如何用C#在PC上查找連接藍牙設備并實現數據傳輸
更新時間：2021年03月12日 08:45:55 作者：UP技術控
這篇文章主要介紹了如何用C#在PC上查找連接藍牙設備并實現數據傳輸，幫助大家更好的理解和學習使用c#，感興趣的朋友可以了解下
概述
在PC端用.NET開發一個藍牙下載的程序。實現在PC上查找周圍的藍牙設備（主要是手機），并將PC上的文件通過藍牙傳輸?shù)绞謾C(jī)上。目前我采用的是OpenNETCF.Net.Bluetooth，能夠正常發現周圍的藍牙設備，手機也能夠正常進行藍牙連接并接收文件。
代碼實現
1、查找周圍藍牙設備
BluetoothClient bc = new BluetoothClient();
BluetoothDeviceInfo[] bdi;
bdi = bc.DiscoverDevices(10);//查找周圍最多10個藍牙設備
if (bdi.Length == 0)
{
this.ShowErrMsg("請確認您的藍牙已開啟！");
return;
}
2、打開數據流
#region OBEXOpenStream
public bool OBEXOpenStream(string BTMAC)
{
// serial port UUID
Guid spguid = OpenNETCF.Net.Bluetooth.BluetoothService.ObexObjectPush;
OpenNETCF.Net.BluetoothAddress btaddress = OpenNETCF.Net.BluetoothAddress.Parse(BTMAC);
client = new OpenNETCF.Net.Sockets.BluetoothClient();
// define endpoint
OpenNETCF.Net.BluetoothEndPoint endpoint = new OpenNETCF.Net.BluetoothEndPoint(btaddress, spguid);
try
{
//open socket
client.Connect(endpoint);
}
catch
{
//unable to connect (server not listening on spguid)
return false;
}
//connect socket
stream = client.GetStream();
return true;
}
#endregion
3、配對連接
private bool OBEXConnect()
{
//send client request
byte[] ConnectPacket = new byte[7];
ConnectPacket[0] = 0x80; // Connect
ConnectPacket[1] = 0x00; // Packetlength Hi Byte
ConnectPacket[2] = 0x07; // Packetlength Lo Byte
ConnectPacket[3] = 0x10; // Obex v1
ConnectPacket[4] = 0x00; // no flags
ConnectPacket[5] = 0x20; // 8k max packet size Hi Byte
ConnectPacket[6] = 0x00; // 8k max packet size Lo Byte
stream.Write(ConnectPacket, 0, ConnectPacket.Length);
//listen for server response
byte[] ReceiveBufferA = new byte[3];
stream.Read(ReceiveBufferA, 0, 3);
if (ReceiveBufferA[0] == 160) // 0xa0
{
//success, decode rest of packet
int plength = (0xff * ReceiveBufferA[1]) + ReceiveBufferA[2]; //length of packet is...
//listen for rest of packet
byte[] ReceiveBufferB = new byte[plength - 3];
stream.Read(ReceiveBufferB, 0, plength - 3);
int obver = ReceiveBufferB[0]; //server obex version (16 = v1.0)
int cflags = ReceiveBufferB[1]; //connect flags
int maxpack = (0xff * ReceiveBufferB[2]) + ReceiveBufferB[3]; //max packet size
return true;
}
else
{
return false;
}
}
4、發送文本內容
//send client request, start put
string tName = "BRT優惠卷.txt";
string tType = "";
string tFileContent = "優惠卷內容:" + this.txtContent.Text.Trim();
int result = OBEXRequest("PUT", tName, tType, tFileContent);
if (result == 160)
{
SendSuccess = true;
}
完整代碼
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Net.Sockets;
using OpenNETCF;
using OpenNETCF.Net;
using OpenNETCF.Net.Bluetooth;
using OpenNETCF.Net.Sockets;
public partial class _Default : System.Web.UI.Page
{
//Stream stream;
NetworkStream stream;
OpenNETCF.Net.Sockets.BluetoothClient client;
protected void Page_Load(object sender, EventArgs e)
{
}
#region ShowErrMsg
private void ShowErrMsg(string err)
{
string str;
str = "<script language='javascript'>";
str += " alert('" + err + "')";
str += "</script>";
this.RegisterStartupScript("", str);
}
#endregion
protected void btnSend_Click(object sender, EventArgs e)
{
if (this.txtContent.Text.Trim() == string.Empty)
{
this.ShowErrMsg("請輸入發送內容！");
return;
}
BluetoothClient bc = new BluetoothClient();
BluetoothDeviceInfo[] bdi;
bdi = bc.DiscoverDevices(10);//查找周圍最多10個藍牙設備
if (bdi.Length == 0)
{
this.ShowErrMsg("請確認您的藍牙已開啟！");
return;
}
bool SendSuccess = false;
try
{
foreach (BluetoothDeviceInfo bd in bdi)
{
if (OBEXOpenStream(bd.DeviceID.ToString()))
{
if (OBEXConnect())
{
//send client request, start put
string tName = "BRT優惠卷.txt";
string tType = "";
string tFileContent = "優惠卷內容:" + this.txtContent.Text.Trim();
int result = OBEXRequest("PUT", tName, tType, tFileContent);
if (result == 160)
{
SendSuccess = true;
}
}
OBEXCloseStream();
}
else
{
this.ShowErrMsg("連接失敗！" + bd.DeviceName.ToString());
}
}
if (SendSuccess)
{
this.ShowErrMsg("發送成功，謝謝使用！");
}
}
finally
{
OBEXCloseStream();
}
}
#region OBEXOpenStream
public bool OBEXOpenStream(string BTMAC)
{
// serial port UUID
Guid spguid = OpenNETCF.Net.Bluetooth.BluetoothService.ObexObjectPush;
OpenNETCF.Net.BluetoothAddress btaddress = OpenNETCF.Net.BluetoothAddress.Parse(BTMAC);
client = new OpenNETCF.Net.Sockets.BluetoothClient();
// define endpoint
OpenNETCF.Net.BluetoothEndPoint endpoint = new OpenNETCF.Net.BluetoothEndPoint(btaddress, spguid);
try
{
//open socket
client.Connect(endpoint);
}
catch
{
//unable to connect (server not listening on spguid)
return false;
}
//connect socket
stream = client.GetStream();
return true;
}
#endregion
#region OBEXCloseStream
private void OBEXCloseStream()
{
if (stream != null)
{
stream.Close();
}
if (client != null)
{
client.Close();
}
}
#endregion
#region OBEXConnect
private bool OBEXConnect()
{
//send client request
byte[] ConnectPacket = new byte[7];
ConnectPacket[0] = 0x80; // Connect
ConnectPacket[1] = 0x00; // Packetlength Hi Byte
ConnectPacket[2] = 0x07; // Packetlength Lo Byte
ConnectPacket[3] = 0x10; // Obex v1
ConnectPacket[4] = 0x00; // no flags
ConnectPacket[5] = 0x20; // 8k max packet size Hi Byte
ConnectPacket[6] = 0x00; // 8k max packet size Lo Byte
stream.Write(ConnectPacket, 0, ConnectPacket.Length);
//listen for server response
byte[] ReceiveBufferA = new byte[3];
stream.Read(ReceiveBufferA, 0, 3);
if (ReceiveBufferA[0] == 160) // 0xa0
{
//success, decode rest of packet
int plength = (0xff * ReceiveBufferA[1]) + ReceiveBufferA[2]; //length of packet is...
//listen for rest of packet
byte[] ReceiveBufferB = new byte[plength - 3];
stream.Read(ReceiveBufferB, 0, plength - 3);
int obver = ReceiveBufferB[0]; //server obex version (16 = v1.0)
int cflags = ReceiveBufferB[1]; //connect flags
int maxpack = (0xff * ReceiveBufferB[2]) + ReceiveBufferB[3]; //max packet size
return true;
}
else
{
return false;
}
}
#endregion
#region OBEXRequest
private int OBEXRequest(string tReqType, string tName, string tType, string tFileContent)
{
//send client request
int i;
int offset;
int packetsize;
byte reqtype = 0x82;
int tTypeLen = 0x03;
int typeheadsize;
int typesizeHi = 0x00;
int typesizeLo = 0x03;
//tName = "contact.vcf";
//tType = "text/x-vCard";
//tFileContent = "BEGIN:VCARD\r\nVERSION:2.1\r\nN:;aardvark\r\nFN:aardvark\r\nEND:VCARD\r\n";
if (tReqType == "GET")
{
reqtype = 0x83; // 131 GET-Final
}
if (tReqType == "PUT")
{
reqtype = 0x82; // 130 PUT-Final
}
packetsize = 3;
//Name Header
int tNameLength = tName.Length;
int nameheadsize = (3 + (tNameLength * 2) + 2);
int namesizeHi = (nameheadsize & 0xff00) / 0xff;
int namesizeLo = nameheadsize & 0x00ff;
packetsize = packetsize + nameheadsize;
if (tType != "")
{
//Type Header
tTypeLen = tType.Length;
typeheadsize = 3 + tTypeLen + 1;
typesizeHi = (typeheadsize & 0xff00) / 0xff;
typesizeLo = typeheadsize & 0x00ff;
packetsize = packetsize + typeheadsize;
}
//Body
int fileLen = System.Text.Encoding.Default.GetBytes(tFileContent).Length;//tFileContent.Length;
int fileheadsize = 3 + fileLen;
int filesizeHi = (fileheadsize & 0xff00) / 0xff; ;
int filesizeLo = fileheadsize & 0x00ff; ;
packetsize = packetsize + fileheadsize;
int packetsizeHi = (packetsize & 0xff00) / 0xff;
int packetsizeLo = packetsize & 0x00ff;
byte[] tSendByte = new byte[packetsize];
//PUT-final Header
tSendByte[0] = reqtype; // Request type e.g. PUT-final 130
tSendByte[1] = Convert.ToByte(packetsizeHi); // Packetlength Hi
tSendByte[2] = Convert.ToByte(packetsizeLo); // Packetlength Lo
offset = 2;
//Name Header
tSendByte[offset + 1] = 0x01; // HI for Name header
tSendByte[offset + 2] = Convert.ToByte(namesizeHi); // Length of Name header (2 bytes per char)
tSendByte[offset + 3] = Convert.ToByte(namesizeLo); // Length of Name header (2 bytes per char)
// Name+\n\n in unicode
byte[] tNameU = System.Text.Encoding.BigEndianUnicode.GetBytes(tName);
tNameU.CopyTo(tSendByte, offset + 4);
offset = offset + 3 + (tNameLength * 2);
tSendByte[offset + 1] = 0x00; // null term
tSendByte[offset + 2] = 0x00; // null term
offset = offset + 2;
if (tType != "")
{
//Type Header
tSendByte[offset + 1] = 0x42; // HI for Type Header 66
tSendByte[offset + 2] = Convert.ToByte(typesizeHi); // Length of Type Header
tSendByte[offset + 3] = Convert.ToByte(typesizeLo); // Length of Type Header
for (i = 0; i <= (tTypeLen - 1); i++)
{
tSendByte[offset + 4 + i] = Convert.ToByte(Convert.ToChar(tType.Substring(i, 1)));
}
tSendByte[offset + 3 + tTypeLen + 1] = 0x00; // null terminator
offset = offset + 3 + tTypeLen + 1;
}
//Body
tSendByte[offset + 1] = 0x49; //HI End of Body 73
tSendByte[offset + 2] = Convert.ToByte(filesizeHi); //
tSendByte[offset + 3] = Convert.ToByte(filesizeLo); //1k payload + 3 for HI header
//for (i = 0; i <= (fileLen - 1); i++)
//{
// tSendByte[offset + 4 + i] = Convert.ToByte(tFileContent.Substring(i, 1));//Convert.ToByte(Convert.ToChar(tFileContent.Substring(i, 1)));
//}
byte[] bfile = System.Text.Encoding.Default.GetBytes(tFileContent);
for (i = 0; i <= bfile.Length - 1; i++)
{
tSendByte[offset + 4 + i] = bfile[i];
}
//tSendByte[offset+4+fileLen] = 0x00; // null terminator
offset = offset + 3 + fileLen;
stream.Write(tSendByte, 0, tSendByte.Length);
//listen for server response
//TODO: can hang here forever waiting response...
bool x = stream.DataAvailable; // changed bluetoothclient - public NetworkStream GetStream()
byte[] tArray4 = new byte[3];
stream.Read(tArray4, 0, 3);
x = stream.DataAvailable;
if (tArray4[0] == 160) // 0xa0
{
int plength = (tArray4[1] * 256) + tArray4[2] - 3;
byte[] tArray5 = new byte[plength];
if (plength > 0)
{
stream.Read(tArray5, 0, plength);
//TODO: data in returned packet to deal with
}
return 160;
}
if (tArray4[0] == 197) // 0xc5 Method not allowed
{
return 197;
}
if (tArray4[0] == 192) // 0xc0 Bad Request
{
return 192;
}
return 0;
}
#endregion
}
以上就是如何用C#在PC上查找連接藍牙設備并實現數據傳輸?shù)脑敿?xì)內容，更多關于c# 藍牙傳輸?shù)馁Y料請關注腳本之家其它相關文章！
您可能感興趣的文章:
相關文章
這篇文章主要介紹了Qt程序中調用C#編寫的dll,本文圖文并茂給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-04-04
C#實現簡單獲取及設置Session類
這篇文章主要介紹了C#實現簡單獲取及設置Session類,涉及C#針對session的設置及獲取的技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-03-03
C#中實現插入、刪除Excel分頁符的方法
這篇文章主要給大家介紹了關于在C#中實現插入、刪除Excel分頁符的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2018-05-05
這篇文章主要介紹了c#強制類型轉換int方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-07-07
這篇文章主要介紹了C#中this的使用方法,this是C#程序設計中非常重要的一個關鍵字,本文以實例形式對此作出簡單的用法分析,需要的朋友可以參考下2014-08-08
這篇文章介紹了C#實現協變和逆變的案例，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-10-10
c#數據庫與TXT導入導出的實例
最近剛學完ADO.NET,做了個數據導入導出的題目，是將txt中的數據導入數據庫，然后將數據庫中的數據導出到txt中，這里說的數據的格式是“tom|23”，tom指名字，23指年齡。廢話也不多說了，大家直接看代碼。2013-04-04
今天小編就為大家分享一篇關于C#中List和SortedList的簡介，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2018-10-10
C#窗口實現定時關機系統
這篇文章主要為大家詳細介紹了C#窗口實現定時關機系統，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-07-07
C#中的數組作為參數傳遞所引發的問題
這篇文章主要介紹了C#中的數組作為參數傳遞所引發的問題 的相關資料,需要的朋友可以參考下2016-03-03