利用Pygame制作躲避僵尸游戲
更新時間：2022年05月30日 08:14:39 作者：我的天才女友
本文參考了神廟逃亡，利用Pygame實現一個人躲避僵尸的小游戲，主要的是精靈、精靈組之間相撞、相交的處理，感興趣的可以了解一下
游戲玩法
根據神廟逃亡，實現一個人躲避僵尸的小游戲，主要的是精靈、精靈組之間相撞、相交的處理。
游戲開始隨機出現一定的僵尸，隨機移動，玩家在一位置上，如果僵尸靠近玩家一定距離，則玩家持續掉血。玩家通過上下左右移動躲避僵尸，屏幕會隨機刷新一個加血包，玩家吃了就會加一定的血，并在此刷新血包。
property()
這個函數在類中返回新的屬性
property(get,set,del,doc)
參數如上所示，get、set、del分別是獲取設值刪除調用的，doc是描述的。
精靈類
在原來的精靈類中添加方向和屬性即可。
class MySprite(pygame.sprite.Sprite):
def __init__(self, target):
pygame.sprite.Sprite.__init__(self)
self.master_image = None
self.frame = 0
self.old_frame = -1
self.frame_width = 1
self.frame_height = 1
self.first_frame = 0
self.last_frame = 0
self.columns = 1
self.last_time = 0
self.direction = 0
self.classification = "玩家"
def load(self, filename, width, height, columns, direction, classification="玩家"):
# 精靈的屬性
self.classification = classification
# 方向
self.direction = direction
# 載入圖片
# 780 * 300
self.master_image = pygame.image.load(filename).convert_alpha() # 載入圖片
self.frame_width = width
self.frame_height = height
self.rect = Rect(0, 0, width, height)
self.columns = columns
rect = self.master_image.get_rect()
self.last_frame = (rect.width // width) * (rect.height // height) - 1
def update(self, current_time, rate=30): # current_time 更新頻率 為30
if current_time > self.last_time + rate: # 如果當前事件 大于 最后的時間 + 當前的節奏
self.frame += 1 # 當前的幀數加一
if self.frame > self.last_frame: # 當前最后一幀 則從第一幀開始
self.frame = self.first_frame # 從0開始
self.last_time = current_time # 將最后幀值為30
# build current frame only if it changed
if self.frame != self.old_frame: # 當前幀數不等于老的一幀
frame_x = (self.frame % self.columns) * self.frame_width
frame_y = (self.frame // self.columns) * self.frame_height
rect = (frame_x, frame_y, self.frame_width, self.frame_height) # 更新對應的位置
self.image = self.master_image.subsurface(rect) # 循環箱已有的方向
self.old_frame = self.frame
def __str__(self):
return str(self.frame) + "," + str(self.first_frame) + \
"," + str(self.last_frame) + "," + str(self.frame_width) + \
"," + str(self.frame_height) + "," + str(self.columns)
初始畫面
和原來一樣，先建立簡單的畫面。
import mySprite1
import pygame, sys, random
from pygame.locals import *
def print_text(font, x, y, text, color=(255, 255, 255)):
imgText = font.render(text, True, color)
screen.blit(imgText, (x, y))
# 設置窗口
pygame.init()
screen = pygame.display.set_mode((800, 600))
pygame.display.set_caption("勇闖后半夜")
font = pygame.font.Font(None, 30)
timer = pygame.time.Clock()
while True:
for event in pygame.event.get():
if event.type == QUIT:
sys.exit()
key = pygame.key.get_pressed()
if key[K_ESCAPE]:
sys.exit()
screen.fill((50, 50, 100))
pygame.display.update()
精靈移動函數
如果是僵尸遇到墻壁自動反方向走，根據方向改變對應的位置。
def reversal_direction(mySprite):
direction = mySprite.direction
if direction == 0:
direction = 4
elif direction == 2:
direction = 6
elif direction == 4:
direction = 0
elif direction == 6:
direction = 2
mySprite.direction = direction
def increment(mySprite, offset=1):
# 上下左右
direction = mySprite.direction
rect = mySprite.rect
if direction == 0:
rect.y -= offset
elif direction == 2:
rect.x += offset
elif direction == 4:
rect.y += offset
elif direction == 6:
rect.x -= offset
# 超出邊界的處理
# 超出邊界flg
boundary = False
if rect.x < 0:
rect.x = 0
boundary = True
if rect.x + mySprite.frame_width > 800:
rect.x = 800 - mySprite.frame_width
boundary = True
if rect.y < 0:
rect.y = 0
boundary = True
if rect.y + mySprite.frame_height > 600:
rect.y = 600 - mySprite.frame_height
boundary = True
# 如果超出邊界而且是僵尸的話 則反轉方向
if boundary and mySprite.classification == "僵尸":
reversal_direction(mySprite)
加載玩家
這個是素材的圖，如上所示，奇數行便是對應的方向移動。文件大小是768 * 768，可以分為96 * 96的8張。
加載玩家
# 玩家
play_group = pygame.sprite.Group()
play = mySprite1()
play.load("farmer walk.png", 96, 96, 8)
play.direction = -1
play_group.rect.x = 96
play_group.rect.y = 96
play_group.add(play)
play_group.update(ticks, 50)
screen.fill((50, 50, 100))
play_group.draw(screen)
pygame.display.update()
通過改變幀數修改，根據游戲的結束或是否移動，改變對應的事件
if not game_over:
play.first_frame = play.direction * play.columns
play.last_frame = play.first_frame + play.columns - 1
if play.frame < play.first_frame:
play.frame = play.first_frame
if not play_moving:
play.frame = play.first_frame = play.last_frame
else:
increment(play)
控制交互
if key[K_ESCAPE]:
sys.exit()
elif key[K_UP]:
play.direction = 0
play_moving = True
elif key[K_DOWN]:
play.direction = 4
play_moving = True
elif key[K_LEFT]:
play.direction = 6
play_moving = True
elif key[K_RIGHT]:
play.direction = 2
play_moving = True
else:
play_moving = False
添加僵尸
# 隨機生成20個僵尸
for n in range(0, 10):
zombie = MySprite()
random_direction = random.randint(0, 3) * 2
zombie.load("zombie walk.png", 96, 96, 8, random_direction, "僵尸")
zombie.rect.x = random.randint(0, 600)
zombie.rect.y = random.randint(0, 500)
print(zombie.rect)
zombie_group.add(zombie)
# 設置僵尸
for z in zombie_group:
z.first_frame = z.direction * z.columns
z.last_frame = z.first_frame + z.columns - 1
if z.frame < z.first_frame:
z.frame = z.first_frame
increment(z)
添加血包
血包就是單純的一個圖的展示。
health = MySprite()
health.load("health.png", 32, 32, 1)
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
health_group.add(health)
精靈相互碰撞事件
主要是僵尸和人 、人和血包之間的相撞事件
# 相撞事件
attack = None
attack = pygame.sprite.spritecollideany(play, zombie_group)
if attack is not None:
if pygame.sprite.collide_rect_ratio(0.5)(play, attack):
play_health -= 10
attack.rect.x = random.randint(0, 600)
attack.rect.y = random.randint(0, 500)
else:
attack = None
if pygame.sprite.collide_rect_ratio(0.5)(play, health):
play_health += 30
if play_health > 100:
play_health = 100
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
if play_health <= 0:
game_over = True
# 顯示血量
pygame.draw.rect(screen, (100, 200, 100, 180), Rect(300, 575, 200, 25))
pygame.draw.rect(screen, (50, 150, 150, 180), Rect(300, 575, play_health * 2, 25))
完整代碼
import pygame, sys, random
from pygame.locals import *
from mySprite1 import *
def print_text(font, x, y, text, color=(255, 255, 255)):
imgText = font.render(text, True, color)
screen.blit(imgText, (x, y))
def reversal_direction(mySprite):
direction = mySprite.direction
if direction == 0:
direction = 4
elif direction == 2:
direction = 6
elif direction == 4:
direction = 0
elif direction == 6:
direction = 2
mySprite.direction = direction
def increment(mySprite, offset=1):
# 上下左右
direction = mySprite.direction
rect = mySprite.rect
if direction == 0:
rect.y -= offset
elif direction == 2:
rect.x += offset
elif direction == 4:
rect.y += offset
elif direction == 6:
rect.x -= offset
# 超出邊界的處理
# 超出邊界flg
boundary = False
if rect.x < 0:
rect.x = 0
boundary = True
if rect.x + mySprite.frame_width > 800:
rect.x = 800 - mySprite.frame_width
boundary = True
if rect.y < 0:
rect.y = 0
boundary = True
if rect.y + mySprite.frame_height > 600:
rect.y = 600 - mySprite.frame_height
boundary = True
# 如果超出邊界而且是僵尸的話 則反轉方向
if boundary and mySprite.classification == "僵尸":
reversal_direction(mySprite)
# 設置窗口
pygame.init()
screen = pygame.display.set_mode((800, 600))
pygame.display.set_caption("勇闖后半夜")
font = pygame.font.Font(None, 30)
timer = pygame.time.Clock()
game_over = False
# 玩家
play_group = pygame.sprite.Group()
play = MySprite()
play.load("farmer walk.png", 96, 96, 8, 4)
play.rect.x = 96
play.rect.y = 96
play_moving = False
play_group.add(play)
play_health = 100
# 僵尸
zombie_group = pygame.sprite.Group()
# 隨機生成20個僵尸
for n in range(0, 10):
zombie = MySprite()
random_direction = random.randint(0, 3) * 2
zombie.load("zombie walk.png", 96, 96, 8, random_direction, "僵尸")
zombie.rect.x = random.randint(0, 600)
zombie.rect.y = random.randint(0, 500)
print(zombie.rect)
zombie_group.add(zombie)
# 血包
health_group = pygame.sprite.Group()
health = MySprite()
health.load("health.png", 32, 32, 1)
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
health_group.add(health)
while True:
# 設置執行的頻率
timer.tick(30)
ticks = pygame.time.get_ticks()
for event in pygame.event.get():
if event.type == QUIT:
sys.exit()
key = pygame.key.get_pressed()
if key[K_ESCAPE]:
sys.exit()
elif key[K_UP]:
play.direction = 0
play_moving = True
elif key[K_DOWN]:
play.direction = 4
play_moving = True
elif key[K_LEFT]:
play.direction = 6
play_moving = True
elif key[K_RIGHT]:
play.direction = 2
play_moving = True
else:
play_moving = False
if not game_over:
# 設置玩家
play.first_frame = play.direction * play.columns
play.last_frame = play.first_frame + play.columns - 1
if play.frame < play.first_frame:
play.frame = play.first_frame
# 設置僵尸
for z in zombie_group:
z.first_frame = z.direction * z.columns
z.last_frame = z.first_frame + z.columns - 1
if z.frame < z.first_frame:
z.frame = z.first_frame
increment(z)
if not play_moving:
play.frame = play.first_frame = play.last_frame
else:
increment(play)
# 相撞事件
attack = None
attack = pygame.sprite.spritecollideany(play, zombie_group)
if attack is not None:
if pygame.sprite.collide_rect_ratio(0.5)(play, attack):
play_health -= 10
attack.rect.x = random.randint(0, 600)
attack.rect.y = random.randint(0, 500)
else:
attack = None
if pygame.sprite.collide_rect_ratio(0.5)(play, health):
play_health += 30
if play_health > 100:
play_health = 100
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
if play_health <= 0:
game_over = True
play_group.update(ticks, 50)
zombie_group.update(ticks, 50)
health_group.update(ticks, 50)
screen.fill((50, 50, 100))
play_group.draw(screen)
zombie_group.draw(screen)
health_group.draw(screen)
# 顯示血量
pygame.draw.rect(screen, (100, 200, 100, 180), Rect(300, 575, 200, 25))
pygame.draw.rect(screen, (50, 150, 150, 180), Rect(300, 575, play_health * 2, 25))
if game_over:
print_text(font, 300, 100, "GAME OVER!!!")
pygame.display.update()
到此這篇關于利用Pygame制作躲避僵尸游戲的文章就介紹到這了,更多相關Pygame躲避僵尸游戲內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要介紹了Python 讀寫 Matlab Mat 格式數據的操作，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-05-05
爬蟲代理池Python3WebSpider源代碼測試過程解析
這篇文章主要介紹了爬蟲代理池Python3WebSpider源代碼測試過程解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2019-12-12
淺談Python生成器generator之next和send的運行流程(詳解)
下面小編就為大家?guī)硪黄獪\談Python生成器generator之next和send的運行流程(詳解)。小編覺得挺不錯的，現在就分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2017-05-05
今天我們要說的是面向對象的核心-----類,類能幫我們把復雜的事情變得有條理,有順序,希望大家通過學習類能改善自己的編碼風格,使代碼變得更為好看,更加通俗易懂,需要的朋友可以參考下2021-05-05
這篇文章主要介紹了python-try-except:pass的用法及說明，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-12-12
在編寫程序的過程中,經常需要進行格式化輸出,每次用每次查,干脆就在這里整理一下,下面這篇文章主要給大家介紹了關于python字符串格式化的相關資料,分別是%格式符和format方式,需要的朋友可以參考下2022-03-03
這篇文章主要介紹了python實現plt x軸坐標按1刻度顯示，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-07-07
pandas分組聚合(agg,transform,apply)
在SQL中我們經常使用 GROUP BY 將某個字段,按不同的取值進行分組, 在pandas中也有groupby函數,本文主要介紹了pandas分組聚合(agg,transform,apply),具有一定的參考價值,感興趣的可以了解一下2024-04-04
這篇文章主要為大家介紹了Python區塊鏈塊的添加教程詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-05-05
這篇文章主要介紹了Django session登陸并獲取值的實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-03-03