tk-mybatis整合springBoot使用兩個數據源的方法

更新時間：2021年12月01日 10:52:15 作者：Dark_Zhou

單純的使用mybaits進行多數據配置網上資料很多，但是關于tk-mybaits多數據源配置沒有相關材料，本文就詳細的介紹一下如何使用，感興趣的可以了解一下

單純的使用mybaits進行多數據配置網上資料很多，但由于前期為了方便開發，采用了tk-mybaits。關于tk-mybaits多數據源配置沒有相關材料，官方也沒有提供相關功能說明，所以最終采用mybatis+tk-mybaits分別使用的策略進行多數據源配置功能實現。具體代碼如下

一、配置連接信息

#開發運行環境數據庫
spring.datasource.local.url=jdbc:mysql://0.0.0.0:3306/zhdd
spring.datasource.local.username=root
spring.datasource.local.password=
spring.datasource.local.driver-class-name=com.mysql.jdbc.Driver
spring.datasource.local.druid.initial-size=1
spring.datasource.local.druid.min-idle=1
spring.datasource.local.druid.max-active=20
spring.datasource.local.druid.test-on-borrow=true
spring.datasource.local.druid.stat-view-servlet.allow=true
 
#第三方對接通用數據庫
spring.datasource.public.url=jdbc:mysql://0.0.0.0:3306/zhdd
spring.datasource.public.username=root
spring.datasource.public.password=
spring.datasource.public.driver-class-name=com.mysql.jdbc.Driver
spring.datasource.public.druid.initial-size=1
spring.datasource.public.druid.min-idle=1
spring.datasource.public.druid.max-active=20
spring.datasource.public.druid.test-on-borrow=true
spring.datasource.public.druid.stat-view-servlet.allow=true

?二、配置DataSource數據源

?注意兩個數據源中有一個是為主數據源，需要增加一個@Primary注解，有且只能有一個需要。關于2個以上數據源沒有額外再進行研究了，不過利用mybatis再額外配置多個數據源應該可以實現

1.數據源1配置

package com.hiynn.core.mybatis;
 
import com.alibaba.druid.spring.boot.autoconfigure.DruidDataSourceBuilder;
import org.apache.ibatis.session.SqlSessionFactory;
import org.mybatis.spring.SqlSessionFactoryBean;
import org.springframework.beans.factory.annotation.Qualifier;
import org.springframework.boot.context.properties.ConfigurationProperties;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Primary;
import org.springframework.core.io.support.PathMatchingResourcePatternResolver;
import org.springframework.jdbc.datasource.DataSourceTransactionManager;
 
import javax.sql.DataSource;
 
/**
 * 開發運行環境數據庫
 */
@Configuration
public class LocalDataSourceConfig {
 
    @Bean(name = "localDataSource")
    @ConfigurationProperties(prefix = "spring.datasource.local")
    @Primary
    public DataSource localDataSource() {
        return DruidDataSourceBuilder.create().build();
    }
 
    @Bean(name = "localTransactionManager")
    @Primary
    public DataSourceTransactionManager mysqlTransactionManager() {
        return new DataSourceTransactionManager(localDataSource());
    }
 
    @Bean(name = "localSqlSessionFactory")
    @Primary
    public SqlSessionFactory mysqlSqlSessionFactory(@Qualifier("localDataSource") DataSource dataSource)
            throws Exception {
        SqlSessionFactoryBean sessionFactory = new SqlSessionFactoryBean();
        sessionFactory.setDataSource(dataSource);
        //如果不使用xml的方式配置mapper，則可以省去下面這行mapper location的配置。
        sessionFactory.setMapperLocations(new PathMatchingResourcePatternResolver()
                .getResources("classpath*:mapper/*.xml"));
        return sessionFactory.getObject();
    }
}

2.數據源2配置

package com.hiynn.core.mybatis;
 
import com.alibaba.druid.spring.boot.autoconfigure.DruidDataSourceBuilder;
import org.apache.ibatis.session.SqlSessionFactory;
import org.mybatis.spring.SqlSessionFactoryBean;
import org.springframework.beans.factory.annotation.Qualifier;
import org.springframework.boot.context.properties.ConfigurationProperties;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.core.io.support.PathMatchingResourcePatternResolver;
import org.springframework.jdbc.datasource.DataSourceTransactionManager;
 
import javax.sql.DataSource;
 
/**
 * 公共通用數據庫
 */
@Configuration
public class PublicDataSourceConfig {
 
    @Bean(name = "publicDataSource")
    @ConfigurationProperties(prefix = "spring.datasource.public")
    public DataSource publicDataSource() {
        return DruidDataSourceBuilder.create().build();
    }
 
    @Bean(name = "publicTransactionManager")
    public DataSourceTransactionManager mysqlTransactionManager() {
        return new DataSourceTransactionManager(publicDataSource());
    }
 
    @Bean(name = "publicSqlSessionFactory")
    public SqlSessionFactory mysqlSqlSessionFactory(@Qualifier("publicDataSource") DataSource dataSource)
            throws Exception {
        SqlSessionFactoryBean sessionFactory = new SqlSessionFactoryBean();
        sessionFactory.setDataSource(dataSource);
        //如果不使用xml的方式配置mapper，則可以省去下面這行mapper location的配置。
        sessionFactory.setMapperLocations(new PathMatchingResourcePatternResolver()
                .getResources("classpath*:mapper2/*.xml"));
        return sessionFactory.getObject();
    }
}

三、Application配置

package com.hiynn.core;
 
//特別注意，下面的是 tk.MapperScan
 
import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.boot.web.servlet.ServletComponentScan;
import org.springframework.boot.web.servlet.support.SpringBootServletInitializer;
import org.springframework.transaction.annotation.EnableTransactionManagement;
import springfox.documentation.swagger2.annotations.EnableSwagger2;
import tk.mybatis.spring.annotation.MapperScan;
 
/**
 * @author zz
 * @date 2018-7-2
 */
@ServletComponentScan
@SpringBootApplication
@EnableTransactionManagement
@EnableSwagger2
@MapperScan(basePackages = "com.hiynn.core.**.mapper",sqlSessionFactoryRef = "localSqlSessionFactory")
@org.mybatis.spring.annotation.MapperScan(basePackages = "com.hiynn.core.**.mapper2",sqlSessionFactoryRef = "publicSqlSessionFactory")
public class Application extends SpringBootServletInitializer{
    public static void main(String[] args) {
        SpringApplication.run(Application.class, args);
    }
}

四、Mapper代碼結構

補充：

一、解決mybatis數據庫駝峰命名自動映射問題以及sql語句打印問題，通過讀取配置文件實現。兩個數據源都需要設置

    @Bean(name = "localSqlSessionFactory")
    @Primary
    public SqlSessionFactory mysqlSqlSessionFactory(@Qualifier("localDataSource") DataSource dataSource)
            throws Exception {
        SqlSessionFactoryBean sessionFactory = new SqlSessionFactoryBean();
        sessionFactory.setDataSource(dataSource);
        //添加mybatis配置文件讀取功能更
        sessionFactory.setConfigLocation(new PathMatchingResourcePatternResolver().getResource("mybatis-config.xml"));
        //如果不使用xml的方式配置mapper，則可以省去下面這行mapper location的配置。
        sessionFactory.setMapperLocations(new PathMatchingResourcePatternResolver()
                .getResources("classpath*:mapper/*.xml"));
        return sessionFactory.getObject();
    }

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE configuration PUBLIC "-//mybatis.org//DTD Config 3.0//EN"
        "http://mybatis.org/dtd/mybatis-3-config.dtd">
<configuration>
    <settings>
        <setting name="mapUnderscoreToCamelCase" value="true" />
        <!-- 打印查詢語句 -->
        <setting name="logImpl" value="STDOUT_LOGGING" />
    </settings>
</configuration>

二、配置PageHelper分頁插件，在application.properties統一配置

數據庫方言 指定分頁插件使用哪種數據庫方言
pagehelper.helperDialect=mysql
#分頁參數合理化 pageNum<=0 時會查詢第一頁， pageNum>pages（超過總數時），會查詢最后一頁
pagehelper.reasonable=true
pagehelper.supportMethodsArguments=true
pagehelper.params=count=countSql

到此這篇關于tk-mybatis整合springBoot使用兩個數據源的方法的文章就介紹到這了,更多相關tk-mybatis springBoot數據源內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: