Android 控制車載藍牙播放音樂詳解流程
需求：手機端音樂暫停和播放狀態從服務端告訴客戶端、設備端實現暫停、播放、上一首、下一首等功能
代碼路徑：
packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerService.java
packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerStateMachine.java
packages/apps/Bluetooth/src/com/android/bluetooth/a2dpsink/A2dpSinkService.java
packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerService.java
packages/apps/Bluetooth/jni/com_android_bluetooth_avrcp_controller.cpp
一、藍牙音樂播放狀態
1、在AvrcpControllerService.java文件中onPlayStatusChanged()方法就是音樂播放狀態改變，該方法是由JNI層中com_android_bluetooth_avrcp_controller.cpp中調用java層的
private synchronized void onPlayStatusChanged(byte[] address, byte playStatus) {
if (DBG) {
Log.d(TAG, "onPlayStatusChanged " + playStatus);
}
int playbackState = PlaybackState.STATE_NONE;
switch (playStatus) {
case JNI_PLAY_STATUS_STOPPED:
playbackState = PlaybackState.STATE_STOPPED;
break;
case JNI_PLAY_STATUS_PLAYING:
playbackState = PlaybackState.STATE_PLAYING;
break;
case JNI_PLAY_STATUS_PAUSED:
playbackState = PlaybackState.STATE_PAUSED;
break;
case JNI_PLAY_STATUS_FWD_SEEK:
playbackState = PlaybackState.STATE_FAST_FORWARDING;
break;
case JNI_PLAY_STATUS_REV_SEEK:
playbackState = PlaybackState.STATE_REWINDING;
break;
default:
playbackState = PlaybackState.STATE_NONE;
}
BluetoothDevice device = BluetoothAdapter.getDefaultAdapter().getRemoteDevice(address);
AvrcpControllerStateMachine stateMachine = getStateMachine(device);
if (stateMachine != null) {
stateMachine.sendMessage(
AvrcpControllerStateMachine.MESSAGE_PROCESS_PLAY_STATUS_CHANGED, playbackState);
}
}
2、在AvrcpControllerStateMachine.java文件中Connected類中
MESSAGE_PROCESS_PLAY_STATUS_CHANGED消息就是處理播放狀態的，然后通過廣播方式把該狀態發送出去
case MESSAGE_PROCESS_PLAY_STATUS_CHANGED:
if (SystemProperties.get("persist.ivi.feature", "0").equals("1")) {
A2dpSinkService a2dpSinkService = A2dpSinkService.getA2dpSinkService();
Log.d(TAG, "the state: " + msg.arg1);
if (a2dpSinkService != null && msg.arg1 != preAudioStatus) {
preAudioStatus = msg.arg1;
Log.d(TAG, "preAudioStatus: " + msg.arg1);
if (msg.arg1 == PlaybackState.STATE_PLAYING) {
//播放
a2dpSinkService.informPlayState(mDevice, true);
} else if (msg.arg1 == PlaybackState.STATE_PAUSED) {
//暫停
a2dpSinkService.informPlayState(mDevice, false);
}
}
}
Intent intent = new Intent("zqc.bluetooth.PLAY_STATUS_CHANGED");
intent.putExtra("zqc.bluetooth.PLAYBACK", msg.arg1);
mService.sendBroadcast(intent);
mAddressedPlayer.setPlayStatus(msg.arg1);
BluetoothMediaBrowserService.notifyChanged(mAddressedPlayer.getPlaybackState());
if (mAddressedPlayer.getPlaybackState().getState()
== PlaybackState.STATE_PLAYING
&& A2dpSinkService.getFocusState() == AudioManager.AUDIOFOCUS_NONE
&& !shouldRequestFocus()) {
sendMessage(MSG_AVRCP_PASSTHRU,
AvrcpControllerService.PASS_THRU_CMD_ID_PAUSE);
}
return true;
二、藍牙音樂中怎么獲取音樂信息
1、在AvrcpControllerService.java文件中onTrackChanged()方法中是獲取JNI層上報的音樂信息，該方法是由JNI層中com_android_bluetooth_avrcp_controller.cpp中調用java層的
private synchronized void onTrackChanged(byte[] address, byte numAttributes, int[] attributes,
String[] attribVals) {
if (DBG) {
Log.d(TAG, "onTrackChanged");
}
BluetoothDevice device = BluetoothAdapter.getDefaultAdapter().getRemoteDevice(address);
AvrcpControllerStateMachine stateMachine = getStateMachine(device);
//該方法就是把藍牙音樂的信息傳遞給java層
getElementAttrRsp(attributes,attribVals,numAttributes);
if (stateMachine != null) {
stateMachine.sendMessage(AvrcpControllerStateMachine.MESSAGE_PROCESS_TRACK_CHANGED,
TrackInfo.getMetadata(attributes, attribVals));
}
}
2、在AvrcpControllerService.java文件中g(shù)etElementAttrRsp()中，然后通過該方法中通過廣播告訴出去
private void getElementAttrRsp(int[] attr_id,String[] textArray,byte num_attr){
String artist = null;
String trackTitle = null;
String album = null;
for (int i = 0; i < num_attr; i++){
switch (attr_id[i]) {
case JNI_MEDIA_ATTR_ID_TITLE:
trackTitle = textArray[i];
if (trackTitle == null){
trackTitle = "Unknown";
}
break;
case JNI_MEDIA_ATTR_ID_ARTIST:
artist = textArray[i];
if (artist == null){
artist = "Unknown";
}
break;
case JNI_MEDIA_ATTR_ID_ALBUM:
album = textArray[i];
if (album == null){
album = "Unknown";
}
break;
}
}
Intent intent = new Intent("com.android.getelementattrrsp");
intent.putExtra("artist", artist);
intent.putExtra("trackTitle",trackTitle);
intent.putExtra("album",album);
Log.d(TAG,"getElementAttrRsp,artist: " + artist + ",trackTitle: " + trackTitle + ",album: " + album);
intent.addFlags(Intent.FLAG_RECEIVER_FOREGROUND);
sendBroadcast(intent, ProfileService.BLUETOOTH_PERM);
}
三、設備藍牙音樂中上一首、下一首、暫停功能控制手機端
1、在AvrcpControllerService.java文件中sendPassThroughCmd()方法來控制暫停、播放、上一首、下一首等功能
public synchronized void sendPassThroughCmd(BluetoothDevice device, int keyCode, int keyState) {
Log.v(TAG, "sendPassThroughCmd keyCode: " + keyCode + " keyState: " + keyState);
if (device == null) {
Log.e(TAG, "sendPassThroughCmd Device is null");
return;
}
AvrcpControllerStateMachine stateMachine = getStateMachine(device);
if (stateMachine != null) {
stateMachine.sendMessage(AvrcpControllerStateMachine.MESSAGE_SEND_PASS_THROUGH_CMD,
keyCode, keyState, device);
}
}
2、在AvrcpControllerStateMachine.java文件中MESSAGE_SEND_PASS_THROUGH_CMD變量中通過JNI層來實現功能
case MESSAGE_SEND_PASS_THROUGH_CMD:
BluetoothDevice device = (BluetoothDevice) msg.obj;
mService.sendPassThroughCommandNative(Utils.getByteAddress(device), msg.arg1,
msg.arg2);
return true;
到此這篇關于Android 控制車載藍牙播放音樂詳解流程的文章就介紹到這了,更多相關Android 控制車載藍牙 內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Android實現登錄注冊界面框架
這篇文章主要介紹了Android實現登錄注冊界面的框架，本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-09-09
優化和瘦身Android APK的六個小技巧
Android應用的大小對用戶體驗和應用性能至關重要,大型APK文件會增加應用的安裝時間,啟動時間和頁面加載時間,降低了用戶體驗,因此,APK瘦身是Android開發中的重要任務,在本文中,我們將分享6個小技巧,幫助你優化和瘦身Android應用,需要的朋友可以參考下2023-11-11
Android App開發中將View或Drawable轉為Bitmap的方法
這篇文章主要介紹了Android App開發中將View或Drawable轉為Bitmap的方法,其中View轉換時作者特別提到了getDrawingCache=null問題的解決方法,需要的朋友可以參考下2016-03-03
這篇文章主要為大家詳細介紹了Android自定義Dialog框樣式，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-06-06
這篇文章主要介紹了Android自動獲取短信驗證碼功能,通過自定義短信監聽器用于自動填充驗證碼功能，具體實現代碼大家可以參考下本文2017-04-04
Android MPAndroidChart開源庫圖表之折線圖的實例代碼
這篇文章主要介紹了Android MPAndroidChart開源庫圖表之折線圖的實例代碼，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2018-05-05
Android實現短信驗證碼自動填寫
這篇文章主要為大家詳細介紹了Android短信驗證碼自動填寫功能的實現過程，感興趣的小伙伴們可以參考一下2016-08-08
Android SpringAnimation彈性動畫解析
這篇文章主要為大家詳細介紹了Android SpringAnimation彈性動畫，具有一定的參考價值，感興趣的小伙伴們可以參考一下2017-03-03
Android自定義View app更新動畫詳解
這篇文章給大家分享了Android自定義View app更新動畫的相關代碼以及知識點內容，有興趣的朋友參考學習下。2018-07-07
Android開發中Activity之間切換出現短暫黑屏的解決方法
這篇文章主要介紹了Android開發中Activity之間切換出現短暫黑屏的解決方法,較為詳細的分析了Android中Activity之間切換出現短暫黑屏的原因與解決方法,需要的朋友可以參考下2016-02-02