c#?使用線程對串口serialPort進行收發數據(四種)
更新時間：2022年07月22日 10:48:28 作者：雪墩墩
本文主要介紹了c#?使用線程對串口serialPort進行收發數據，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
本文主要介紹了c# 使用線程對串口serialPort進行收發數據，分享給大家，具體如下：
一共寫了四種方法，窗體界面都是一樣的：
方法一：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO.Ports;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Forms;
namespace serialPort_0620
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
//不進行跨線程安全檢查
System.Windows.Forms.Control.CheckForIllegalCrossThreadCalls = false;
}
private void Form1_Load(object sender, EventArgs e)
{
//檢查是否含有串口
string[] str = SerialPort.GetPortNames();
for (int i = 0; i < str.Length; i++)
{
comboBox1.Items.Add(str[i]);
}
button2.Enabled = false;
button3.Enabled = false;
button4.Enabled = false;
dataGridView1.Rows.Add(68);
//標序號
for (int i = 0; i < 69; i++)
{
dataGridView1.Rows[i].Cells[0].Value = i;
}
}
/// <summary>
/// 打開串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button1_Click(object sender, EventArgs e)
{
if (serialPort1.IsOpen)
{
MessageBox.Show("串口已打開");
}
else if (comboBox1.Text == "")
{
MessageBox.Show("請選擇端口！");
}
else if (textBox1.Text == "")
{
MessageBox.Show("請輸入波特率！");
}
else
{
serialPort1.PortName = comboBox1.Text;
serialPort1.BaudRate = Convert.ToInt16(textBox1.Text);
serialPort1.Open();
button1.Enabled = false;
button2.Enabled = true;
button3.Enabled = true;
button4.Enabled = true;
}
}
/// <summary>
/// 發送數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button3_Click(object sender, EventArgs e)
{
if (textBox1.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
serialPort1.WriteLine(textBox2.Text);
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
int a = listBox1.Items.Count;
listBox1.SelectedIndex = listBox1.Items.Count - 1;
}
}
/// <summary>
/// 接收數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button4_Click(object sender, EventArgs e)
{
}
/// <summary>
/// 關閉串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button2_Click(object sender, EventArgs e)
{
serialPort1.Close();
button1.Enabled = true;
}
Thread thread;
/// <summary>
/// 開始
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button5_Click(object sender, EventArgs e)
{
if (false == serialPort1.IsOpen)
{
MessageBox.Show("端口未打開");
}
else
{
thread = new Thread(new ThreadStart(PrintEven));
thread.Start();
}
}
private void PrintEven()
{
while (true)
{
if (textBox2.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
if (serialPort1.IsOpen)
{
serialPort1.WriteLine(textBox2.Text);
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
listBox1.SelectedIndex = listBox1.Items.Count - 1;
for (int i = 0; i < 47; i++)
{
string[] result = data.Split(',');
dataGridView1.Rows[i].Cells[1].Value = result[i + 1];
dataGridView1.Rows[i].Cells[2].Value = Convert.ToDouble(result[i + 1]) * 5.0 / 1024.0;
}
}
Thread.Sleep(5000);
}
}
}
/// <summary>
/// 結束
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button6_Click(object sender, EventArgs e)
{
thread.Abort();
}
}
}
//不進行跨線程安全檢查
方法二：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO.Ports;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Forms;
namespace serialPort_0620
{
public partial class Form2 : Form
{
public Form2()
{
InitializeComponent();
}
private void Form2_Load(object sender, EventArgs e)
{
string[] str = SerialPort.GetPortNames();
for (int i = 0; i < str.Length; i++)
{
comboBox1.Items.Add(str[i]);
}
button2.Enabled = false;
button3.Enabled = false;
button4.Enabled = false;
dataGridView1.Rows.Add(68);
//標序號
for (int i = 0; i < 69; i++)
{
dataGridView1.Rows[i].Cells[0].Value = i;
}
}
/// <summary>
/// 打開串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button1_Click(object sender, EventArgs e)
{
if (serialPort1.IsOpen)
{
MessageBox.Show("串口已打開");
}
else if (comboBox1.Text == "")
{
MessageBox.Show("請選擇端口！");
}
else if (textBox1.Text == "")
{
MessageBox.Show("請輸入波特率！");
}
else
{
serialPort1.PortName = comboBox1.Text;
serialPort1.BaudRate = Convert.ToInt16(textBox1.Text);
serialPort1.Open();
button1.Enabled = false;
button2.Enabled = true;
button3.Enabled = true;
button4.Enabled = true;
}
}
private void button2_Click(object sender, EventArgs e)
{
serialPort1.Close();
button1.Enabled = true;
}
private void button3_Click(object sender, EventArgs e)
{
if (textBox1.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
serialPort1.WriteLine(textBox2.Text);
}
}
private void button4_Click(object sender, EventArgs e)
{
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
int a = listBox1.Items.Count;
listBox1.SelectedIndex = listBox1.Items.Count - 1;
}
//創建線程
Thread thread;
//建立委托
public delegate void SetTextHandler(string result);
private void setItem(string result)
{
if (listBox1.InvokeRequired == true)
{
SetTextHandler setTextHandler = setItem;
listBox1.Invoke(setTextHandler, new object[] { result });
}
else
{
listBox1.Items.Add(result);
listBox1.SelectedIndex = listBox1.Items.Count - 1;
}
}
private void button5_Click(object sender, EventArgs e)
{
if (false == serialPort1.IsOpen)
{
MessageBox.Show("端口未打開");
}
else
{
thread = new Thread(new ThreadStart(PrintEven));
thread.Start();
}
}
private void PrintEven()
{
while (true)
{
if (textBox2.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
if (serialPort1.IsOpen)
{
serialPort1.WriteLine(textBox2.Text);
string data = serialPort1.ReadLine();
setItem(data);
for (int i = 0; i < 47; i++)
{
string[] result = data.Split(',');
dataGridView1 .Rows[i].Cells[1].Value = result[i + 1];
dataGridView1.Rows[i].Cells[2].Value = Convert.ToDouble(result[i + 1]) * 5.0 / 1024.0;
}
}
Thread.Sleep(5000);
}
}
}
/// <summary>
/// 結束
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button6_Click(object sender, EventArgs e)
{
thread.Abort();
}
}
}
// 建立委托 （參考網上 很規范的寫法）
方法三：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO.Ports;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Forms;
namespace serialPort_0620
{
public partial class Form3 : Form
{
public Form3()
{
InitializeComponent();
}
private void Form3_Load(object sender, EventArgs e)
{
string[] str = SerialPort.GetPortNames();
for (int i = 0; i < str.Length; i++)
{
comboBox1.Items.Add(str[i]);
}
button2.Enabled = false;
button3.Enabled = false;
button4.Enabled = false;
dataGridView1.Rows.Add(68);
//標序號
for (int i = 0; i < 69; i++)
{
dataGridView1.Rows[i].Cells[0].Value = i;
}
}
/// <summary>
/// 打開串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button1_Click(object sender, EventArgs e)
{
if (serialPort1.IsOpen)
{
MessageBox.Show("串口已打開");
}
else if (comboBox1.Text == "")
{
MessageBox.Show("請選擇端口！");
}
else if (textBox1.Text == "")
{
MessageBox.Show("請輸入波特率！");
}
else
{
serialPort1.PortName = comboBox1.Text;
serialPort1.BaudRate = Convert.ToInt16(textBox1.Text);
serialPort1.Open();
button1.Enabled = false;
button2.Enabled = true;
button3.Enabled = true;
button4.Enabled = true;
}
}
/// <summary>
/// 關閉串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button2_Click(object sender, EventArgs e)
{
serialPort1.Close();
button1.Enabled = true;
}
/// <summary>
/// 發送數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button3_Click(object sender, EventArgs e)
{
if (textBox1.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
serialPort1.WriteLine(textBox2.Text);
}
}
/// <summary>
/// 接收數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button4_Click(object sender, EventArgs e)
{
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
int a = listBox1.Items.Count;
listBox1.SelectedIndex = listBox1.Items.Count - 1;
}
//創建線程
Thread thread;
/// <summary>
/// 開始
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button5_Click(object sender, EventArgs e)
{
if (false == serialPort1.IsOpen)
{
MessageBox.Show("端口未打開");
}
else
{
thread = new Thread(new ThreadStart(PrintEven));
thread.Start();
}
}
private void PrintEven()
{
while (true)
{
if (textBox2.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
if (serialPort1.IsOpen)
{
serialPort1.WriteLine(textBox2.Text);
string data = serialPort1.ReadLine();
//setItem(data);
listBox1.Invoke(new Action(()=> {
listBox1.Items.Add(data);
listBox1.SelectedIndex = listBox1.Items.Count - 1;
for (int i = 0; i < 47; i++)
{
string[] result = data.Split(',');
dataGridView1.Rows[i].Cells[1].Value = result[i + 1];
dataGridView1.Rows[i].Cells[2].Value = Convert.ToDouble(result[i + 1]) * 5.0 / 1024.0;
}
}));
}
Thread.Sleep(5000);
}
}
}
private void button6_Click(object sender, EventArgs e)
{
}
}
}
//第二種委托 更常用
方法四：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Threading;
using System.IO.Ports;
namespace serialPort_0620
{
public partial class Form4 : Form
{
public Form4()
{
InitializeComponent();
}
private void Form4_Load(object sender, EventArgs e)
{
string[] str = SerialPort.GetPortNames();
for (int i = 0; i < str.Length; i++)
{
comboBox1.Items.Add(str[i]);
}
button2.Enabled = false;
button3.Enabled = false;
button4.Enabled = false;
dataGridView1.Rows.Add(68);
//標序號
for (int i = 0; i < 69; i++)
{
dataGridView1.Rows[i].Cells[0].Value = i;
}
}
/// <summary>
/// 打開串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button1_Click(object sender, EventArgs e)
{
if (serialPort1.IsOpen)
{
MessageBox.Show("串口已打開");
}
else if (comboBox1.Text == "")
{
MessageBox.Show("請選擇端口！");
}
else if (textBox1.Text == "")
{
MessageBox.Show("請輸入波特率！");
}
else
{
serialPort1.PortName = comboBox1.Text;
serialPort1.BaudRate = Convert.ToInt16(textBox1.Text);
serialPort1.Open();
button1.Enabled = false;
button2.Enabled = true;
button3.Enabled = true;
button4.Enabled = true;
}
}
/// <summary>
/// 關閉串口
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button2_Click(object sender, EventArgs e)
{
serialPort1.Close();
button1.Enabled = true;
}
/// <summary>
/// 發送數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button3_Click(object sender, EventArgs e)
{
if (textBox1.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
serialPort1.WriteLine(textBox2.Text);
}
}
/// <summary>
/// 接收數據
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button4_Click(object sender, EventArgs e)
{
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
int a = listBox1.Items.Count;
listBox1.SelectedIndex = listBox1.Items.Count - 1;
}
//創建線程
Thread thread;
/// <summary>
/// 開始
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button5_Click(object sender, EventArgs e)
{
if (false == serialPort1.IsOpen)
{
MessageBox.Show("端口未打開");
}
else
{
thread = new Thread(new ThreadStart(PrintEven));
thread.Start();
}
}
private void PrintEven()
{
while (true)
{
if (textBox2.Text == "")
{
MessageBox.Show("請輸入要發送的數據");
}
else
{
if (serialPort1.IsOpen)
{
listBox1.Invoke(new Action(set));
}
Thread.Sleep(5000);
}
}
}
void set()
{
serialPort1.WriteLine(textBox2.Text);
string data = serialPort1.ReadLine();
listBox1.Items.Add(data);
listBox1.SelectedIndex = listBox1.Items.Count - 1;
for (int i = 0; i < 47; i++)
{
string[] result = data.Split(',');
dataGridView1.Rows[i].Cells[1].Value = result[i + 1];
dataGridView1.Rows[i].Cells[2].Value = Convert.ToDouble(result[i + 1]) * 5.0 / 1024.0;
}
}
/// <summary>
/// 結束
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button6_Click(object sender, EventArgs e)
{
thread.Abort();
}
}
}
//建立委托，invoke的第二種寫法
到此這篇關于c# 使用線程對串口serialPort進行收發數據(四種)的文章就介紹到這了,更多相關c# 串口serialPort收發數據內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
在本篇文章中小編給大家整理了關于c#在程序中定義和使用自定義事件方法總結相關知識點，需要的朋友們學習下。2019-03-03
WPF中下拉框可作選擇項也可以作為只讀文本框使用的方法
這篇文章主要給大家介紹了關于WPF中下拉框可以選擇項也可以作為只讀文本框使用的相關資料,文中通過實例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2023-02-02
目前最新的版本是C# 7.0，VS的最新版本為Visual Studio 2017 RC，兩者都尚未進入正式階段。C# 6.0雖說出了一段時間，但是似乎有許多人對這一塊知識并不了解。本文將對C# 6.0的知識進行梳理，下面跟著小編一起來看下吧2016-12-12
這篇文章主要介紹了C#采用OpenXml給Word文檔添加表格的方法,是OpenXml操作Word的一個非常實用的技巧,需要的朋友可以參考下2014-09-09
C#實現簡單的計算器小程序
這篇文章主要為大家詳細介紹了C#實現簡單的計算器小程序，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-01-01
C#實現系統桌面右下角彈框
這篇文章主要為大家詳細介紹了C#如何實現系統桌面右下角彈框，文中的示例代碼講解詳細，對我們學習C#有一定的幫助，感興趣的小伙伴可以跟隨小編一起了解一下2023-01-01
這篇文章介紹了使用C#中的Flags特性，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-07-07
這篇文章主要介紹了C#中使用Split方法拆分字符串實例,本文給出了使用一個分隔符和多個分隔符拆分字符串的例子,需要的朋友可以參考下2014-08-08
C#實現創建，刪除，查找，配置虛擬目錄實例詳解
這篇文章主要介紹了C#創建，刪除，查找，配置虛擬目錄的方法,以實例形式較為詳細的分析了C#針對虛擬目錄的創建、刪除、查找等相關技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-08-08
這篇文章主要介紹了C# 中Session的用法，文中講解非常細致，代碼幫助大家更好的理解和學習，感興趣的朋友可以了解下2020-07-07