草稿整理后mysql兩個數據庫結構對比
更新時間：2022年02月07日 10:36:41 作者：xiaostudy
這篇文章主要為大家詳細介紹了mysql兩個數據庫結構對比結果，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助
1、草稿：
-- 1.將mysql分隔符從;設置為&
DELIMITER &
-- 2.如果存在存儲過程getdatabaseCount則刪除
DROP PROCEDURE IF EXISTS `getdatabaseCount` &
-- 3.定義存儲過程，獲取特定數據庫的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getdatabaseCount(IN database_name CHAR(20), OUT count_date INT)
BEGIN
-- 4.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 5.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\';');
SET @sqlcounts := $sqltext;
-- 6.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 7.執行SQL語句
EXECUTE stmt;
-- 8.釋放資源
DEALLOCATE PREPARE stmt;
-- 9.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 10.定義存儲過程結束
&
-- 2.如果存在存儲過程getCount則刪除
DROP PROCEDURE IF EXISTS `getTableCount` &
-- 3.定義存儲過程，獲取特定數據庫表的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getTableCount(IN database_name CHAR(20), IN table_name CHAR(200), OUT count_date INT)
BEGIN
-- 4.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 5.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\';');
SET @sqlcounts := $sqltext;
-- 6.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 7.執行SQL語句
EXECUTE stmt;
-- 8.釋放資源
DEALLOCATE PREPARE stmt;
-- 9.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 10.定義存儲過程結束
&
-- 2.如果存在存儲過程getColumnCount則刪除
DROP PROCEDURE IF EXISTS `getColumnCount` &
-- 3.定義存儲過程，獲取特定數據庫表列的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳入?yún)?shù)column_name字符串類型，為列名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnCount(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), OUT count_date INT)
BEGIN
-- 4.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 5.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
-- 6.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 7.執行SQL語句
EXECUTE stmt;
-- 8.釋放資源
DEALLOCATE PREPARE stmt;
-- 9.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 10.定義存儲過程結束
&
-- 2.如果存在存儲過程getColumnInfo則刪除
DROP PROCEDURE IF EXISTS `getColumnInfo` &
-- 3.定義存儲過程，獲取特定數據庫表列的信息
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳入?yún)?shù)column_name字符串類型，為列名；傳入?yún)?shù)column_info字符串類型，列信息；傳出參數result_data字符串類型，信息)
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnInfo(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), IN column_info CHAR(50), OUT result_data CHAR(20))
BEGIN
-- 4.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 5.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT t.', column_info,' into @column_info FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
-- 6.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 7.執行SQL語句
EXECUTE stmt;
-- 8.釋放資源
DEALLOCATE PREPARE stmt;
-- 9.獲取動態SQL語句返回值
SET result_data = @column_info;
END
-- 10.定義存儲過程結束
&
-- 11.如果存在存儲過程comparison則刪除
DROP PROCEDURE IF EXISTS `comparison` &
-- 12.定義存儲過程，獲取指定數據庫關鍵詞的表列名
-- (傳入?yún)?shù)database_n字符串類型，數據庫名；傳入?yún)?shù)collation_n字符串類型，具體編碼類型；傳入?yún)?shù)key_name字符串類型，為關鍵字；傳出參數tableColumnNames字符串類型，表列名)
CREATE DEFINER=`root`@`localhost` PROCEDURE comparison(IN database_1 CHAR(20), IN database_2 CHAR(20), IN column_info CHAR(50), OUT info TEXT)
BEGIN
-- 13.聲明變量。database_name查詢出來的數據庫，table_name查詢出來的表名，column_name查詢出來的列名，collation_name查詢出來的具體編碼類型
DECLARE database_name, table_name, column_name, collation_name, result_data_1, result_data_2 CHAR(200);
DECLARE this_info, database_table_no TEXT DEFAULT '';
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
-- 14.定義游標結束標識，默認為0
DECLARE stopflag INT DEFAULT 0;
-- 15.定義游標，其實就是臨時存儲sql返回的集合
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME, t.COLUMN_NAME, t.COLLATION_NAME FROM information_schema.COLUMNS t;
-- 16.游標結束就設置為1
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
-- 17.打開游標
OPEN sql_resoult;
-- 18.讀取游標中數據，存儲到指定變量
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
-- 19.沒有結束繼續往下走
WHILE (stopflag=0) DO
BEGIN
-- 20.判斷數據庫是否為輸入的數據庫名稱，和，指定具體編碼類型，和，不含.
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
-- 21.調用存儲過程，獲取特定表列關鍵詞的數量
CALL getTableCount(database_2, table_name, resoult_count);
-- 22.如果數量不等于0，那么記錄表列名
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_2, table_name, column_name, resoult_count);
-- 23.拼接字符串，不可直接用傳出變量設值
IF (resoult_count <> 0) THEN
CALL getColumnInfo(database_1, table_name, column_name, column_info, result_data_1);
CALL getColumnInfo(database_2, table_name, column_name, column_info, result_data_2);
-- 23.拼接字符串，不可直接用傳出變量設值
IF (result_data_1 <> result_data_2) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
ELSE
SET this_info=CONCAT(this_info, table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
END IF;
END IF;
ELSE
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_1, table_name, column_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
-- 24.讀取游標中數據，存儲到指定變量。（和18一樣）
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
END;
END WHILE;
-- 25.關閉游標
CLOSE sql_resoult;
ELSE
IF (database_count_1 = 0 AND database_count_2 = 0) THEN
SET this_info = CONCAT(database_1, '和', database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
IF (database_count_1 = 0) THEN
SET this_info = CONCAT(database_1, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
SET this_info = CONCAT(database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
END IF;
END IF;
END IF;
-- 26.把數據放到傳出參數
SET info=this_info;
END
-- 27.定義存儲過程結束
&
-- 28.將mysql分隔符從&設置為;
DELIMITER ;
-- 29.設置變量
SET @database_1='my_test';
SET @database_2='my_test2';
SET @column_info='data_type';
SET @count='';
-- 30.調用存儲過程
CALL comparison(@database_1, @database_2, @column_info, @count);
-- 31.打印
SELECT @count;
-- 32.如果存在存儲過程則刪除
DROP PROCEDURE IF EXISTS `comparison`;
2、整理：
-- 1.將mysql分隔符從;設置為&
DELIMITER &
-- 2.如果存在存儲過程getdatabaseCount則刪除
DROP PROCEDURE IF EXISTS `getdatabaseCount` &
-- 3.定義存儲過程，獲取特定數據庫的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getdatabaseCount(IN database_name CHAR(20), OUT count_date INT)
BEGIN
-- 4.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 5.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\';');
SET @sqlcounts := $sqltext;
-- 6.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 7.執行SQL語句
EXECUTE stmt;
-- 8.釋放資源
DEALLOCATE PREPARE stmt;
-- 9.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 10.定義存儲過程結束
&
-- 11.如果存在存儲過程getTableCount則刪除
DROP PROCEDURE IF EXISTS `getTableCount` &
-- 12.定義存儲過程，獲取特定數據庫表的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getTableCount(IN database_name CHAR(20), IN table_name CHAR(200), OUT count_date INT)
BEGIN
-- 13.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 14.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\';');
SET @sqlcounts := $sqltext;
-- 15.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 16.執行SQL語句
EXECUTE stmt;
-- 17.釋放資源
DEALLOCATE PREPARE stmt;
-- 18.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 19.定義存儲過程結束
&
-- 20.如果存在存儲過程getColumnCount則刪除
DROP PROCEDURE IF EXISTS `getColumnCount` &
-- 21.定義存儲過程，獲取特定數據庫表列的數量
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳入?yún)?shù)column_name字符串類型，為列名；傳出參數count_date整數類型，為數量)
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnCount(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), OUT count_date INT)
BEGIN
-- 22.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 23.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
-- 24.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 25.執行SQL語句
EXECUTE stmt;
-- 26.釋放資源
DEALLOCATE PREPARE stmt;
-- 27.獲取動態SQL語句返回值
SET count_date = @count_date;
END
-- 28.定義存儲過程結束
&
-- 29.如果存在存儲過程getColumnInfo則刪除
DROP PROCEDURE IF EXISTS `getColumnInfo` &
-- 30.定義存儲過程，獲取特定數據庫表列的信息
-- (傳入?yún)?shù)database_name字符串類型，為數據庫名；傳入?yún)?shù)table_name字符串類型，為表名；傳入?yún)?shù)column_name字符串類型，為列名；傳入?yún)?shù)column_info字符串類型，列信息；傳出參數result_data字符串類型，信息)
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnInfo(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), IN column_info CHAR(50), OUT result_data CHAR(20))
BEGIN
-- 31.聲明變量
DECLARE $sqltext VARCHAR(1000);
-- 32.動態sql，把sql返回值放到@count_date中
SET $sqltext = CONCAT('SELECT t.', column_info,' into @column_info FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
-- 33.預編釋?zhuān)瑂tmt預編釋變量的名稱
PREPARE stmt FROM @sqlcounts;
-- 34.執行SQL語句
EXECUTE stmt;
-- 35.釋放資源
DEALLOCATE PREPARE stmt;
-- 36.獲取動態SQL語句返回值
SET result_data = @column_info;
END
-- 37.定義存儲過程結束
&
-- 38.如果存在存儲過程comparisonTableExist則刪除
DROP PROCEDURE IF EXISTS `comparisonTableExist` &
-- 39.定義存儲過程，對比表是否存在
-- (傳入?yún)?shù)database_1字符串類型，數據庫名1；傳入?yún)?shù)database_2字符串類型，數據庫名2；傳入?yún)?shù)info字符串類型，庫表信息)
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonTableExist(IN database_1 CHAR(20), IN database_2 CHAR(20), OUT info MEDIUMTEXT)
BEGIN
-- 40.聲明變量。database_name查詢出來的數據庫，table_name查詢出來的表名
DECLARE database_name, table_name CHAR(200);
-- this_info表不存在的記錄，database_table_no表不存在的記錄跳過重復查詢
DECLARE this_info, database_table_no MEDIUMTEXT DEFAULT '';
-- database_count_1統計數據庫1存在的數量，database_count_2統計數據庫2存在的數量，resoult_count統計表存在的數量。如果為0表示不存在
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
-- 41.定義游標結束標識，默認為0
DECLARE stopflag INT DEFAULT 0;
-- 42.定義游標，其實就是臨時存儲sql返回的集合
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME FROM information_schema.COLUMNS t;
-- 43.游標結束就設置為1
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
-- 44.調用存儲過程getdatabaseCount，查看兩個數據庫是否存在，都存在則繼續
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
-- 45.打開游標
OPEN sql_resoult;
-- 46.讀取游標中數據，存儲到指定變量
FETCH sql_resoult INTO database_name, table_name;
-- 47.沒有結束繼續往下走
WHILE (stopflag=0) DO
BEGIN
-- 48.判斷數據庫是否為輸入的數據庫名稱1，去除已經比較過數據庫2的表不存在
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
-- 49.調用存儲過程getTableCount，查看表是否存在
CALL getTableCount(database_2, table_name, resoult_count);
-- 50.如果數量等于0，那么表不存在
IF (resoult_count = 0) THEN
-- 51.把不存在的表記錄下來
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
-- 52.判斷數據庫是否為輸入的數據庫名稱2，去除已經比較過數據庫1的表不存在
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
-- 53.讀取游標中數據，存儲到指定變量。（和46一樣）
FETCH sql_resoult INTO database_name, table_name;
END;
END WHILE;
-- 54.關閉游標
CLOSE sql_resoult;
ELSE
IF (database_count_1 = 0 AND database_count_2 = 0) THEN
SET this_info = CONCAT(database_1, '和', database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
IF (database_count_1 = 0) THEN
SET this_info = CONCAT(database_1, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
SET this_info = CONCAT(database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
END IF;
END IF;
END IF;
-- 55.把數據放到傳出參數
SET info=this_info;
END
-- 56.定義存儲過程結束
&
-- 57.如果存在存儲過程comparisonColumnExist則刪除
DROP PROCEDURE IF EXISTS `comparisonColumnExist` &
-- 58.定義存儲過程，對比列是否存在
-- (傳入?yún)?shù)database_1字符串類型，數據庫名1；傳入?yún)?shù)database_2字符串類型，數據庫名2；傳入?yún)?shù)info字符串類型，庫表信息)
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonColumnExist(IN database_1 CHAR(20), IN database_2 CHAR(20), OUT info MEDIUMTEXT)
BEGIN
-- 59.聲明變量。database_name查詢出來的數據庫，table_name查詢出來的表名，column_name查詢出來的列名
DECLARE database_name, table_name, column_name CHAR(200);
-- this_info表不存在的記錄，database_table_no表不存在的記錄跳過重復查詢
DECLARE this_info, database_table_no TEXT DEFAULT '';
-- database_count_1統計數據庫1存在的數量，database_count_2統計數據庫2存在的數量，resoult_count統計表存在的數量。如果為0表示不存在
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
-- 60.定義游標結束標識，默認為0
DECLARE stopflag INT DEFAULT 0;
-- 61.定義游標，其實就是臨時存儲sql返回的集合
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME, t.COLUMN_NAME FROM information_schema.COLUMNS t;
-- 62.游標結束就設置為1
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
-- 63.調用存儲過程getdatabaseCount，查看兩個數據庫是否存在，都存在則繼續（同44）
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
-- 64.打開游標
OPEN sql_resoult;
-- 65.讀取游標中數據，存儲到指定變量
FETCH sql_resoult INTO database_name, table_name, column_name;
-- 66.沒有結束繼續往下走
WHILE (stopflag=0) DO
BEGIN
-- 67.判斷數據庫是否為輸入的數據庫名稱1，去除已經比較過數據庫2的表不存在（同48）
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
-- 68.調用存儲過程getTableCount，查看表是否存在（同49）
CALL getTableCount(database_2, table_name, resoult_count);
-- 69.如果數量不等于0，則繼續
IF (resoult_count <> 0) THEN
-- 70.調用存儲過程getColumnCount，查看列是否存在。為0說明不存在
CALL getColumnCount(database_2, table_name, column_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
-- 71.判斷數據庫是否為輸入的數據庫名稱2，去除已經比較過數據庫1的表不存在（同52）
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_1, table_name, column_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
-- 72.讀取游標中數據，存儲到指定變量。（和65一樣）
FETCH sql_resoult INTO database_name, table_name, column_name;
END;
END WHILE;
-- 73.關閉游標
CLOSE sql_resoult;
END IF;
-- 74.把數據放到傳出參數
SET info=this_info;
END
-- 75.定義存儲過程結束
&
-- 76.如果存在存儲過程comparisonColumnInfo則刪除
DROP PROCEDURE IF EXISTS `comparisonColumnInfo` &
-- 77.定義存儲過程，對比列的不同
-- (傳入?yún)?shù)database_1字符串類型，數據庫名1；傳入?yún)?shù)database_2字符串類型，數據庫名2；傳入?yún)?shù)info字符串類型，庫表信息)
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonColumnInfo(IN database_1 CHAR(20), IN database_2 CHAR(20),OUT info MEDIUMTEXT)
BEGIN
-- 78.聲明變量。database_name查詢出來的數據庫，table_name查詢出來的表名，column_name查詢出來的列名，collation_name查詢出來的具體編碼類型
-- result_data_1數據庫1的列信息，result_data_2數據庫2的列信息，column_info對比的列（現在只比較DATA_TYPE、CHARACTER_SET_NAME）
DECLARE database_name, table_name, column_name, collation_name, result_data_1, result_data_2, column_info CHAR(200);
-- this_info表不存在的記錄，database_table_no表不存在的記錄跳過重復查詢
DECLARE this_info, database_table_no MEDIUMTEXT DEFAULT '';
-- database_count_1統計數據庫1存在的數量，database_count_2統計數據庫2存在的數量，resoult_count統計表存在的數量。如果為0表示不存在
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
-- 79.定義游標結束標識，默認為0
DECLARE stopflag INT DEFAULT 0;
-- 80.定義游標，其實就是臨時存儲sql返回的集合
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME, t.COLUMN_NAME, t.COLLATION_NAME FROM information_schema.COLUMNS t;
-- 81.游標結束就設置為1
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
-- 82.調用存儲過程getdatabaseCount，查看兩個數據庫是否存在，都存在則繼續（同63）
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
-- 83.打開游標
OPEN sql_resoult;
-- 84.讀取游標中數據，存儲到指定變量
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
-- 85.沒有結束繼續往下走
WHILE (stopflag=0) DO
BEGIN
-- 86.判斷數據庫是否為輸入的數據庫名稱1，去除已經比較過數據庫2的表不存在（同67）
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
-- 87.調用存儲過程getTableCount，查看表是否存在（同68）
CALL getTableCount(database_2, table_name, resoult_count);
-- 88.如果數量不等于0，則繼續
IF (resoult_count <> 0) THEN
-- 89.調用存儲過程getColumnCount，查看列是否存在。為0說明不存在（同70）
CALL getColumnCount(database_2, table_name, column_name, resoult_count);
IF (resoult_count <> 0) THEN
-- 90.對比DATA_TYPE是否相同
SET column_info = 'DATA_TYPE';
CALL getColumnInfo(database_1, table_name, column_name, column_info, result_data_1);
CALL getColumnInfo(database_2, table_name, column_name, column_info, result_data_2);
IF (result_data_1 <> result_data_2) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
ELSE
SET this_info=CONCAT(this_info, table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
END IF;
END IF;
-- 91.對比CHARACTER_SET_NAME是否相同
SET column_info = 'CHARACTER_SET_NAME';
CALL getColumnInfo(database_1, table_name, column_name, column_info, result_data_1);
CALL getColumnInfo(database_2, table_name, column_name, column_info, result_data_2);
IF (result_data_1 <> result_data_2) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
ELSE
SET this_info=CONCAT(this_info, table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
END IF;
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count = 0) THEN
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
-- 92.讀取游標中數據，存儲到指定變量。（和84一樣）
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
END;
END WHILE;
-- 93.關閉游標
CLOSE sql_resoult;
END IF;
-- 94.把數據放到傳出參數
SET info=this_info;
END
-- 95.定義存儲過程結束
&
-- 96.將mysql分隔符從&設置為;
DELIMITER ;
-- 97.設置變量
SET @database_1='my_test1';
SET @database_2='my_test2';
SET @tableExistInfo='';
SET @columnExistInfo='';
SET @columnInfo='';
-- 98.調用存儲過程
CALL comparisonTableExist(@database_1, @database_2, @tableExistInfo);
CALL comparisonColumnExist(@database_1, @database_2, @columnExistInfo);
CALL comparisonColumnInfo(@database_1, @database_2, @columnInfo);
SET @info=CONCAT(@tableExistInfo, '\n', @columnExistInfo, '\n', @columnInfo);
-- 99.打印
SELECT @info;
-- 100.如果存在存儲過程則刪除
DROP PROCEDURE IF EXISTS `comparisonColumnInfo`;
DROP PROCEDURE IF EXISTS `comparisonColumnExist`;
DROP PROCEDURE IF EXISTS `comparisonTableExist`;
DROP PROCEDURE IF EXISTS `getColumnInfo`;
DROP PROCEDURE IF EXISTS `getColumnCount`;
DROP PROCEDURE IF EXISTS `getTableCount`;
DROP PROCEDURE IF EXISTS `getdatabaseCount`;3、無注釋
DELIMITER &
DROP PROCEDURE IF EXISTS `getdatabaseCount` &
CREATE DEFINER=`root`@`localhost` PROCEDURE getdatabaseCount(IN database_name CHAR(20), OUT count_date INT)
BEGIN
DECLARE $sqltext VARCHAR(1000);
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\';');
SET @sqlcounts := $sqltext;
PREPARE stmt FROM @sqlcounts;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
SET count_date = @count_date;
END
&
DROP PROCEDURE IF EXISTS `getTableCount` &
CREATE DEFINER=`root`@`localhost` PROCEDURE getTableCount(IN database_name CHAR(20), IN table_name CHAR(200), OUT count_date INT)
BEGIN
DECLARE $sqltext VARCHAR(1000);
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\';');
SET @sqlcounts := $sqltext;
PREPARE stmt FROM @sqlcounts;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
SET count_date = @count_date;
END
&
DROP PROCEDURE IF EXISTS `getColumnCount` &
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnCount(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), OUT count_date INT)
BEGIN
DECLARE $sqltext VARCHAR(1000);
SET $sqltext = CONCAT('SELECT COUNT(*) into @count_date FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
PREPARE stmt FROM @sqlcounts;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
SET count_date = @count_date;
END
&
DROP PROCEDURE IF EXISTS `getColumnInfo` &
CREATE DEFINER=`root`@`localhost` PROCEDURE getColumnInfo(IN database_name CHAR(20), IN table_name CHAR(200), IN column_name CHAR(200), IN column_info CHAR(50), OUT result_data CHAR(20))
BEGIN
DECLARE $sqltext VARCHAR(1000);
SET $sqltext = CONCAT('SELECT t.', column_info,' into @column_info FROM information_schema.COLUMNS t where t.`TABLE_SCHEMA` = \'', database_name, '\' and t.`TABLE_NAME` = \'', table_name, '\' and t.`COLUMN_NAME` = \'', column_name, '\';');
SET @sqlcounts := $sqltext;
PREPARE stmt FROM @sqlcounts;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
SET result_data = @column_info;
END
&
DROP PROCEDURE IF EXISTS `comparisonTableExist` &
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonTableExist(IN database_1 CHAR(20), IN database_2 CHAR(20), OUT info MEDIUMTEXT)
BEGIN
DECLARE database_name, table_name CHAR(200);
DECLARE this_info, database_table_no MEDIUMTEXT DEFAULT '';
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
DECLARE stopflag INT DEFAULT 0;
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME FROM information_schema.COLUMNS t;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
OPEN sql_resoult;
FETCH sql_resoult INTO database_name, table_name;
WHILE (stopflag=0) DO
BEGIN
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
CALL getTableCount(database_2, table_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表不存在;\n');
END IF;
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
FETCH sql_resoult INTO database_name, table_name;
END;
END WHILE;
CLOSE sql_resoult;
ELSE
IF (database_count_1 = 0 AND database_count_2 = 0) THEN
SET this_info = CONCAT(database_1, '和', database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
IF (database_count_1 = 0) THEN
SET this_info = CONCAT(database_1, '數據庫不存在或?yàn)榭諗?shù)據庫');
ELSE
SET this_info = CONCAT(database_2, '數據庫不存在或?yàn)榭諗?shù)據庫');
END IF;
END IF;
END IF;
SET info=this_info;
END
&
DROP PROCEDURE IF EXISTS `comparisonColumnExist` &
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonColumnExist(IN database_1 CHAR(20), IN database_2 CHAR(20), OUT info MEDIUMTEXT)
BEGIN
DECLARE database_name, table_name, column_name CHAR(200);
DECLARE this_info, database_table_no TEXT DEFAULT '';
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
DECLARE stopflag INT DEFAULT 0;
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME, t.COLUMN_NAME FROM information_schema.COLUMNS t;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
OPEN sql_resoult;
FETCH sql_resoult INTO database_name, table_name, column_name;
WHILE (stopflag=0) DO
BEGIN
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
CALL getTableCount(database_2, table_name, resoult_count);
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_2, table_name, column_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_2, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_2, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_1, table_name, column_name, resoult_count);
IF (resoult_count = 0) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(database_1, '的', table_name, '表的', column_name, '列不存在;\n');
ELSE
SET this_info=CONCAT(this_info, database_1, '的', table_name, '表的', column_name, '列不存在;\n');
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
FETCH sql_resoult INTO database_name, table_name, column_name;
END;
END WHILE;
CLOSE sql_resoult;
END IF;
SET info=this_info;
END
&
DROP PROCEDURE IF EXISTS `comparisonColumnInfo` &
CREATE DEFINER=`root`@`localhost` PROCEDURE comparisonColumnInfo(IN database_1 CHAR(20), IN database_2 CHAR(20),OUT info MEDIUMTEXT)
BEGIN
DECLARE database_name, table_name, column_name, collation_name, result_data_1, result_data_2, column_info CHAR(200);
DECLARE this_info, database_table_no MEDIUMTEXT DEFAULT '';
DECLARE database_count_1, database_count_2, resoult_count INT DEFAULT 0;
DECLARE stopflag INT DEFAULT 0;
DECLARE sql_resoult CURSOR FOR SELECT t.TABLE_SCHEMA, t.TABLE_NAME, t.COLUMN_NAME, t.COLLATION_NAME FROM information_schema.COLUMNS t;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET stopflag=1;
CALL getdatabaseCount(database_1, database_count_1);
CALL getdatabaseCount(database_2, database_count_2);
IF (database_count_1 <> 0 AND database_count_2 <> 0) THEN
OPEN sql_resoult;
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
WHILE (stopflag=0) DO
BEGIN
IF (database_name=database_1 AND INSTR(database_table_no, CONCAT(database_2, '_', table_name)) = 0) THEN
CALL getTableCount(database_2, table_name, resoult_count);
IF (resoult_count <> 0) THEN
CALL getColumnCount(database_2, table_name, column_name, resoult_count);
IF (resoult_count <> 0) THEN
SET column_info = 'DATA_TYPE';
CALL getColumnInfo(database_1, table_name, column_name, column_info, result_data_1);
CALL getColumnInfo(database_2, table_name, column_name, column_info, result_data_2);
IF (result_data_1 <> result_data_2) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
ELSE
SET this_info=CONCAT(this_info, table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
END IF;
END IF;
SET column_info = 'CHARACTER_SET_NAME';
CALL getColumnInfo(database_1, table_name, column_name, column_info, result_data_1);
CALL getColumnInfo(database_2, table_name, column_name, column_info, result_data_2);
IF (result_data_1 <> result_data_2) THEN
IF (this_info IS NULL OR this_info='') THEN
SET this_info=CONCAT(table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
ELSE
SET this_info=CONCAT(this_info, table_name, '表的', column_name, '列的', column_info, '不一樣;\n');
END IF;
END IF;
END IF;
ELSE
SET database_table_no=CONCAT(database_table_no, ';', database_2, '_', table_name, ';');
END IF;
ELSE
IF (database_name=database_2 AND INSTR(database_table_no, CONCAT(database_1, '_', table_name)) = 0) THEN
CALL getTableCount(database_1, table_name, resoult_count);
IF (resoult_count = 0) THEN
SET database_table_no=CONCAT(database_table_no, ';', database_1, '_', table_name, ';');
END IF;
END IF;
END IF;
FETCH sql_resoult INTO database_name, table_name, column_name, collation_name;
END;
END WHILE;
CLOSE sql_resoult;
END IF;
SET info=this_info;
END
&
DELIMITER ;
SET @database_1='my_test3';
SET @database_2='my_test4';
SET @tableExistInfo='';
SET @columnExistInfo='';
SET @columnInfo='';
CALL comparisonTableExist(@database_1, @database_2, @tableExistInfo);
CALL comparisonColumnExist(@database_1, @database_2, @columnExistInfo);
CALL comparisonColumnInfo(@database_1, @database_2, @columnInfo);
SET @info=CONCAT(@tableExistInfo, '\n', @columnExistInfo, '\n', @columnInfo);
SELECT @info;
DROP PROCEDURE IF EXISTS `comparisonColumnInfo`;
DROP PROCEDURE IF EXISTS `comparisonColumnExist`;
DROP PROCEDURE IF EXISTS `comparisonTableExist`;
DROP PROCEDURE IF EXISTS `getColumnInfo`;
DROP PROCEDURE IF EXISTS `getColumnCount`;
DROP PROCEDURE IF EXISTS `getTableCount`;
DROP PROCEDURE IF EXISTS `getdatabaseCount`;總結
本篇文章就到這里了，希望能夠給你帶來幫助，也希望您能夠多多關注腳本之家的更多內容!
您可能感興趣的文章:
- MySql數據庫單表查詢與多表連接查詢效率對比
- Mysql數據庫支持的存儲引擎對比
- php使用mysqli和pdo擴展，測試對比mysql數據庫的執行效率完整示例
- php使用mysqli和pdo擴展，測試對比連接mysql數據庫的效率完整示例
- MySQL數據庫三種常用存儲引擎特性對比
- PHP數據庫連接mysql與mysqli對比分析
相關文章
Mysql中Table ‘XXX’ is marked as crashed and last (automatic?)
這篇文章主要介紹了Mysql中Table ‘XXX’ is marked as crashed and last (automatic?)問題解決方法,需要的朋友可以參考下2014-05-05
這篇文章主要介紹了MySQL 全文索引的原理與缺陷，幫助大家更好的理解和使用MySQL中的索引，感興趣的朋友可以了解下2020-12-12
mysql函數group_concat()返回結果不全問題
文章介紹了MySQL中使用group_concat()函數拼接返回字段時遇到的字符長度問題,分析了問題原因,并提供了兩種解決方法：臨時修改group_concat_max_len配置和永久修改MySQL配置文件2024-11-11
MySQL是一種關系型數據庫管理系統,最常用的版本是5.6和5.7,mysql5.7是5.6的新版本,在沒有減少功能的情況下新增了功能與進行了優化,例如新增了新的優化器、原生JSON支持、多源復制,還優化了整體的性能、GIS空間擴展、InnoDB...2024-03-03
MySQL(community版)壓縮包安裝的超詳細教程
這篇文章詳細介紹了如何在Windows系統上手動安裝MySQL?8.0.26的壓縮包版本,包括下載、解壓、配置環境變量、初始化、啟動服務、設置密碼等步驟,同時,還提供了一個簡單的SQL基礎教程,需要的朋友可以參考下2025-03-03
這篇文章主要介紹MySQL 主鍵與索引的聯系與區別，使用mysql的朋友可以看下2013-02-02
將mysql腳本轉化為oracle腳本的攻略與細節點
前段時間公司項目數據庫需要從mysql轉為oracle,所以需要修改下原有的mysql腳本,這篇文章主要給大家介紹了關于將mysql腳本轉化為oracle腳本的攻略與細節點,需要的朋友可以參考下2023-09-09
SQL Server數據庫錯誤5123解決方案
這篇文章主要介紹了SQL Server數據庫錯誤5123解決方案,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-06-06
在SQL查詢中,經常需要按多個字段對結果進行排序,本文主要介紹了MySql查詢中按多個字段排序的方法,具有一定的參考價值,感興趣的可以了解一下2024-03-03
在實際的項目開發中有時會有對數據庫某字段截取部分的需求,這種場景有時直接通過數據庫操作來實現比通過代碼實現要更方便快捷些,這篇文章主要給大家介紹了關于MySQL實現字符串截取的相關資料,需要的朋友可以參考下2022-03-03