spring-boot-starter-validation?校驗參數的實現

更新時間：2022年04月13日 15:57:35 作者：_lemonV

參數校驗在很多地方都可以用到，本文主要介紹了spring-boot-starter-validation?校驗參數的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

一、前言

本章介紹使用spring-boot-starter-validation 校驗 SpringMVC 的入?yún)ⅰ?/p>

	<parent>
		<groupId>org.springframework.boot</groupId>
		<artifactId>spring-boot-starter-parent</artifactId>
		<version>2.5.2</version>
		<relativePath/> <!-- lookup parent from repository -->
	</parent>
	
		<dependency>
			<groupId>org.springframework.boot</groupId>
			<artifactId>spring-boot-starter-validation</artifactId>
		</dependency>

二、常用注解

三、定義分組

用于分組校驗。
使用場景，對同一個對象例如User(username , id) 在不同的接口時 需要的校驗規則不同。
例如，訪問一個接口需要 username 不為null且長度大于0 ，id>=0 ；訪問另一個接口需要 username 參數的長度在 [1,3]之間。

public class ValidateGroup {
    public interface FirstGroup {
    }

    public interface SecondeGroup {
    }

    public interface ThirdGroup {
    }
}

四、定義需要校驗的對象

import javax.validation.constraints.Min;
import javax.validation.constraints.NotEmpty;
import javax.validation.constraints.Size;
import lombok.Data;

@Data
public class User {
	@NotEmpty(message = "用戶名不能為空")
	@Size(message = "用戶名長度 [1-3] ", min = 1, max = 3,groups = ValidateGroup.FirstGroup.class)
	private String username;
	@Min(message = "id不得小于0", value = 0)
	private Integer id;

}

五、在handler 即 Controller中校驗

import org.springframework.web.bind.annotation.PostMapping;
import org.springframework.web.bind.annotation.RequestBody;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;
import com.nbpicc.controller.ValidateGroup.FirstGroup;

@RestController
@RequestMapping("/")
public class TestController {

	@PostMapping("test3")
	public User test3(@RequestBody @Validated({ FirstGroup.class }) User u) {
		System.out.println(u);
		return u;
	}

	@PostMapping("test4")
	public User test4(@Validated User u) {
		System.out.println(u);
		return u;
	}

}

校驗失敗，會直接拋出異常。這樣不太友好，可以使用@ControllerAdvice處理全局異常。

六、定義全局異常處理類

import java.util.List;
import org.springframework.validation.BindException;
import org.springframework.validation.BindingResult;
import org.springframework.validation.FieldError;
import org.springframework.web.bind.MethodArgumentNotValidException;
import org.springframework.web.bind.annotation.ExceptionHandler;
import org.springframework.web.bind.annotation.RestControllerAdvice;
import lombok.extern.slf4j.Slf4j;

@Slf4j
@RestControllerAdvice
public class GlobalExceptionHandler {

	@ExceptionHandler(value = BindException.class)
	public JsonResult exceptionHandle(BindException exception) {

		BindingResult result = exception.getBindingResult();
		StringBuilder errorMsg = new StringBuilder();

		List<FieldError> fieldErrors = result.getFieldErrors();
		fieldErrors.forEach(error -> {
			log.error("field: " + error.getField() + ", msg:" + error.getDefaultMessage());
			errorMsg.append(error.getDefaultMessage()).append("!");
		});
		return JsonResult.fail(errorMsg.toString());
	}

	@ExceptionHandler(value = MethodArgumentNotValidException.class)
	public JsonResult MyExceptionHandle(MethodArgumentNotValidException exception) {

		BindingResult result = exception.getBindingResult();
		StringBuilder errorMsg = new StringBuilder();

		List<FieldError> fieldErrors = result.getFieldErrors();
		fieldErrors.forEach(error -> {
			log.error("field: " + error.getField() + ", msg:" + error.getDefaultMessage());
			errorMsg.append(error.getDefaultMessage()).append("!");
		});

		return JsonResult.fail(errorMsg.toString());
	}

	// 處理運行時異常
	@ExceptionHandler(RuntimeException.class)
	public JsonResult doHandleRuntimeException(RuntimeException e) {
		log.error(e.getMessage(), e);
		e.printStackTrace();
		return JsonResult.fail(e.getMessage());
	}
}

另外JsonResult.java用于接口返回統一個json格式

import com.fasterxml.jackson.annotation.JsonInclude;

import lombok.AllArgsConstructor;
import lombok.Data;
import lombok.NoArgsConstructor;
import lombok.experimental.Accessors;

/**
 *@author wang 
 *@Date 2020-9-14
 * 
 **/

@Data
@Accessors(chain = true)
@NoArgsConstructor
@AllArgsConstructor 
@JsonInclude(JsonInclude.Include.NON_NULL)
public class JsonResult<T>  {
		/** 成功 */	
		public static final int SUCCESS=200;
		/**內部服務器錯誤**/
		public static final int FAIL=500;
	    /** 沒有登錄 */
	    public static final int NOT_LOGIN = 400;
	    /** 發生異常 */
	    public static final int EXCEPTION = 401;
	    /** 系統錯誤 */
	    public static final int SYS_ERROR = 402;
	    /** 參數錯誤 */
	    public static final int PARAMS_ERROR = 403;
	    /** 不支持或已經廢棄 */
	    public static final int NOT_SUPPORTED = 410;
	    /** AuthCode錯誤 */
	    public static final int INVALID_AUTHCODE = 444;
	    /** 太頻繁的調用 */
	    public static final int TOO_FREQUENT = 445;
	    /** 未知的錯誤 */
	    public static final int UNKNOWN_ERROR = 499;
		
		private Integer code;  
        private String msg;
        private T data;
        
        public static JsonResult fail() {
            return new JsonResult(FAIL, "請求處理失敗",null);
        }
        public static JsonResult fail(String msg) {
            return new JsonResult(FAIL, msg,null);
        }
        public static JsonResult fail(Integer code,String msg) {
            return new JsonResult(code, msg,null);
        }
        public static JsonResult success() {
            return new JsonResult(SUCCESS,"請求處理成功",null);
        }
        public static JsonResult success(String msg) {
            return new JsonResult(SUCCESS,msg,null);
        }
        public static <T> JsonResult success(T data) {
            return new JsonResult<T> (SUCCESS,"請求處理成功",data);
        }
        public static <T>  JsonResult success(String msg,T data) {
            return new JsonResult<T>(SUCCESS, msg,data);
        }
        

        
        public static JsonResult err() {
            return build(EXCEPTION);
        }
        public static JsonResult err(String msg) {
            return build(EXCEPTION, msg);
        }
        
	
        public JsonResult<T> code(int code) {
            this.code = code;
            return this;
        }
        public JsonResult<T> msg(String msg) {
            this.msg = msg;
            return this;
        }
        public JsonResult<T> data(T data) {
            this.data = data;
            return this;
        }
        
        
        public static JsonResult build() {
            return new JsonResult();
        }
        public static JsonResult build(int code) {
            return new JsonResult().code(code);
        }
        public static JsonResult build(int code, String msg) {
            return new JsonResult<String>().code(code).msg(msg);
        }
        public static <T> JsonResult<T> build(int code, T data) {
            return new JsonResult<T>().code(code).data(data);
        }
        public static <T> JsonResult<T> build(int code, String msg, T data) {
            return new JsonResult<T>().code(code).msg(msg).data(data);
        }
        
        
}

當然還有其他異常處理方式可以參考：http://m.fzitv.net/article/244379.htm

七、測試效果

八、嵌套對象的校驗

import lombok.Data;

import javax.validation.Valid;
import javax.validation.constraints.*;

@Data
public class User {
    @NotEmpty(message = "用戶名不能為空")
    @Size(message = "長度 [1-3] ", min = 1, max = 3, groups = ValidateGroup.FirstGroup.class)
    private String username;

    @Min(message = "id不得小于0", value = 0)
    private Integer id;
    
    @NotBlank(message = "地址不能為空", groups = {ValidateGroup.ThirdGroup.class, ValidateGroup.SecondeGroup.class})
    private String address;

    //在內部屬性是自定義對象的時候添加 @Valid 注解 ，即可開啟對In對象的校驗。 
    //記得添加@NotNull注解，否則該對象可以為null，并且此時In對象的校驗規則也不會拋出異常 。
    @Valid
    @NotNull(message = "In 對象不能為null ", groups = {ValidateGroup.ThirdGroup.class, ValidateGroup.SecondeGroup.class})
    private In in;
}

/**
 *自定義的對象，User對象中的一個屬性。
 */
@Data
public class In {

    @NotBlank(message = "str不能為空", groups = {ValidateGroup.ThirdGroup.class, ValidateGroup.SecondeGroup.class})
    private String str;
}

九、自定義注解（自定義校驗規則）

9.1 實現ConstraintValidator接口

import javax.validation.ConstraintValidator;
import javax.validation.ConstraintValidatorContext;

public class WordConstraintValidator implements ConstraintValidator<CustomValidaor, Object> {
	@Override
	public boolean isValid(Object value, ConstraintValidatorContext context) {
		// 具體的校驗規則
		return value.toString().length() == 10;
	}
}

9.2 自定義注解

import java.lang.annotation.ElementType;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;

import javax.validation.Constraint;
import javax.validation.Payload;

@Target({ ElementType.METHOD, ElementType.FIELD })
@Retention(RetentionPolicy.RUNTIME)
@Constraint(validatedBy = WordConstraintValidator.class)
public @interface CustomValidaor {

	String message();

	// groups 和 payload 這兩個parameter 必須包含,不然會報錯
	Class<?>[] groups() default {};

	Class<? extends Payload>[] payload() default {};

}

9.3 使用

@Data
public class Inner {
	@NotBlank(message = "str不能為空", groups = { ValidateGroup.ThirdGroup.class, ValidateGroup.SecondeGroup.class })
	@CustomValidaor(message = "長度必須為10", groups = { ValidateGroup.ThirdGroup.class, ValidateGroup.SecondeGroup.class })
	private String str;
}

9.4測試

訪問接口

@PostMapping("test6")
public User test6(@Validated({ValidateGroup.SecondeGroup.class}) @RequestBody User u) {
System.out.println(u);
return u;
}

到此這篇關于spring-boot-starter-validation 校驗參數的實現的文章就介紹到這了,更多相關spring-boot-starter-validation 校驗參數內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: