Springboot啟動原理詳細講解
主啟動類方法:
@SpringBootApplication
public class MyJavaTestApplication {
public static void main(String[] args) {
SpringApplication.run(MyJavaTestApplication.class, args);
}
}點擊進入方法
public static ConfigurableApplicationContext run(Class<?>[] primarySources, String[] args) {
return new SpringApplication(primarySources).run(args);
}
先看看new SpringApplication(primarySources)里做了什么?
public SpringApplication(ResourceLoader resourceLoader, Class<?>... primarySources) {
this.resourceLoader = resourceLoader;
Assert.notNull(primarySources, "PrimarySources must not be null");
this.primarySources = new LinkedHashSet<>(Arrays.asList(primarySources));
//判斷當前web容器的類型,一般返回SERVLET,標識是web類型
this.webApplicationType = WebApplicationType.deduceFromClasspath();
//獲取META-INF/spring.factories文件中以//org.springframework.boot.Bootstrapper和
//org.springframework.boot.BootstrapRegistryInitializer為key的class
//創建對象,然后裝入對象屬性中;
this.bootstrapRegistryInitializers = getBootstrapRegistryInitializersFromSpringFactories();
setInitializers((Collection)
//獲取META-INF/spring.factories文件中以
//org.springframework.context.ApplicationContextInitializer的key的對
//存入到initializers集合屬性中;
getSpringFactoriesInstances(ApplicationContextInitializer.class));
//獲取META-INF/spring.factories文件中以
//org.springframework.context.ApplicationListener的key的對
//存入到listeners集合屬性中;
setListeners((Collection)
getSpringFactoriesInstances(ApplicationListener.class));
//找到main方法的啟動主類class對象賦值到對象屬性中。
this.mainApplicationClass = deduceMainApplicationClass();
}
spring.factories讀取了對外擴展的ApplicationContextInitializer ,ApplicationListener 對外擴展, 對類解耦(比如全局配置文件、熱部署插件)
所以我們可以利用這一特性,在容器加載的各個階段進行擴展。
上面讀取到的對象getSpringFactoriesInstances(ApplicationContextInitializer.class))
存入到initializers集合中的對象

getSpringFactoriesInstances(ApplicationListener.class));存入到listeners集合屬性中的對象

再看一下最重要的run方法:
public ConfigurableApplicationContext run(String... args) {
// 用來記錄當前springboot啟動耗時
StopWatch stopWatch = new StopWatch();
// 就是記錄了啟動開始時間
stopWatch.start();
//創建DefaultBootstrapContext bootstrapContext = new
//DefaultBootstrapContext();對象,然后循環執行上面文件中賦值的bootstrapRegistryInitializers集合中對象的方法,入?yún)⒕褪莃ootstrapContext對象,利用此處我們可以擴展改變bootstrapContext對象中的一項屬性值等,在這里還不知道此bootstrapContext對象的用處。
DefaultBootstrapContext bootstrapContext = createBootstrapContext();
// 它是任何spring上下文的接口, 所以可以接收任何ApplicationContext實現
ConfigurableApplicationContext context = null;
// 開啟了Headless模式,暫時不知道此模式的作用
configureHeadlessProperty();
//去spring.factroies中讀取了 org.springframework.boot.SpringApplicationRunListener為key的對象,默認是EventPublishingRunListener對象,然后封裝進SpringApplicationRunListeners 對象中,此對象還是比較有用的,用來發布springboot啟動進行中的各個狀態的事件,上面方法中讀取到的監聽器就可以監聽到這些事件,所以可以運用這些特性進行自己的擴展。
SpringApplicationRunListeners listeners = getRunListeners(args);
// 發布1.ApplicationStartingEvent事件,在運行開始時發送 ,發送springboot啟動開始事件;
listeners.starting(bootstrapContext, this.mainApplicationClass);
try {
//根據啟動項目命令所帶的參數創建applicationArguments 對象
ApplicationArguments applicationArguments = new DefaultApplicationArguments(args);
//初始化環境變量:讀取系統環境變量、發送了一個ApplicationEnvironmentPreparedEvent事件,利用相關監聽器來解析項目中配置文件中的配置,(EnvironmentPostProcessorApplicationListener
監聽器解析的配置文件)
ConfigurableEnvironment environment = prepareEnvironment(listeners, bootstrapContext, applicationArguments);
// 忽略beaninfo的bean
configureIgnoreBeanInfo(environment);
// 打印Banner 橫幅
Banner printedBanner = printBanner(environment);
//根據webApplicationType 容器類型,創建對應的spring上下文,一般是AnnotationConfigServletWebServerApplicationContext;
context = createApplicationContext();
//給spring上下文賦值DefaultApplicationStartup對象
context.setApplicationStartup(this.applicationStartup);
//預初始化上下文,這里做了給上下文添加environment對象,上面獲取到的initializers集合中的ApplicationContextInitializer對象執行其入?yún)樯舷挛膇nitialize方法,對上下文做編輯,所以此處我們可以做擴展;發送ApplicationContextInitializedEvent容器初始化事件;發送BootstrapContextClosedEvent事件;最重要的一個方法就是把啟動配置類注冊成了beanDefinition;發送ApplicationPreparedEvent事件,并把listeners集合屬性中的事件添加到上下文中;
prepareContext(bootstrapContext, context, environment, listeners, applicationArguments, printedBanner);
//刷新容器:和spring中的refresh()方法的作用是一樣的,主要的作用就是讀取所有的bean轉成beanDefinition然后再創建bean對象;不過這個容器重寫了其中的onRefresh()方法,在此方法中,創建了springboot內置的tomcat對象并進行啟動;接下來特別說明一下這個內置tomcat
refreshContext(context);
afterRefresh(context, applicationArguments);
stopWatch.stop();
//打印啟動時間;
if (this.logStartupInfo) {
new StartupInfoLogger(this.mainApplicationClass).logStarted(getApplicationLog(), stopWatch);
}
//發布容器啟動事件ApplicationStartedEvent;發布AvailabilityChangeEvent容器可用實踐;
listeners.started(context);
//執行容器中ApplicationRunner、ApplicationRunner類型對象的run方法
callRunners(context, applicationArguments);
}
catch (Throwable ex) {
handleRunFailure(context, ex, listeners);
throw new IllegalStateException(ex);
}
try {
//發布ApplicationReadyEvent容器已經正常事件;
listeners.running(context);
}
catch (Throwable ex) {
handleRunFailure(context, ex, null);
throw new IllegalStateException(ex);
}
return context;
}prepareEnvironment方法
private ConfigurableEnvironment prepareEnvironment(SpringApplicationRunListeners listeners,
ApplicationArguments applicationArguments) {
// 根據webApplicationType 創建Environment 創建就會讀?。?java環境變量和系統環境變量
ConfigurableEnvironment environment = getOrCreateEnvironment();
// 將命令行參數讀取環境變量中
configureEnvironment(environment, applicationArguments.getSourceArgs());
// 將@PropertieSource的配置信息 放在第一位, 因?yàn)樽x取配置文件@PropertieSource優先級是最低的
ConfigurationPropertySources.attach(environment);
// 發布了ApplicationEnvironmentPreparedEvent 的監聽器 讀取了全局配置文件
listeners.environmentPrepared(environment);
// 將所有spring.main 開頭的配置信息綁定SpringApplication
bindToSpringApplication(environment);
if (!this.isCustomEnvironment) {
environment = new EnvironmentConverter(getClassLoader()).convertEnvironmentIfNecessary(environment,
deduceEnvironmentClass());
}
//更新PropertySources
ConfigurationPropertySources.attach(environment);
return environment;
}lprepareContext
l預初始化上下文
private void prepareContext(ConfigurableApplicationContext context, ConfigurableEnvironment environment,
SpringApplicationRunListeners listeners, ApplicationArguments applicationArguments, Banner printedBanner) {
context.setEnvironment(environment);
postProcessApplicationContext(context);
// 拿到之前讀取到所有ApplicationContextInitializer的組件, 循環調用initialize方法
applyInitializers(context);
// 發布了ApplicationContextInitializedEvent
listeners.contextPrepared(context);
if (this.logStartupInfo) {
logStartupInfo(context.getParent() == null);
logStartupProfileInfo(context);
}
// 獲取當前spring上下文beanFactory (負責創建bean)
ConfigurableListableBeanFactory beanFactory = context.getBeanFactory();
beanFactory.registerSingleton("springApplicationArguments", applicationArguments);
if (printedBanner != null) {
beanFactory.registerSingleton("springBootBanner", printedBanner);
}
// 在Spring下 如果出現2個重名的bean, 則后讀取到的會覆蓋前面
// 在SpringBoot 在這里設置了不允許覆蓋, 當出現2個重名的bean 會拋出異常
if (beanFactory instanceof DefaultListableBeanFactory) {
((DefaultListableBeanFactory) beanFactory)
.setAllowBeanDefinitionOverriding(this.allowBeanDefinitionOverriding);
}
// 設置當前spring容器是不是要將所有的bean設置為懶加載
if (this.lazyInitialization) {
context.addBeanFactoryPostProcessor(new LazyInitializationBeanFactoryPostProcessor());
}
// Load the sources
Set<Object> sources = getAllSources();
Assert.notEmpty(sources, "Sources must not be empty");
// 讀取主啟動類,將它注冊為BD、就像我們以前register(啟動類);一個意思 (因?yàn)楹罄m(xù)要根據配置類解析配置的所有bean)
load(context, sources.toArray(new Object[0]));
//4.讀取完配置類后發送ApplicationPreparedEvent。
listeners.contextLoaded(context);
}
1.初始化SpringApplication 從spring.factories 讀取 listener ApplicationContextInitializer 。
2.運行run方法
3.讀取 環境變量 配置信息…
4.創建springApplication上下文:ServletWebServerApplicationContext
5.預初始化上下文 : 讀取啟動類
6.調用refresh 加載ioc容器
7.加載所有的自動配置類
8.創建servlet容器
9.ps.在這個過程中springboot會調用很多監聽器對外進行擴展
看一下內置tomcat如何啟動的:
Springboot的spring容器ServletWebServerApplicationContext對象重新了refresh()方法中的onRefresh()放用來啟動tomcat
@Override
protected void onRefresh() {
super.onRefresh();
try {
//創建tomcat
createWebServer();
}
catch (Throwable ex) {
throw new ApplicationContextException("Unable to start web server", ex);
}
}createWebServer創建tomcat的方法(也可以是Jetty,根據配置)
private void createWebServer() {
WebServer webServer = this.webServer;
ServletContext servletContext = getServletContext();
//如果servletContext 為null說明是內置tomcat,不為null,則使用的是外置tomcat,這個servletContext 是tomcat創建傳入的;
if (webServer == null && servletContext == null) {
StartupStep createWebServer = this.getApplicationStartup().start("spring.boot.webserver.create");
//獲取servlet容器創建工廠,tomcat的是TomcatServletWebServerFactory
ServletWebServerFactory factory = getWebServerFactory();
createWebServer.tag("factory", factory.getClass().toString());
//創建內置tomcat對象,并啟動;getSelfInitializer()這個方法也是很重要的,返回的是ServletWebServerApplicationContext#selfInitialize方法的引用函數,其作用是tomcat啟動時會回調此方法,并傳入servletContext對象,進行DispacherServlet添加到servletContext中,把當前spring容器和filter過濾器也添加到servletContext中
this.webServer = factory.getWebServer(getSelfInitializer());
createWebServer.end();
getBeanFactory().registerSingleton("webServerGracefulShutdown",
new WebServerGracefulShutdownLifecycle(this.webServer));
getBeanFactory().registerSingleton("webServerStartStop",
new WebServerStartStopLifecycle(this, this.webServer));
}
else if (servletContext != null) {
try {
getSelfInitializer().onStartup(servletContext);
}
catch (ServletException ex) {
throw new ApplicationContextException("Cannot initialize servlet context", ex);
}
}
initPropertySources();
}selfInitializ方法
private void selfInitialize(ServletContext servletContext) throws ServletException {
//把spring容器和servletContext進行相互引用
prepareWebApplicationContext(servletContext);
registerApplicationScope(servletContext);
WebApplicationContextUtils.registerEnvironmentBeans(getBeanFactory(), servletContext);
//servletContext中添加Dispacherservlet和多個fileter
for (ServletContextInitializer beans : getServletContextInitializerBeans()) {
beans.onStartup(servletContext);
}
}到此這篇關于Springboot啟動原理詳細講解的文章就介紹到這了,更多相關Springboot啟動原理內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
- Springboot詳解底層啟動過程
- SpringBoot超詳細分析啟動流程
- 詳解SpringBoot啟動代碼和自動裝配源碼分析
- SpringBoot圖文并茂帶你掌握devtools熱啟動
- SpringBoot中jar啟動下如何讀取文件路徑
- springboot項目啟動后執行方法的三種方式
- Springboot項目啟動到一半卡住了,不報錯問題及解決
- Springboot啟動后立即某個執行方法的四種方式
- 快速掌握SpringBoot應用的啟動入口
相關文章
Java 實戰范例之員工管理系統的實現
讀萬卷書不如行萬里路,只學書上的理論是遠遠不夠的,只有在實戰中才能獲得能力的提升,本篇文章手把手帶你用java+vue+Springboot+ssm+mysql+maven+redis實現一個前后端分離的員工管理系統,大家可以在過程中查缺補漏,提升水平2021-11-11
Java中java.lang.ClassCastException異常原因以及解決方法詳解
這篇文章主要給大家介紹了關于Java中java.lang.ClassCastException異常原因以及解決方法的相關資料,ClassCastException從字面上看是類型轉換錯誤,通常是進行強制類型轉換時候出的錯誤,需要的朋友可以參考下2024-02-02
基于斷點續傳下載原理的實現
下面小編就為大家?guī)硪黄跀帱c(diǎn)續傳下載原理的實現。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-09-09
阿里Druid數據連接池引發的線上異常解決
這篇文章主要為大家介紹了一次關于阿里Druid數據連接池引發的線上異常問題的解決方案,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步2022-03-03
java實現簡單的驗證碼功能
這篇文章主要為大家詳細介紹了java實現簡單的驗證碼功能,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2020-04-04
MAC算法之消息摘要算法HmacMD5的實現
這篇文章主要介紹了MAC算法之消息摘要算法HmacMD5的實現的相關資料,這里提供實例,幫助大家學習理解這部分知識,需要的朋友可以參考下2017-08-08
Java實現基于JDBC操作mysql數據庫的方法
這篇文章主要介紹了Java實現基于JDBC操作mysql數據庫的方法,結合實例形式分析了java使用JDBC實現針對mysql數據庫的連接、查詢、輸出等相關操作技巧,需要的朋友可以參考下2017-12-12

