Python使用PyAudio制作錄音工具的實現代碼

更新時間：2022年04月22日 12:03:58 作者：宿者朽命

這篇文章主要介紹了Python使用PyAudio制作錄音工具,音頻錄制與視頻錄制相似，也是以數據幀的方式錄制保存，這次使用強大的第三方包PyAudio和內置的wave模塊編寫，需要的朋友可以參考下

應用平臺

windows 10
python 3.7

音頻錄制部分

音頻錄制與視頻錄制相似，也是以數據幀的方式錄制保存，這次使用強大的第三方包PyAudio和內置的wave模塊編寫主要部分代碼：

pip install PyAudio

如果出現安裝失敗，可點擊去此處下載對應.whl文件，cp37代表python3.7環境，64代表64位操作系統。
假如不是下載對應的whl包會導致安裝失敗，下載完成后，cmd窗口下進入whl的所在目錄，使用pip install PyAudio-xx.whl即可完成安裝。

pyaudio.whl

音頻錄制主要代碼：

from pyaudio import PyAudio, paInt16, paContinue, paComplete

# 設置固定參數
chunk = 1024  # 每個緩沖區的幀數
format_sample = paInt16  # 采樣位數
channels = 2  # 聲道： 1，單聲道；2，雙聲道
fps = 44100  # 采樣頻率
# 這里采用回調的方式錄制音頻
def callback(in_data, frame_count, time_info, status):
    """錄制回調函數"""
    wf.writeframes(in_data)
    if xx:  # 當某某條件滿足時
        return in_data, paContinue
    else:
        return in_data, paComplete
# 實例化PyAudio
p = PyAudio()
stream = p.open(format=format_sample,
				channels=channels,
				rate=fps,
                frames_per_buffer=chunk,
                input=True,
                input_device_index=None,  # 輸入設備索引, None為默認設備
                stream_callback=callback   # 回調函數
                )
# 開始流錄制
stream.start_stream()
# 判斷流是否活躍
while stream.is_active():
	time.sleep(0.1)    # 0.1為靈敏度
# 錄制完成，關閉流及實例
stream.stop_stream()
stream.close()
p.terminate()

采取流式并用回調函數錄制，需要先定義保存音頻文件，用wave新建音頻二進制文件：

import wave
wf = wave.open('test.wav', 'wb')
wf.setnchannels(channels)
wf.setsampwidth(p.get_sample_size(format_sample))
wf.setframerate(fps)

為了后續代碼可以很好的與之結合復用，將上面的代碼包裝成類

from pyaudio import PyAudio
class AudioRecord(PyAudio):
    def __init__(self,):

源碼于文末補充。

音頻播放部分

播放部分代碼與錄制部分代碼相差不大，核心部分：

wf = wave.open('test.wav', 'rb')
def callback(in_data, frame_count, time_info, status):
	data = wf.readframes(frame_count)
	return data, paContinue
stream = p.open(format=p.get_format_from_width(wf.getsampwidth()),
				channels=wf.getnchannels(),
                rate=wf.getframerate(),
				output=True,
				output_device_index=output_device_index,  # 輸入設備索引
				stream_callback=callback  # 輸出用回調函數
                )
stream.start_stream()
while stream.is_active():
	time.sleep(0.1)

目前暫時測試了.wav和.mp3格式可以正常錄制及播放，其它類型格式音頻可以自行調用代碼進行測試。

GUI窗口所需屬性值代碼部分

考慮到GUI窗口能較為人性化的輸出及輸入值，編寫該部分代碼，內容含音頻時長及獲取輸入設備及輸出設備。

# 音頻時長
duration = wf.getnframes() / wf.getframerate()

# 獲取系統目前已安裝的輸入輸出設備
dev_info = self.get_device_info_by_index(i)
default_rate = int(dev_info['defaultSampleRate'])
if not dev_info['hostApi'] and default_rate == fps and '映射器' not in dev_info['name']:
	if dev_info['maxInputChannels']:
		print('輸入設備：', dev_info['name'])
	elif dev_info['maxOutputChannels']:
		print('輸出設備：', dev_info['name'])

pynput監聽鍵盤

在這部分代碼也暫時使用pynput監聽鍵盤來對錄音做中斷處理?？梢哉{(diào)用上一篇文章中的鍵盤監聽代碼。

def hotkey(self):
    """熱鍵監聽"""
    with keyboard.Listener(on_press=self.on_press) as listener:
        listener.join()

def on_press(self, key):
    try:
        if key.char == 't':  # t鍵，錄制結束，保存音頻
            self.flag = True
        elif key.char == 'k':  # k鍵，錄制中止，刪除文件
            self.flag = True
            self.kill = True
    except Exception as e:
        print(e)

功能與上一篇類似，不再贅述。

總結

以上就是使用PyAudio調用windows的音頻設備進行錄制及播放，整體學習了使用類及其繼承相關知識，用法在這只是展示了冰山一角，還有更多的知識等待著我們一起去探索！

于二零二一年十二月二十日作

源碼:

import wave
import time
from pathlib import Path
from threading import Thread
from pyaudio import PyAudio, paInt16, paContinue, paComplete
from pynput import keyboard  # pip install pynput

class AudioRecord(PyAudio):
    def __init__(self, channels=2):
        super().__init__()
        self.chunk = 1024  # 每個緩沖區的幀數
        self.format_sample = paInt16  # 采樣位數
        self.channels = channels  # 聲道： 1，單聲道；2，雙聲道
        self.fps = 44100  # 采樣頻率
        self.input_dict = None
        self.output_dict = None
        self.stream = None
        self.filename = '~test.wav'
        self.duration = 0   # 音頻時長
        self.flag = False
        self.kill = False
    def __call__(self, filename):
        """重載文件名"""
        self.filename = filename
    def callback_input(self, in_data, frame_count, time_info, status):
        """錄制回調函數"""
        self.wf.writeframes(in_data)
        if not self.flag:
            return in_data, paContinue
        else:
            return in_data, paComplete
    def callback_output(self, in_data, frame_count, time_info, status):
        """播放回調函數"""
        data = self.wf.readframes(frame_count)
        return data, paContinue
    def open_stream(self, name):
        """打開錄制流"""
        input_device_index = self.get_device_index(name, True) if name else None
        return self.open(format=self.format_sample,
                         channels=self.channels,
                         rate=self.fps,
                         frames_per_buffer=self.chunk,
                         input=True,
                         input_device_index=input_device_index,  # 輸入設備索引
                         stream_callback=self.callback_input
                         )
    def audio_record_run(self, name=None):
        """音頻錄制"""
        self.wf = self.save_audio_file(self.filename)
        self.stream = self.open_stream(name)
        self.stream.start_stream()
        while self.stream.is_active():
            time.sleep(0.1)
        self.wf.close()
        if self.kill:
            Path(self.filename).unlink()
        self.duration = self.get_duration(self.wf)
        print(self.duration)
        self.terminate_run()
    def run(self, filename=None, name=None, record=True):
        """音頻錄制線程"""
        thread_1 = Thread(target=self.hotkey, daemon=True)
        if record:
            # 錄制
            if filename:
                self.filename = filename
            thread_2 = Thread(target=self.audio_record_run, args=(name,))
            # 播放
            if not filename:
                raise Exception('未輸入音頻文件名，不能播放，請輸入后再試！')
            thread_2 = Thread(target=self.read_audio, args=(filename, name,))
        thread_1.start()
        thread_2.start()
    def read_audio(self, filename, name=None):
        """音頻播放"""
        output_device_index = self.get_device_index(name, False) if name else None
        with wave.open(filename, 'rb') as self.wf:
            self.duration = self.get_duration(self.wf)
            self.stream = self.open(format=self.get_format_from_width(self.wf.getsampwidth()),
                                    channels=self.wf.getnchannels(),
                                    rate=self.wf.getframerate(),
                                    output=True,
                                    output_device_index=output_device_index,  # 輸出設備索引
                                    stream_callback=self.callback_output
                                    )
            self.stream.start_stream()
            while self.stream.is_active():
                time.sleep(0.1)
    @staticmethod
    def get_duration(wf):
        """獲取音頻時長"""
        return round(wf.getnframes() / wf.getframerate(), 2)
    def get_in_out_devices(self):
        """獲取系統輸入輸出設備"""
        self.input_dict = {}
        self.output_dict = {}
        for i in range(self.get_device_count()):
            dev_info = self.get_device_info_by_index(i)
            default_rate = int(dev_info['defaultSampleRate'])
            if not dev_info['hostApi'] and default_rate == self.fps and '映射器' not in dev_info['name']:
                if dev_info['maxInputChannels']:
                    self.input_dict[dev_info['name']] = i
                elif dev_info['maxOutputChannels']:
                    self.output_dict[dev_info['name']] = i
    def get_device_index(self, name, input_in=True):
        """獲取選定設備索引"""
        if input_in and self.input_dict:
            return self.input_dict.get(name, -1)
        elif not input_in and self.output_dict:
            return self.output_dict.get(name, -1)
    def save_audio_file(self, filename):
        """音頻文件保存"""
        wf = wave.open(filename, 'wb')
        wf.setnchannels(self.channels)
        wf.setsampwidth(self.get_sample_size(self.format_sample))
        wf.setframerate(self.fps)
        return wf
    def terminate_run(self):
        """結束流錄制或流播放"""
        if self.stream:
            self.stream.stop_stream()
            self.stream.close()
        self.terminate()
    def hotkey(self):
        """熱鍵監聽"""
        with keyboard.Listener(on_press=self.on_press) as listener:
            listener.join()
    def on_press(self, key):
        try:
            if key.char == 't':  # t鍵，錄制結束，保存音頻
                self.flag = True
            elif key.char == 'k':  # k鍵，錄制中止，刪除文件
                self.kill = True
        except Exception as e:
            print(e)
if __name__ == '__main__':
    audio_record = AudioRecord()
    audio_record.get_in_out_devices()
    # 錄制
    print(audio_record.input_dict)
    audio_record.run('test.mp3')
    # 播放
    print(audio_record.output_dict)
    audio_record.run('test.mp3', record=False)

到此這篇關于Python使用PyAudio制作錄音工具的文章就介紹到這了,更多相關Python PyAudio錄音工具內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: