Ubuntu搭建Mysql+Keepalived高可用的實現(雙主熱備)

更新時間：2021年11月30日 15:48:42 作者：程序員茍哥

本文主要介紹了Ubuntu搭建Mysql+Keepalived高可用的實現(雙主熱備)，文中通過示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下

Mysql5.5雙機熱備

實現方案

安裝兩臺Mysql

安裝Mysql5.5

sudo apt-get update

apt-get install aptitude
aptitude install mysql-server-5.5
或
sudo apt-cache search mariadb-server
apt-get install -y mariadb-server-5.5

卸載

sudo apt-get remove mysql-*
dpkg -l |grep ^rc|awk '{print $2}' |sudo xargs dpkg -P

配置權限

vim /etc/mysql/my.cnf
#bind-address = 127.0.0.1

mysql -u root -p
grant all on *.* to root@'%' identified by 'root' with grant option;
flush privileges;

配置兩臺Mysql主主同步

配置節點1

vim /etc/mysql/my.cnf

server-id       = 1                                            #節點ID
log_bin         = mysql-bin.log               #日志 
binlog_format   = "ROW"                                    #日志格式
auto_increment_increment = 2                        #自增ID間隔(=節點數，防止ID沖突)
auto_increment_offset  = 1                            #自增ID起始值(節點ID)
binlog_ignore_db=mysql                                    #不同步的數據庫
binlog_ignore_db=information_schema
binlog_ignore_db=performance_schema

重啟mysql

service mysql restart
mysql -u root -p

記錄節點1的binlog日志位置

show master status;
mysql-bin.000001    245        mysql,information_schema,performance_schema

配置節點2

vim /etc/mysql/my.cnf

server-id       = 2
log_bin         = mysql-bin.log                    
relay_log       = mysql-relay-bin.log        #中繼日志
log_slave_updates = ON                                  #中繼日志執行后，變化計入日志
read_only       = 0
binlog_format   = "ROW"
auto_increment_increment = 2
auto_increment_offset  = 2
binlog_ignore_db=mysql
binlog_ignore_db=information_schema
binlog_ignore_db=performance_schema
replicate_ignore_db=mysql
replicate_ignore_db=information_schema
replicate_ignore_db=performance_schema

配置主從

mysql -u root -p

CHANGE MASTER TO 
       MASTER_HOST='192.168.1.21', 
       MASTER_USER='root', 
       MASTER_PASSWORD='root', 
       MASTER_LOG_FILE='mysql-bin.000001', 
       MASTER_LOG_POS=245;

#開啟同步
start slave

#查看同步狀態 Slave_IO_Running和Slave_SQL_Running需要均為Yes       
show slave status;

記錄節點2的binlog日志位置

show master status;

mysql-bin.000001    1029        mysql,information_schema,performance_schema

配置主主（節點1）

vim /etc/mysql/my.cnf

relay_log       = mysql-relay-bin.log
log_slave_updates = ON
read_only       = 0
replicate_ignore_db=mysql
replicate_ignore_db=information_schema
replicate_ignore_db=performance_schema

開啟同步

mysql -u root -p

CHANGE MASTER TO 
       MASTER_HOST='192.168.1.20', 
       MASTER_USER='root', 
       MASTER_PASSWORD='root', 
       MASTER_LOG_FILE='mysql-bin.000001', 
       MASTER_LOG_POS=1029;

#開啟同步
start slave

#查看同步狀態 Slave_IO_Running和Slave_SQL_Running需要均為Yes       
show slave status;

異常處理

Could not initialize master info structure, more error messages can be found in the MySQL error log
解決：reset slave

安裝配置Keepalived

安裝Keepalived

#依賴
sudo apt-get install -y libssl-dev
sudo apt-get install -y openssl 
sudo apt-get install -y libpopt-dev
sudo apt-get install -y libnl-dev libnl-3-dev libnl-genl-3.dev
apt-get install daemon
apt-get install libc-dev
apt-get install libnfnetlink-dev
apt-get install libnl-genl-3.dev

#安裝
apt-get install keepalived

#編譯安裝
cd /usr/local
wget https://www.keepalived.org/software/keepalived-2.2.2.tar.gz
tar -zxvf keepalived-2.2.2.tar.gz 
mv keepalived-2.2.2 keepalived
./configure --prefix=/usr/local/keepalived
sudo make && make install

#開啟日志
sudo vim /etc/rsyslog.d/50-default.conf 

*.=info;*.=notice;*.=warn;\
        auth,authpriv.none;\
        cron,daemon.none;\
        mail,news.none          -/var/log/messages
        
sudo service rsyslog restart 
tail -f /var/log/messages

sudo mkdir /etc/sysconfig
sudo cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
sudo cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
sudo cp /usr/local/keepalived/sbin/keepalived /sbin/
sudo mkdir /etc/keepalived
sudo cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

配置節點信息

節點1 192.168.1.21

vim /etc/keepalived/keepalived.conf

global_defs {
   router_id MYSQL_HA　　#當前節點名
}
vrrp_instance VI_1 {    
    state BACKUP         #兩臺配置節點均為BACKUP
    interface eth0       #綁定虛擬IP的網絡接口
    virtual_router_id 51 #VRRP組名，兩個節點的設置必須一樣，以指明各個節點屬于同一VRRP組
    priority 101         #節點的優先級,另一臺優先級改低一點
    advert_int 1         #組播信息發送間隔，兩個節點設置必須一樣
    nopreempt            #不搶占，只在優先級高的機器上設置即可，優先級低的機器不設置
    authentication {      #設置驗證信息，兩個節點必須一致
        auth_type PASS
        auth_pass 123456
    }
    virtual_ipaddress {   #指定虛擬IP,兩個節點設置必須一樣
        192.168.1.111
    }
}
virtual_server 192.168.1.111 3306 {   #linux虛擬服務器(LVS)配置 
    delay_loop 2     #每個2秒檢查一次real_server狀態
    lb_algo wrr      #LVS調度算法,rr|wrr|lc|wlc|lblc|sh|dh
    lb_kind DR      #LVS集群模式 ,NAT|DR|TUN
    persistence_timeout 60    #會話保持時間
    protocol TCP    #使用的協議是TCP還是UDP

    real_server 192.168.1.21 3306 {
        weight 3   #權重
        notify_down  /usr/local/bin/mysql.sh    #檢測到服務down后執行的腳本
        TCP_CHECK {
            connect_timeout 10   #連接超時時間
            nb_get_retry 3      #重連次數
            delay_before_retry 3 #重連間隔時間
            connect_port 3306    #健康檢查端口
        }
    }    
}

節點2 192.168.1.20

vim /etc/keepalived/keepalived.conf

global_defs {
   router_id MYSQL_HA　　#當前節點名
}
vrrp_instance VI_1 {
    state BACKUP         #兩臺配置節點均為BACKUP
    interface eth0       #綁定虛擬IP的網絡接口
    virtual_router_id 51 #VRRP組名，兩個節點的設置必須一樣，以指明各個節點屬于同一VRRP組
    priority 100         #節點的優先級,另一臺優先級改低一點
    advert_int 1         #組播信息發送間隔，兩個節點設置必須一樣
    nopreempt            #不搶占，只在優先級高的機器上設置即可，優先級低的機器不設置
    authentication {      #設置驗證信息，兩個節點必須一致
        auth_type PASS
        auth_pass 123456
    }
    virtual_ipaddress {   #指定虛擬IP,兩個節點設置必須一樣
        192.168.1.111
    }
}
virtual_server 192.168.1.111 3306 {   #linux虛擬服務器(LVS)配置
    delay_loop 2     #每個2秒檢查一次real_server狀態
    lb_algo wrr      #LVS調度算法,rr|wrr|lc|wlc|lblc|sh|dh
    lb_kind DR      #LVS集群模式 ,NAT|DR|TUN
    persistence_timeout 60    #會話保持時間
    protocol TCP    #使用的協議是TCP還是UDP

    real_server 192.168.1.20 3306 {
        weight 3   #權重
        notify_down  /usr/local/bin/mysql.sh    #檢測到服務down后執行的腳本
        TCP_CHECK {
            connect_timeout 10   #連接超時時間
            nb_get_retry 3      #重連次數
            delay_before_retry 3 #重連間隔時間
            connect_port 3306    #健康檢查端口
        }
    }
}

編寫異常處理腳本

vim /usr/local/bin/mysql.sh

#!/bin/sh
killall keepalived

分配權限

chmod +x /usr/local/bin/mysql.sh
###測試
重啟keepalived

service keepalived restart

查看日志

tail -f /var/log/messages

查看虛擬IP

ip addr  #或ip a 或ifconfig

#主節點會有虛擬IP
eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:9e:17:53:e5 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.21/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 192.168.1.111/32 scope global eth0
       valid_lft forever preferred_lft forever

關閉主節點的mysql服務

service mysql stop

日志信息

#主節點
Aug 10 15:00:30 i-7jaope92 Keepalived_healthcheckers[4949]: TCP connection to [192.168.1.20]:3306 failed !!!
Aug 10 15:00:30 i-7jaope92 Keepalived_healthcheckers[4949]: Removing service [192.168.1.20]:3306 from VS [192.168.1.111]:3306
Aug 10 15:00:30 i-7jaope92 Keepalived_healthcheckers[4949]: Executing [/usr/local/bin/mysql.sh] for service [192.168.1.20]:3306 in VS [192.168.1.111]:3306
Aug 10 15:00:30 i-7jaope92 Keepalived_healthcheckers[4949]: Lost quorum 1-0=1 > 0 for VS [192.168.1.111]:3306
Aug 10 15:00:30 i-7jaope92 Keepalived_vrrp[4950]: VRRP_Instance(VI_1) sending 0 priority
Aug 10 15:00:30 i-7jaope92 kernel: [100918.976041] IPVS: __ip_vs_del_service: enter

#從節點
Aug 10 15:00:31 i-6gxo6kx7 Keepalived_vrrp[718]: VRRP_Instance(VI_1) Transition to MASTER STATE
Aug 10 15:00:32 i-6gxo6kx7 Keepalived_vrrp[718]: VRRP_Instance(VI_1) Entering MASTER STATE

虛擬IP從主節點漂移到從節點

ip a

eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:9e:e7:26:5c brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.20/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 192.168.1.111/32 scope global eth0
       valid_lft forever preferred_lft forever

Mysql連接測試

mysql -h 192.168.1.111 -u root -p

到此這篇關于Ubuntu搭建Mysql+Keepalived高可用的實現(雙主熱備)的文章就介紹到這了,更多相關Mysql+Keepalived高可用內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: