利用MySQL?Shell安裝部署MGR集群的詳細過程

更新時間：2022年02月16日 14:48:07 作者：GreatSQL

MySQL?Shell是一個客戶端工具，可用于方便管理和操作MySQL，支持SQL、JavaScript、Python等多種語言，也包括完善的API，本文介紹如何利用MySQL?Shell?+?GreatSQL?8.0.25構建一個三節點的MGR集群，感興趣的朋友一起看看吧

MySQL Shell是一個客戶端工具，可用于方便管理和操作MySQL，支持SQL、JavaScript、Python等多種語言，也包括完善的API。MySQL Shell支持文檔型和關系型數據庫模式，通過X DevAPI可以管理文檔型數據，通過AdminAPI可以管理InnoDB Cluster、InnoDB ClusterSet及InnoDB ReplicaSet等。

1. 安裝準備

準備好下面三臺服務器：

IP	端口	角色
172.16.16.10	3306	mgr1
172.16.16.11	3306	mgr2
172.16.16.12	3306	mgr3

確保三個節點間的網絡是可以互通的，并且沒有針對3306和33061端口的防火墻攔截規則。

利用yum安裝MySQL Shell，版本選擇和GreatSQL相同的8.0.25：

$ yum install mysql-shell-8.0.25

假定已經參考前文 3. 安裝部署MGR集群做好MySQL Server的初始化并啟動三個實例。

接下來直接利用MySQL Shell部署MGR。

2. 利用MySQL Shell構建MGR集群

利用MySQL Shell構建MGR集群比較簡單，主要有幾個步驟：

檢查實例是否滿足條件。
創建并初始化一個集群。
逐個添加實例。

首先，用管理員賬號 root 連接到第一個節點：

#在本地通過socket方式登入
$ mysqlsh -Spath/mysql.sock root@localhost
Please provide the password for 'root@.%2Fmysql.sock': ********
Save password for 'root@.%2Fmysql.sock'? [Y]es/[N]o/Ne[v]er (default No): yes
MySQL Shell 8.0.25
...

執行命令 \status 查看當前節點的狀態，確認連接正?？捎?。

執行 dba.configureInstance() 命令開始檢查當前實例是否滿足安裝MGR集群的條件，如果不滿足可以直接配置成為MGR集群的一個節點：

MySQL localhost JS > dba.configureInstance()
Configuring local MySQL instance listening at port 3306 for use in an InnoDB cluster...

This instance reports its own address as 172.16.16.10:3306
#提示當前的用戶是管理員，不能直接用于MGR集群，需要新建一個賬號
ERROR: User 'root' can only connect from 'localhost'. New account(s) with proper source address specification to allow remote connection from all instances must be created to manage the cluster.
1) Create remotely usable account for 'root' with same grants and password
2) Create a new admin account for InnoDB cluster with minimal required grants
3) Ignore and continue
4) Cancel
Please select an option [1]: 2 <-- 這里我們選擇方案2，即創建一個最小權限賬號
Please provide an account name (e.g: icroot@%) to have it created with the necessary
privileges or leave empty and press Enter to cancel.
Account Name: GreatSQL
Password for new account: ********
Confirm password: ********
applierWorkerThreads will be set to the default value of 4.
The instance '172.16.16.10:3306' is valid to be used in an InnoDB cluster.
Cluster admin user 'GreatSQL'@'%' created.
The instance '172.16.16.10:3306' is already ready to be used in an InnoDB cluster.
Successfully enabled parallel appliers.

完成檢查并創建完新用戶后，退出當前的管理員賬戶，并用新創建的MGR專用賬戶登入，準備初始化創建一個新集群：

$ mysqlsh --uri GreatSQL@172.16.16.10:3306
Please provide the password for 'GreatSQL@172.16.16.10:3306': ********
Save password for 'GreatSQL@172.16.16.10:3306'? [Y]es/[N]o/Ne[v]er (default No): yes
MySQL Shell 8.0.25

...
#定義一個變量名c，方便下面引用
 MySQL  172.16.16.10:3306 ssl  JS > var c = dba.createCluster('MGR1');
A new InnoDB cluster will be created on instance '172.16.16.10:3306'.
Validating instance configuration at 172.16.16.10:3306...
This instance reports its own address as 172.16.16.10:3306
Instance configuration is suitable.
NOTE: Group Replication will communicate with other members using '172.16.16.10:33061'. Use the localAddress option to override.
Creating InnoDB cluster 'MGR1' on '172.16.16.10:3306'...
Adding Seed Instance...
Cluster successfully created. Use Cluster.addInstance() to add MySQL instances.
At least 3 instances are needed for the cluster to be able to withstand up to
one server failure.
 MySQL  172.16.16.10:3306 ssl  JS >

這就完成了MGR集群的初始化并加入第一個節點（引導節點）。

接下來，用同樣方法先用 root 賬號分別登入到另外兩個節點，完成節點的檢查并創建最小權限級別用戶（此過程略過。。。注意各節點上創建的用戶名、密碼都要一致），之后回到第一個節點，執行 addInstance() 添加另外兩個節點。

MySQL 172.16.16.10:3306 ssl JS > c.addInstance('GreatSQL@172.16.16.11:3306'); <-- 這里要指定MGR專用賬號

WARNING: A GTID set check of the MySQL instance at '172.16.16.11:3306' determined that it contains transactions that do not originate from the cluster, which must be discarded before it can join the cluster.
172.16.16.11:3306 has the following errant GTIDs that do not exist in the cluster:
b05c0838-6850-11ec-a06b-00155d064000:1
WARNING: Discarding these extra GTID events can either be done manually or by completely overwriting the state of 172.16.16.11:3306 with a physical snapshot from an existing cluster member. To use this method by default, set the 'recoveryMethod' option to 'clone'.
Having extra GTID events is not expected, and it is recommended to investigate this further and ensure that the data can be removed prior to choosing the clone recovery method.
Please select a recovery method [C]lone/[A]bort (default Abort): Clone <-- 選擇用Clone方式從第一個節點全量復制數據
Validating instance configuration at 172.16.16.11:3306...
This instance reports its own address as 172.16.16.11:3306
Instance configuration is suitable.
NOTE: Group Replication will communicate with other members using '172.16.16.11:33061'. Use the localAddress option to override.
A new instance will be added to the InnoDB cluster. Depending on the amount of
data on the cluster this might take from a few seconds to several hours.
Adding instance to the cluster...
Monitoring recovery process of the new cluster member. Press ^C to stop monitoring and let it continue in background.
Clone based state recovery is now in progress.
NOTE: A server restart is expected to happen as part of the clone process. If the
server does not support the RESTART command or does not come back after a
while, you may need to manually start it back.
* Waiting for clone to finish...
NOTE: 172.16.16.11:3306 is being cloned from 172.16.16.10:3306
** Stage DROP DATA: Completed
** Clone Transfer
FILE COPY ############################################################ 100% Completed
PAGE COPY ############################################################ 100% Completed
REDO COPY ############################################################ 100% Completed
NOTE: 172.16.16.11:3306 is shutting down... <-- 數據Clone完成，準備重啟實例。如果該實例無法完成自動重啟，則需要手動啟動
* Waiting for server restart... ready
* 172.16.16.11:3306 has restarted, waiting for clone to finish...
** Stage RESTART: Completed
* Clone process has finished: 72.43 MB transferred in about 1 second (~72.43 MB/s)
State recovery already finished for '172.16.16.11:3306'
The instance '172.16.16.11:3306' was successfully added to the cluster. <-- 新實例加入成功
MySQL 172.16.16.10:3306 ssl JS >

用同樣的方法，將 172.16.16.12:3306 實例也加入到集群中。

現在，一個有這三節點的MGR集群已經部署完畢，來確認下：

 MySQL  172.16.16.10:3306 ssl  JS > c.describe()
{
    "clusterName": "MGR1",
    "defaultReplicaSet": {
        "name": "default",
        "topology": [
            {
                "address": "172.16.16.10:3306",
                "label": "172.16.16.10:3306",
                "role": "HA"
            },
                "address": "172.16.16.11:3306",
                "label": "172.16.16.11:3306",
                "address": "172.16.16.12:3306",
                "label": "172.16.16.12:3306",
            }
        ],
        "topologyMode": "Single-Primary"
    }
}

或者執行 c.status() 可以打印出集群更多的信息。

至此，利用MySQL Shell構建一個三節點的MGR集群做好了，可以嘗試向 Primary 節點寫入數據觀察測試。

3. MySQL Shell接管現存的MGR集群

對于已經在運行中的MGR集群，也是可以用MySQL Shell接管的。只需要在調用 createCluster() 函數時，加上 adoptFromGR:true 選項即可。實際上不加這個選項的話，MySQL Shell也會自動檢測到該MGR集群已存在，并詢問是否要接管。

在這里簡單演示下：

#不加上 adoptFromGr:true 選項
MySQL 172.16.16.10:3306 ssl JS > var c=dba.createCluster('MGR1');
A new InnoDB cluster will be created on instance '172.16.16.10:3306'.

You are connected to an instance that belongs to an unmanaged replication group.
Do you want to setup an InnoDB cluster based on this replication group? [Y/n]:

可以看到，會有提示信息詢問是否要接管。

如果加上 adoptFromGr:true 選項，則會直接創建集群，不再詢問：

var c=dba.createCluster('MGR1', {adoptFromGr:true});
A new InnoDB cluster will be created based on the existing replication group on instance '172.16.16.10:3306'.

Creating InnoDB cluster 'MGR1' on '172.16.16.10:3306'...
Adding Seed Instance...
Adding Instance '172.16.16.10:3306'...
Adding Instance '172.16.16.11:3306'...
Adding Instance '172.16.16.12:3306'...
...

如果是MGR集群的metadata發生變化，這時候無論調用 dba.getCluster() 還是 dba.createCluster 都可能會報告類似下面的錯誤：

Dba.getCluster: Unable to get an InnoDB cluster handle. The instance '192.168.6.27:3306' may belong to a different cluster from the one registered in the Metadata since the value of 'group_replication_group_name' does not match the one registered in the Metadata: possible split-brain scenario. Please retry while connected to another member of the cluster. (RuntimeError)

這種情況下，可以調用 dba.dropMetadataSchema() 函數刪除元數據，再調用 dba.createCluster() 接管集群：

#確保不影響正常業務的話，刪除無用MGR元數據
 MySQL  172.16.16.10:3306 ssl  JS > dba.dropMetadataSchema()
Are you sure you want to remove the Metadata? [y/N]: y
Metadata Schema successfully removed.

#接管現有集群
 MySQL  172.16.16.10:3306 ssl  JS > var c=dba.createCluster('MGR1', {adoptFromGr:true})
...

這樣就可以了接管了。