redis不能訪問本機真實ip地址的解決方案
redis無法訪問本機真實ip地址
1.我在進行用jedis來連接redis時出現了問題:
我用Jedis jedis = new Jedis("127.0.0.1",6379);可以成功連接,但是我如果把127.0.0.1換成的本機地址如192.168.1.103發現會報錯.
2.解決這個問題
要修改redis.windows.conf的配置文件(說明一下我的redis是在windows版的)
這里要改兩個地方:
- 1.修改bind的ip
- 2.修改protected-mode yes為protected-mode no
我的修改如下
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ bind 127.0.0.1 192.168.1.103 # Protected mode is a layer of security protection, in order to avoid that # Redis instances left open on the internet are accessed and exploited. # # When protected mode is on and if: # # 1) The server is not binding explicitly to a set of addresses using the # "bind" directive. # 2) No password is configured. # # The server only accepts connections from clients connecting from the # IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain # sockets. # # By default protected mode is enabled. You should disable it only if # you are sure you want clients from other hosts to connect to Redis # even if no authentication is configured, nor a specific set of interfaces # are explicitly listed using the "bind" directive. protected-mode no
上面的代碼可以看到我的修改了哪些東西,之后再嘗試連接一下。
無法通過ip訪問redis服務
嘗試在本機以及其他主機通過ip來訪問redis服務時,一直出現錯誤,無法通過IP訪問redis服務。
究其原因:
redis.conf文件中配置了訪問限制,通過bind來限制了ip訪問,默認為127.0.0.1
注釋掉bind之后,本地可以通過ip訪問,但是其他主機無法訪問,在redis3之后,有一個protected-mode 參數,默認開啟 yes,改成no,重啟服務即可。
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
Windows系統設置Redis服務使其開機自啟動
Redis是一種鍵值對數據庫,也稱為內存數據庫,因為它可以將數據存儲在內存中,而不是在磁盤上,下面這篇文章主要給大家介紹了關于Windows系統設置Redis服務使其開機自啟動的相關資料,需要的朋友可以參考下2024-01-01
聊聊使用RedisTemplat實現簡單的分布式鎖的問題
這篇文章主要介紹了使用RedisTemplat實現簡單的分布式鎖問題,文中給大家介紹在SpringBootTest中編寫測試模塊的詳細代碼,需要的朋友可以參考下2021-11-11
從零搭建SpringBoot2.X整合Redis框架的詳細教程
這篇文章主要介紹了從零搭建SpringBoot2.X整合Redis框架的詳細教程,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-12-12

