python自定義封裝帶顏色的logging模塊
python 自定義封裝帶顏色的logging模塊
自己在搭建python接口自動化框架 分享一些內容過程中想自己封裝一個logger方法 根據logging進行二次封裝 代碼如下
import logging
import os
import time
import colorlog
from logging.handlers import RotatingFileHandler
# 創建文件目錄
cur_path = os.path.dirname(os.path.realpath(__file__)) # log_path是存放日志的路徑
log_path = os.path.join(os.path.dirname(cur_path), 'logs')
if not os.path.exists(log_path): os.mkdir(log_path) # 如果不存在這個logs文件夾,就自動創建一個
# 修改log保存位置
timestamp = time.strftime("%Y-%m-%d", time.localtime())
logfile_name = '%s.log' % timestamp
logfile_path = os.path.join(log_path, logfile_name)
# 定義不同日志等級顏色
log_colors_config = {
'DEBUG': 'bold_cyan',
'INFO': 'bold_green',
'WARNING': 'bold_yellow',
'ERROR': 'bold_red',
'CRITICAL': 'red',
}
class Logger(logging.Logger):
def __init__(self, name, level='DEBUG', file=None, encoding='utf-8'):
super().__init__(name)
self.encoding = encoding
self.file = file
self.level = level
# 針對所需要的日志信息 手動調整顏色
formatter = colorlog.ColoredFormatter(
'%(log_color)s%(levelname)1.1s %(asctime)s %(reset)s| %(message_log_color)s%(levelname)-8s %(reset)s| %('
'log_color)s[%(filename)s%(reset)s:%(log_color)s%(module)s%(reset)s:%(log_color)s%(funcName)s%('
'reset)s:%(log_color)s%(''lineno)d] %(reset)s- %(white)s%(message)s',
reset=True,
log_colors=log_colors_config,
secondary_log_colors={
'message': {
'DEBUG': 'blue',
'INFO': 'blue',
'WARNING': 'blue',
'ERROR': 'red',
'CRITICAL': 'bold_red'
}
},
style='%'
) # 日志輸出格式
# 創建一個FileHandler,用于寫到本地
rotatingFileHandler = logging.handlers.RotatingFileHandler(filename=logfile_path,
maxBytes=1024 * 1024 * 50,
backupCount=5)
rotatingFileHandler.setFormatter(formatter)
rotatingFileHandler.setLevel(logging.DEBUG)
self.addHandler(rotatingFileHandler)
# 創建一個StreamHandler,用于輸出到控制臺
console = colorlog.StreamHandler()
console.setLevel(logging.DEBUG)
console.setFormatter(formatter)
self.addHandler(console)
self.setLevel(logging.DEBUG)
logger = Logger(name=logfile_path, file=logfile_path)
使用時我們只需要引入封裝好的類就行 直觀美麗大方~
# 引入封裝好的logger模塊
from common.logger_handler import logger
def physical_strength(self, abnormal):
"""兌換體力異常通用方法"""
if self.attrs.__contains__('costType'):
attrs_Type = {
"costType": abnormal,
"count": self.attrs["count"]
}
response_Type = r().response(self.send_uid, self.code, self.event, attrs_Type)
# 使用時直接調用logger.info()就行
logger.info(f"physical_strength_{abnormal},response_Type:{response_Type}")
assert response_Type["code"] != 0
time.sleep(2)
attrs_count = {
"costType": self.attrs["costType"],
"count": abnormal
}
response_count = r().response(self.send_uid, self.code, self.event, attrs_count)
logger.info(f"physical_strength_{abnormal},response_count:{response_count}")
assert response_count["code"] != 0
time.sleep(2)
attrs_all = {
"costType": abnormal,
"count": abnormal
}
response_all = r().response(self.send_uid, self.code, self.event, attrs_all)
logger.info(f"physical_strength_{abnormal},response_all:{response_all}")
assert response_all["code"] != 0
time.sleep(2)
else:
attrs_count = {
"count": abnormal
}
response_count = r().response(self.send_uid, self.code, self.event, attrs_count)
logger.info(f"physical_strength_{abnormal},response_count:{response_count}")
assert response_count["code"] != 0
time.sleep(2)
效果:按照 日期/時間/日志等級/文件名稱/類/方法名稱/代碼行數展示(這里可以自己手動調整formatter參數 如果感覺展示太長的話)
%(levelno)s: 打印日志級別的數值
%(levelname)s: 打印日志級別名稱
%(pathname)s: 打印當前執行程序的路徑,其實就是sys.argv[0]
%(filename)s: 打印當前執行程序名
%(funcName)s: 打印日志的當前函數
%(lineno)d: 打印日志的當前行號
%(asctime)s: 打印日志的時間
%(thread)d: 打印線程ID
%(threadName)s: 打印線程名稱
%(process)d: 打印進程ID
%(message)s: 打印日志信息

避坑:不要用這種方式去調用日志等級方法 會出現日志打印定位路徑錯誤 只能定位在log封裝類當前方法下
def debug(self, message):
self.__console('debug', message)
def info(self, message):
self.__console('info', message)
def warning(self, message):
self.__console('warning', message)
def error(self, message):
self.__console('error', message)
到此這篇關于python自定義封裝帶顏色的logging模塊的文章就介紹到這了,更多相關python logging模塊內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
python計數排序和基數排序算法實例
這篇文章主要介紹了python計數排序和基數排序算法實例,需要的朋友可以參考下2014-04-04
Python通用唯一標識符uuid模塊使用案例
這篇文章主要介紹了Python通用唯一標識符uuid模塊使用案例,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-09-09
Python實現計算長方形面積(帶參數函數demo)
今天小編就為大家分享一篇Python實現計算長方形面積(帶參數函數demo),具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2020-01-01
Python文本轉語音引擎pyttsx3的使用完全指南
在開發需要語音輸出功能的應用時,文本轉語音技術是一個非常有用的工具,Python的pyttsx3庫提供了一個簡單且離線的方式來實現這一功能,下面小編就來和大家介紹一下pyttsx3的具體使用吧2025-04-04
Python數字圖像處理代數之加減乘運算
這篇文章主要介紹了Python數字圖像處理代數運算,對其中的加、減、乘運算分別作了詳細的講解,有需要的朋友可以借鑒參考下,希望能夠有所幫助2021-09-09
基于python中staticmethod和classmethod的區別(詳解)
下面小編就為大家?guī)硪黄趐ython中staticmethod和classmethod的區別(詳解)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-10-10
Windows下Python的Django框架環境部署及應用編寫入門
這篇文章主要介紹了Windows下Python的Django框架環境部署及程序編寫入門,Django在Python的框架中算是一個重量級的MVC框架,本文將從程序部署開始講到hellow world web應用的編寫,需要的朋友可以參考下2016-03-03
如何使用python數據處理解決數據沖突和樣本的選取
這篇文章主要介紹了如何使用python數據處理解決數據沖突和樣本的選取,其中主要包括 實際業務數據沖突、樣本選取問題、數據共線性等思路2021-08-08

