快捷導航

Redis如何一鍵部署腳本

更新時間：2021年04月12日 10:33:19 作者：這閨女長得真俊啊

這篇文章主要介紹了Redis如何一鍵部署腳本，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

先將安裝包拖入/opt目錄

在這里插入圖片描述

注意：這里的腳本bind修改后為 0.0.0.0

bind修改后為bind 127.0.0.1 +服務器IP在下面

#!/bin/bash

#yum源
echo -e "\033[31m =====正在驗證當前為僅主機還是NAT模式===== \033[0m"
ping -c1 -W1 www.baidu.com &> /dev/null
if [ $? -eq 0 ];then echo -e "\033[31m 檢測當前為NAT模式，為您配置在線yum源 \033[0m"
mkdir -p /etc/yum.repos.d/repo.bak

mv -f /etc/yum.repos.d/* /etc/yum.repos.d/repo.bak &> /dev/null

wget -O /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo &> /dev/null

yum clean all &> /dev/null
yum list &> /dev/null
echo -e "\033[31m 在線源已配置完成 \033[0m"

else
echo -e "\033[31m 檢測當前為僅主機模式，為您配置本地yum源 \033[0m"
mount /dev/sr0 /mnt &> /dev/null
cd /etc/yum.repos.d/
mkdir -p /etc/yum.repos.d/repo.bak

mv -f /etc/yum.repos.d/* /etc/yum.repos.d/repo.bak &> /dev/null

echo '[local]
name=local
baseurl=file:///mnt
enabled=1
gpgcheck=0' > /etc/yum.repos.d/local.repo
yum clean all &> /dev/null
yum makecache &> /dev/null

df -h | grep "/mnt" 
if [ $? -ne 0 ];then
echo -e "\033[31m 檢測當前為僅主機模式，但光盤未連接！ \033[0m"
else
echo -e "\033[31m 本地yum源已配置完成 \033[0m"
fi
fi

#關閉防火墻
systemctl stop firewalld
setenforce 0
yum install -y gcc gcc-c++ make
rpm -q expect
rpm -q tcl
yum -y install expect
cd /opt
tar zxvf redis-5.0.7.tar.gz -C /opt/
cd /opt/redis-5.0.7/
make
make PREFIX=/usr/local/redis install
#由于Redis源碼包中直接提供了Makefile 文件，所以在解壓完軟件包后，不用先執行./configure進行配置，可直接執行make與make install 命令進行安裝。

#在/utils里執行軟件包提供的install_server.sh腳本文件設置Redis服務所需要的相關配置文件
cd /opt/redis-5.0.7/utils

#開始免交換執行
/usr/bin/expect <<EOF
#expect開始標志
spawn ./install_server.sh
#Please select the redis port for this instance: [6379]
expect "instance"
send "\r" 
#Please select the redis config file name [/etc/redis/6379.conf] 
expect "config"
send "\r"
#Please select the redis log file name [/var/log/redis_6379.log]
expect "log"
send "\r"
#Please select the data directory for this instance [/var/lib/redis/6379]
expect "data"
send "\r"
#Please select the redis executable path []
expect "executable"
send "/usr/local/redis/bin/redis-server\r"
#Is this ok? Then press ENTER to go on or Ctrl-C to abort.
expect "abort"
send "\r"
expect eof
EOF


ln -s /usr/local/redis/bin/* /usr/local/bin/
netstat -natp | grep redis

/etc/init.d/redis_6379 restart     
/etc/init.d/redis_6379 status   

sed -i '/bind 127.0.0.1/c bind 0.0.0.0' /etc/redis/6379.conf
sed -i 's/appendonly no/appendonly yes/' /etc/redis/6379.conf

/etc/init.d/redis_6379 restart
/etc/init.d/redis_6379 status

bind修改后為bind 127.0.0.1 +服務器IP腳本

#!/bin/bash

#yum源
echo -e "\033[31m =====正在驗證當前為僅主機還是NAT模式===== \033[0m"
ping -c1 -W1 www.baidu.com &> /dev/null
if [ $? -eq 0 ];then echo -e "\033[31m 檢測當前為NAT模式，為您配置在線yum源 \033[0m"
mkdir -p /etc/yum.repos.d/repo.bak

mv -f /etc/yum.repos.d/* /etc/yum.repos.d/repo.bak &> /dev/null

wget -O /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo &> /dev/null

yum clean all &> /dev/null
yum list &> /dev/null
echo -e "\033[31m 在線源已配置完成 \033[0m"

else
echo -e "\033[31m 檢測當前為僅主機模式，為您配置本地yum源 \033[0m"
mount /dev/sr0 /mnt &> /dev/null
cd /etc/yum.repos.d/
mkdir -p /etc/yum.repos.d/repo.bak

mv -f /etc/yum.repos.d/* /etc/yum.repos.d/repo.bak &> /dev/null

echo '[local]
name=local
baseurl=file:///mnt
enabled=1
gpgcheck=0' > /etc/yum.repos.d/local.repo
yum clean all &> /dev/null
yum makecache &> /dev/null

df -h | grep "/mnt" 
if [ $? -ne 0 ];then
echo -e "\033[31m 檢測當前為僅主機模式，但光盤未連接！ \033[0m"
else
echo -e "\033[31m 本地yum源已配置完成 \033[0m"
fi
fi

#防火墻關閉
systemctl stop firewalld
setenforce 0
yum install -y gcc gcc-c++ make
rpm -q expect
rpm -q tcl
yum -y install expect
cd /opt
tar zxvf redis-5.0.7.tar.gz -C /opt/
cd /opt/redis-5.0.7/
make
make PREFIX=/usr/local/redis install
#由于Redis源碼包中直接提供了Makefile 文件，所以在解壓完軟件包后，不用先執行./configure進行配置，可直接執行make與make install 命令進行安裝。

#在/utils里執行軟件包提供的install_server.sh腳本文件設置Redis服務所需要的相關配置文件
cd /opt/redis-5.0.7/utils

#開始免交換執行
/usr/bin/expect <<EOF
#expect開始標志
spawn ./install_server.sh
#Please select the redis port for this instance: [6379]
expect "instance"
send "\r" 
#Please select the redis config file name [/etc/redis/6379.conf] 
expect "config"
send "\r"
#Please select the redis log file name [/var/log/redis_6379.log]
expect "log"
send "\r"
#Please select the data directory for this instance [/var/lib/redis/6379]
expect "data"
send "\r"
#Please select the redis executable path []
expect "executable"
send "/usr/local/redis/bin/redis-server\r"
#Is this ok? Then press ENTER to go on or Ctrl-C to abort.
expect "abort"
send "\r"
expect eof
EOF


ln -s /usr/local/redis/bin/* /usr/local/bin/
netstat -natp | grep redis

/etc/init.d/redis_6379 restart     
/etc/init.d/redis_6379 status   


xyw=$(ip a | grep "ens33" | awk NR==2'{print$2}' |awk -F/ '{print$1}')
sed -i "/bind 127.0.0.1/c bind 127.0.0.1 $xyw" /etc/redis/6379.conf

sed -i 's/appendonly no/appendonly yes/' /etc/redis/6379.conf

/etc/init.d/redis_6379 restart
/etc/init.d/redis_6379 status

到此這篇關于Redis如何一鍵部署腳本的文章就介紹到這了,更多相關Redis 部署腳本內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: