前言

多線程一般用于同時調用多個函數，cpu時間片輪流分配給多個任務。 優點是提高cpu的使用率，使計算機減少處理多個任務的總時間；缺點是如果有全局變量，調用多個函數會使全局變量被多個函數修改，造成計算錯誤，這使需要使用join方法或者設置局部變量來解決問題。python使用threading模塊來實現多線程，threading.join()方法是保證調用join的子線程完成后，才會分配cpu給其他的子線程，從而保證線程運行的有序性。

一、多線程運行無序問題

我們首先創建三個實例，t1,t2,t3 t1實例調用function1函數，t2和t3函數調用function11函數，他們都是對全局變量l1進行操作

代碼如下：

import threading,time
l1 = []
#創建RLock鎖，acquire幾次，release幾次
lock = threading.RLock()
def function1(x,y):
    for i in range(x):
        l1.append(i)
        if i == 0:
            time.sleep(1)
    end_time = time.time()
    print("t{} is finished in {}s".format(y,end_time -time1 ))
def function11(x,y):
    for i in range(x):
        l1.append(i)
    end_time = time.time()
    print("t{} is finished in {}s".format(y, end_time -time1))
#2.創建子線程：thread類
if __name__ == '__main__':
    t1 = threading.Thread(target= function1, args = (100,1))
    t2 = threading.Thread(target= function11, args = (100,2))
    t3 = threading.Thread(target= function11, args = (100,3))
    time1 = time.time()
    print("time starts in {}".format(time1))
    t1.start()
    t2.start()
    t3.start()
    print(l1)

結果如下：

runfile('E:/桌面/temp.py', wdir='E:/桌面')
time starts in 1656474963.9487
t2 is finished in 0.0s
t3 is finished in 0.0s
[0, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99]
t1 is finished in 1.0152690410614014s

我們可以看到，全局變量中開頭有兩個0，而不是按著0，1，2，3的方式按序填充，所以可以得知全局變量在多線程中是被多個函數無序調用的。為了保證多線程有序調用全局變量，我們可以利用threading.join()的方法。

二、“join方法”解決多線程運行無序問題

我們重寫了function1函數，并命名為function2，t1調用function2函數。t2,t3不變。

代碼如下：

import threading,time
l1 = []
#創建RLock鎖，acquire幾次，release幾次
lock = threading.RLock()
def function1(x,y):
    for i in range(x):
        l1.append(i)
        if i == 0:
            time.sleep(1)
    end_time = time.time()
    print("t{} is finished in {}s".format(y,end_time -time1))
def function11(x,y):
    for i in range(x):
        l1.append(i)
    end_time = time.time()
    print("t{} is finished in {}s".format(y,end_time -time1))
def function2(x,y):
    for i in range(x):
        l1.append(i)
        if i == 0:
            time.sleep(1)
    end_time = time.time()
    print("t{} is finished in {}s".format(y,end_time -time1))
#2.創建子線程：thread類
if __name__ == '__main__':
    t1 = threading.Thread(target= function2, args = (100,1))
    t2 = threading.Thread(target= function11, args = (100,2))
    t3 = threading.Thread(target= function11, args = (100,3))
    time1 = time.time()
    print("time starts in {}".format(time1))
    t1.start()
    t1.join()
    t2.start()
    t3.start()
    print(l1)

結果如下:

runfile('E:/桌面/temp.py', wdir='E:/桌面')
time starts in 1656476057.441827
t1 is finished in 1.0155227184295654s
t2 is finished in 1.0155227184295654s
t3 is finished in 1.0155227184295654s
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99]

由此可見，threading.join()方法可以解決多線程無序問題

三、threading.Thread()的常用參數

1.group：默認值None，為了實現ThreadGroup類而保留
2.target：在start方法中調用的可調用對象，即需要開啟線程的可調用對象，比如函數、方法
3.name：默認為“Thread-N”，字符串形式的線程名稱
4.args：默認為空元組，參數target中傳入的可調用對象的參數元組
5.kwargs：默認為空字典{}，參數target中傳入的可調用對象的關鍵字參數字典
6.daemon：默認為None

總結

到此這篇關于多線程python的實現及多線程有序性的文章就介紹到這了,更多相關python多線程內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

最新評論