快捷導航

RabbitMQ?延遲隊列實現訂單支付結果異步階梯性通知(實例代碼)

更新時間：2022年02月17日 11:49:06 作者：星朝

這篇文章主要介紹了RabbitMQ?延遲隊列實現訂單支付結果異步階梯性通知,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下

在第三方支付中，例如支付寶、或者微信，對于訂單請求，第三方支付系統采用的是消息同步返回、異步通知+主動補償查詢的補償機制。

由于互聯網通信的不可靠性，例如雙方網絡、服務器、應用等因素的影響，不管是同步返回、異步通知、主動查詢報文都可能出現超時無響應、報文丟失等情況，所以像支付業務，對結果的通知一般采用幾種方案結合的補償機制，不能完全依賴某一種機制。
例如一個支付結果的通知，一方面會在支付頁面跳轉時候返回支付結果（一般只用作前端展示使用，非最終狀態），同時會采用后臺異步通知機制（有前臺、后臺通知的，以后臺異步通知結果為準），但由于前臺跳轉、后臺結果通知都可能失效，因此還以定時補單+請求方主動查詢接口作為輔助手段。

常見的補單操作，任務調度策略一般設定30秒、60秒、3分鐘、6分鐘、10分鐘調度多次（以自己業務需要），如果調度接收到響應確認報文，補單成功，則中止對應訂單的調度任務；如果超過補單上限次數，則停止補單，避免無謂的資源浪費。請求端隨時可以發起請求報文查詢對應訂單的狀態。在日常開發中，對于網站前端來說，支付計費中心對于訂單請求信息的處理也是通過消息同步返回、異步通知+主動補償查詢相結合的機制，其中對于訂單的異步通知，目前的通知策略為3s、30s、60s、120s、180、300s的階梯性通知。返回成功情況下就不繼續通知了，本來打算使用將失敗的消息寫到數據庫等待發送，然后每秒查詢數據庫獲取消息通知前端。但覺得這樣的處理方式太粗暴。

存在以下缺點：

1 、每秒請求有點兒浪費資源；

2 、通知方式不穩定；

3 、無法承受大數據量等等

所以最終打算使用rabbitmq的消息延遲+死信隊列來實現。消息模型如下：

producer發布消息，通過exchangeA的消息會被分發到QueueA,Consumer監聽queueA，一旦有消息到來就被消費，這邊的消費業務就是通知前端，如果通知失敗，就創建一個延遲隊列declareQueue，設置每個消息的ttl然后通過declare_exchange將消息分發到declare_queue,因為declare_queue沒有consumer并且declare_queue中的消息設置了ttl，當ttl到期后，將通過DEX路由到queueA,被重新消費。代碼如下：DeclareQueue.java

package org.delayQueue;
	
import com.rabbitmq.client.BuiltinExchangeType;
import com.rabbitmq.client.Channel;
import com.rabbitmq.client.Connection;
import com.rabbitmq.client.ConnectionFactory;
 
public class DeclareQueue {
	public static String EXCHANGE_NAME = "notifyExchange";
	public static void init() {
		ConnectionFactory factory = new ConnectionFactory();
		factory.setHost("localhost");
		factory.setPort(5672);
		Connection connection = null;
		try {
			connection = factory.newConnection();
			Channel channel = connection.createChannel();
			channel.exchangeDeclare(EXCHANGE_NAME, BuiltinExchangeType.TOPIC);
			String routingKey = "AliPaynotify";
			String message = "http://localhost:8080/BossCenter/payGateway/notifyRecv.jsp?is_success=T?ify_id=4ab9bed148d043d0bf75460706f7774a?ify_time=2014-08-29+16%3A22%3A02?ify_type=trade_status_sync&out_trade_no=1421712120109862&total_fee=424.42&trade_no=14217121201098611&trade_status=TRADE_SUCCESS";
			channel.basicPublish(EXCHANGE_NAME, routingKey, null, message.getBytes());
			System.out.println(" [x] Sent :" + message);
		} catch (Exception e) {
			// TODO Auto-generated catch block
			e.printStackTrace();
		} finally {
			if (connection != null) {
				try {
					connection.close();
				} catch (Exception ignore) {
				}
			}
		}
	}
	public static void main(String args[]) {
		init();
}

DeclareConsumer.java

package org.delayQueue;
 
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.Map.Entry;
import org.apache.http.HttpResponse;
import org.apache.http.client.ClientProtocolException;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.impl.client.DefaultHttpClient;
import com.rabbitmq.client.AMQP;
import com.rabbitmq.client.Channel;
import com.rabbitmq.client.Connection;
import com.rabbitmq.client.ConnectionFactory;
import com.rabbitmq.client.Consumer;
import com.rabbitmq.client.DefaultConsumer;
import com.rabbitmq.client.Envelope;
public class DeclareConsumer {
	public static String EXCHANGE_NAME = "notifyExchange";
	public static String QU_declare_15S = "Qu_declare_15s";
	public static String EX_declare_15S = "EX_declare_15s";
	public static String ROUTINGKEY = "AliPaynotify";
	public static Connection connection = null;
	public static Channel channel = null;
	public static Channel DECLARE_15S_CHANNEL = null;
	public static String declare_queue = "init";
	public static String originalExpiration = "0";
	public static void init() throws Exception {
		ConnectionFactory factory = new ConnectionFactory();
		factory.setHost("localhost");
		factory.setPort(5672);
		connection = factory.newConnection();
		channel = connection.createChannel();
		DECLARE_15S_CHANNEL = connection.createChannel();
	}
	public static void consume() {
		try {
			channel.exchangeDeclare(EXCHANGE_NAME, "topic");
			final String queueName = channel.queueDeclare().getQueue();
			channel.queueBind(queueName, EXCHANGE_NAME, ROUTINGKEY);
			System.out.println(" [*] Waiting for messages. To exit press CTRL+C");
			final Consumer consumer = new DefaultConsumer(channel) {
				@Override
				public void handleDelivery(String consumerTag, Envelope envelope, AMQP.BasicProperties properties, byte[] body) throws IOException {
					String message = new String(body, "UTF-8");
					Map<String, Object> headers = properties.getHeaders();
					if (headers != null) {
						List<Map<String, Object>> xDeath = (List<Map<String, Object>>) headers.get("x-death");
						System.out.println("xDeath--- > " + xDeath);
						if (xDeath != null && !xDeath.isEmpty()) {
							Map<String, Object> entrys = xDeath.get(0);
							// for(Entry<String, Object>
							// entry:entrys.entrySet()){
							// System.out.println(entry.getKey()+":"+entry.getValue());
							// }
							originalExpiration = entrys.get("original-expiration").toString();
						}
					}
					System.out.println(" [x] Received '" + envelope.getRoutingKey() + "':'" + message + "'" + "time" + System.currentTimeMillis());
					HttpClient httpClient = new DefaultHttpClient();
					HttpPost post = new HttpPost(message);
					HttpResponse response = httpClient.execute(post);
					BufferedReader inreader = null;
					if (response.getStatusLine().getStatusCode() == 200) {
						inreader = new BufferedReader(new InputStreamReader(response.getEntity().getContent(), "UTF-8"));
						StringBuffer responseBody = new StringBuffer();
						String line = null;
						while ((line = inreader.readLine()) != null) {
							responseBody.append(line);
						if (!responseBody.equals("success")) {
							// putDeclre15s(message);
							if (originalExpiration.equals("0")) {
								putDeclreQueue(message, 3000, QU_declare_15S);
							}
							if (originalExpiration.equals("3000")) {
								putDeclreQueue(message, 30000, QU_declare_15S);
							if (originalExpiration.equals("30000")) {
								putDeclreQueue(message, 60000, QU_declare_15S);
							if (originalExpiration.equals("60000")) {
								putDeclreQueue(message, 120000, QU_declare_15S);
							if (originalExpiration.equals("120000")) {
								putDeclreQueue(message, 180000, QU_declare_15S);
							if (originalExpiration.equals("180000")) {
								putDeclreQueue(message, 300000, QU_declare_15S);
							if (originalExpiration.equals("300000")) {
//								channel.basicConsume(QU_declare_300S,true, this);
								System.out.println("finish notify");
					} else {
						System.out.println(response.getStatusLine().getStatusCode());
				}
			};
			channel.basicConsume(queueName, true, consumer);
		} catch (Exception e) {
			e.printStackTrace();
		} finally {
		}
	static Map<String, Object> xdeathMap = new HashMap<String, Object>();
	static List<Map<String, Object>> xDeath = new ArrayList<Map<String, Object>>();
	static Map<String, Object> xdeathParam = new HashMap<String, Object>();
	public static void putDeclre15s(String message) throws IOException {
		channel.exchangeDeclare(EX_declare_15S, "topic");
		Map<String, Object> args = new HashMap<String, Object>();
		args.put("x-dead-letter-exchange", EXCHANGE_NAME);// 死信exchange
		AMQP.BasicProperties.Builder builder = new AMQP.BasicProperties.Builder();
		builder.expiration("3000").deliveryMode(2);// 設置消息TTL
		AMQP.BasicProperties properties = builder.build();
		channel.queueDeclare(QU_declare_15S, false, false, false, args);
		channel.queueBind(QU_declare_15S, EX_declare_15S, ROUTINGKEY);
		channel.basicPublish(EX_declare_15S, ROUTINGKEY, properties, message.getBytes());
		System.out.println("send message in QA_DEFERRED_15S" + message + "time" + System.currentTimeMillis());
	public static void putDeclreQueue(String message, int mis, String queue) throws IOException {
		builder.expiration(String.valueOf(mis)).deliveryMode(2);// 設置消息TTL
		channel.queueDeclare(queue, false, false, false, args);
		channel.queueBind(queue, EX_declare_15S, ROUTINGKEY);
		System.out.println("send message in " + queue + message + "time============" + System.currentTimeMillis());
	public static void main(String args[]) throws Exception {
		init();
		consume();
}

消息通過dlx轉發的情況下，header頭部會帶有x-death的一個數組，里面包含消息的各項屬性，比如說消息成為死信的原因reason，original-expiration這個字段表示消息在原來隊列中的過期時間，根據這個值來確定下一次通知的延遲時間應該是多少秒。運行結果如下：

到此這篇關于RabbitMQ 延遲隊列實現訂單支付結果異步階梯性通知的文章就介紹到這了,更多相關RabbitMQ 延遲隊列實現訂單支付內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: