，即可實現批量監測。

封裝Engine類: 該類的主要封裝了Zabbix接口的調用,包括最基本的參數收集.

import subprocess,datetime,time,math

class Engine():
    def __init__(self,address,port):
        self.address = address
        self.port = port

    def GetValue(self,key):
        try:
            command = "get.exe -s {0} -p {1} -k {2}".format(self.address,self.port,key).split(" ")
            start = datetime.datetime.now()
            process = subprocess.Popen(command, stdout=subprocess.PIPE, stderr=subprocess.PIPE, shell=True)
            while process.poll() is None:
                time.sleep(1)
                now = datetime.datetime.now()
                if (now - start).seconds > 2:
                    return 0
            return str(process.stdout.readlines()[0].split()[0],"utf-8")
        except Exception:
            return 0

    # ping檢測
    def GetPing(self):
        ref_dict = {"Address":0,"Ping":0}
        ref_dict["Address"] = self.address
        ref_dict["Ping"] = self.GetValue("agent.ping")
        if ref_dict["Ping"] == "1":
            return ref_dict
        else:
            ref_dict["Ping"] = "0"
            return ref_dict
        return ref_dict

    # 獲取主機組基本信息
    def GetSystem(self):
        ref_dict = { "Address" : 0 ,"HostName" : 0,"Uname":0 }
        ref_dict["Address"] = self.address
        ref_dict["HostName"] = self.GetValue("system.hostname")
        ref_dict["Uname"] = self.GetValue("system.uname")
        return ref_dict

    # 獲取CPU利用率
    def GetCPU(self):
        ref_dict = { "Address": 0 ,"Core": 0,"Active":0 , "Avg1": 0 ,"Avg5":0 , "Avg15":0 }
        ref_dict["Address"] = self.address
        ref_dict["Core"] = self.GetValue("system.cpu.num")
        ref_dict["Active"] = math.ceil(float(self.GetValue("system.cpu.util")))
        ref_dict["Avg1"] = self.GetValue("system.cpu.load[,avg1]")
        ref_dict["Avg5"] = self.GetValue("system.cpu.load[,avg5]")
        ref_dict["Avg15"] = self.GetValue("system.cpu.load[,avg15]")
        return ref_dict

    # 獲取內存利用率
    def GetMemory(self):
        ref_dict = { "Address":"0","Total":"0","Free":0,"Percentage":"0" }
        ref_dict["Address"] = self.address

        fps = self.GetPing()
        if fps['Ping'] != "0":
            ref_dict["Total"] = self.GetValue("vm.memory.size[total]")
            ref_dict["Free"] = self.GetValue("vm.memory.size[free]")
            # 計算百分比: percentage = 100 - int(Free/int(Total/100))
            ref_dict["Percentage"] = str( 100 - int( int(ref_dict.get("Free")) / (int(ref_dict.get("Total"))/100)) ) + "%"
            return ref_dict
        else:
            return ref_dict

    # 獲取磁盤數據
    def GetDisk(self):
        ref_list = []

        fps = self.GetPing()
        if fps['Ping'] != "0":
            disk_ = eval( self.GetValue("vfs.fs.discovery"))
            for x in range(len(disk_)):
                dict_ = {"Address": 0, "Name": 0, "Type": 0, "Free": 0}
                dict_["Address"] = self.address
                dict_["Name"] = disk_[x].get("{#FSNAME}")
                dict_["Type"] = disk_[x].get("{#FSTYPE}")
                if dict_["Type"] != "UNKNOWN":
                    pfree = self.GetValue("vfs.fs.size[\"{0}\",pfree]".format(dict_["Name"]))
                    dict_["Free"] = str(math.ceil(float(pfree)))
                else:
                    dict_["Free"] = -1
                ref_list.append(dict_)
            return ref_list
        return ref_list

    # 獲取進程狀態
    def GetProcessStatus(self,process_name):
        fps = self.GetPing()
        dict_ = {"Address": '0', "ProcessName": '0', "ProcessCount": '0', "Status": '0'}
        if fps['Ping'] != "0":
            proc_id = self.GetValue("proc.num[\"{}\"]".format(process_name))
            dict_['Address'] = self.address
            dict_['ProcessName'] = process_name
            if proc_id != "0":
                dict_['ProcessCount'] = proc_id
                dict_['Status'] = "True"
            else:
                dict_['Status'] = "False"
            return dict_
        return dict_

    # 獲取端口開放狀態
    def GetNetworkPort(self,port):
        dict_ = {"Address": '0', "Status": 'False'}
        dict_['Address'] = self.address
        fps = self.GetPing()
        if fps['Ping'] != "0":
            port_ = self.GetValue("net.tcp.listen[{}]".format(port))
            if port_ == "1":
                dict_['Status'] = "True"
            else:
                dict_['Status'] = "False"
            return dict_
        return dict_

    # 檢測Web服務器狀態 通過本地地址:端口 => 檢測目標地址:端口
    def CheckWebServerStatus(self,check_addr,check_port):
        dict_ = {"local_address": "0", "remote_address": "0", "remote_port": "0", "Status":"False"}
        fps = self.GetPing()
        dict_['local_address'] = self.address
        dict_['remote_address'] = check_addr
        dict_['remote_port'] = check_port
        if fps['Ping'] != "0":
            check_ = self.GetValue("net.tcp.port[\"{}\",\"{}\"]".format(check_addr,check_port))
            if check_ == "1":
                dict_['Status'] = "True"
            else:
                dict_['Status'] = "False"
            return dict_
        return dict_

當我們需要使用時，只需要定義變量調用即可，其調用代碼如下。

from engine import Engine

if __name__ == "__main__":
    ptr_windows = Engine("127.0.0.1","10050")
    ret = ptr_windows.GetDisk()
    if len(ret) != 0:
        for item in ret:
            addr = item.get("Address")
            name = item.get("Name")
            type = item.get("Type")
            space = item.get("Free")
            if type != "UNKNOWN" and space != -1:
                print("地址: {} --> 盤符: {} --> 格式: {} --> 剩余空間: {}".format(addr,name,type,space))

到此這篇關于Python封裝zabbix-get接口的代碼分享的文章就介紹到這了,更多相關Python封裝zabbix-get接口內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: