最新国产好看的视频,伊人天堂AV在线,国产Aaaaaa视频,蜜臀视频在线观看一区,人妻av色图,密臀久久久精品影片,青青视频免费观看毛片,久草在线观看视,国产三级精品色情在线

python實現馬丁策略的實例詳解

 更新時間:2021年01月15日 15:22:15   作者:達科索斯  
這篇文章主要介紹了python實現馬丁策略的實例詳解,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下

馬丁策略本來是一種賭博方法,但在投資界應用也很廣泛,不過對于投資者來說馬丁策略過于簡單,所以本文將其改進并使得其在震蕩市中獲利,以下說明如何實現馬丁策略。

策略

逢跌加倉,間隔由自己決定,每次加倉是當前倉位的一倍。
連續跌兩次賣出,且賣出一半倉位。
如果爆倉則全倉賣出止損。
初始持倉設置為10%~25%,則可進行2到3次補倉。

初始化馬丁策略類屬性

def __init__(self,startcash, start, end):
 self.cash = startcash #初始化現金
 self.hold = 0 #初始化持倉金額
 self.holdper = self.hold /startcash #初始化倉位
 self.log = [] #初始化日志
 self.cost = 0 #成本價 
 self.stock_num = 0 #股票數量
 self.starttime = start #起始時間
 self.endtime = end #終止時間
 self.quantlog = [] #交易量記錄
 self.earn = [] #總資產記錄
 self.num_log = []
 self.droplog = [0]

為了記錄每次買賣倉位的變化初始化了各種列表。

交易函數

首先導入需要的模塊

import pandas as pd 
import numpy as np
import tushare as ts 
import matplotlib.pyplot as plt
 def buy(self, currentprice, count):

 self.cash -= currentprice*count
 self.log.append('buy')
 self.hold += currentprice*count
 self.holdper = self.hold / (self.cash+ self.hold) 
 self.stock_num += count
 self.cost = self.hold / self.stock_num
 self.quantlog.append(count//100)
 print('買入價:%.2f,手?jǐn)?shù):%d,現在成本價:%.2f,現在持倉:%.2f,現在籌碼:%d' %(currentprice ,count//100, self.cost, self.holdper, self.stock_num//100))
 self.earn.append(self.cash+ currentprice*self.stock_num)
 self.num_log.append(self.stock_num)
 self.droplog = [0]
 
 def sell(self, currentprice, count):
 self.cash += currentprice*count
 self.stock_num -= count
 self.log.append('sell')
 self.hold = self.stock_num*self.cost
 self.holdper = self.hold / (self.cash + self.hold)
 #self.cost = self.hold / self.stock_num
 print('賣出價:%.2f,手?jǐn)?shù):%d,現在成本價:%.2f,現在持倉:%.2f,現在籌碼:%d' %(currentprice ,count//100, self.cost, self.holdper, self.stock_num//100))
 self.quantlog.append(count//100)    
 self.earn.append(self.cash+ currentprice*self.stock_num)
 self.num_log.append(self.stock_num)
 
 def holdstock(self,currentprice):
 self.log.append('hold')
 #print('持有,現在倉位為:%.2f?,F(xiàn)在成本:%.2f' %(self.holdper,self.cost))
 self.quantlog.append(0)
 self.earn.append(self.cash+ currentprice*self.stock_num)
 self.num_log.append(self.stock_num)

持倉成本的計算方式是利用總持倉金額除以總手?jǐn)?shù),賣出時不改變持倉成本。持有則是不做任何操作只記錄日志

數據接口

def get_stock(self, code):
 df=ts.get_k_data(code,autype='qfq',start= self.starttime ,end= self.endtime)
 df.index=pd.to_datetime(df.date)
 df=df[['open','high','low','close','volume']]
 return df

數據接口使用tushare,也可使用pro接口,到官網注冊領取token。

token = '輸入你的token'
pro = ts.pro_api()
ts.set_token(token)
 def get_stock_pro(self, code):
 code = code + '.SH'
 df = pro.daily(ts_code= code, start_date = self.starttime, end_date= self.endtime)
 return df

數據結構:

在這里插入圖片描述

回測函數

 def startback(self, data, everyChange, accDropday):
 """
 回測函數
 """
 for i in range(len(data)):
  if i < 1:
  continue
  if i < accDropday:
  drop = backtesting.accumulateVar(everyChange, i, i)
  #print('現在累計漲跌幅度為:%.2f'%(drop))
  self.martin(data[i], data[i-1], drop, everyChange,i)
  elif i < len(data)-2:
  drop = backtesting.accumulateVar(everyChange, i, accDropday)
  #print('現在累計漲跌幅度為:%.2f'%(drop))
  self.martin(data[i],data[i-1], drop, everyChange,i)
  else:
  if self.stock_num > 0:
   self.sell(data[-1],self.stock_num)
  else: self.holdstock(data[i])

因?yàn)橐?jì)算每日漲跌幅,要計算差分,所以第一天的數據不能計算在for循環中跳過,accDropday是累計跌幅的最大計算天數,用來控制入場,當累計跌幅大于某個數值且倉位為0%時可再次入場。以下是入場函數:

def enter(self, currentprice,ex_price,accuDrop):
 if accuDrop < -0.01:#and ex_price > currentprice:
  count = (self.cash+self.hold) *0.24 // currentprice //100 * 100
  print('再次入場')
  self.buy(currentprice, count)
 else: self.holdstock(currentprice)

入場倉位選擇0.24則可進行兩次抄底,如果抄底間隔為7%可承受最大跌幅為14%。

策略函數

 def martin(self, currentprice, ex_price, accuDrop,everyChange,i):
 diff = (ex_price - currentprice)/ex_price
 self.droplog.append(diff)

 if sum(self.droplog) <= 0:
  self.droplog = [0]
 
 if self.stock_num//100 > 1:
  if sum(self.droplog) >= 0.04:
  if self.holdper*2 < 0.24:
   count =(self.cash+self.hold) *(0.25-self.holdper) // currentprice //100 * 100
   self.buy(currentprice, count)
  elif self.holdper*2 < 1 and (self.hold/currentprice)//100 *100 > 0 and backtesting.computeCon(self.log) < 5:
   self.buy(currentprice, (self.hold/currentprice)//100 *100)
   
  else: self.sell(currentprice, self.stock_num//100 *100);print('及時止損')

  elif (everyChange[i-2] < 0 and everyChange[i-1] <0 and self.cost < currentprice):# or (everyChange[i-1] < -0.04 and self.cost < currentprice):
   
  if (self.stock_num > 0) and ((self.stock_num*(1/2)//100*100) > 0):
   
   self.sell(currentprice, self.stock_num*(1/2)//100*100 )

   #print("現在累計漲跌幅為: %.3f" %(accuDrop))
  elif self.stock_num == 100: self.sell(currentprice, 100)
  else: self.holdstock(currentprice)
  else: self.holdstock(currentprice)
 else: self.enter(currentprice,ex_price,accuDrop)

首先構建了droplog專門用于計算累計漲跌幅,當其大于0時重置為0,每次購買后也將其重置為0。當?shù)笥?.04則買入,一下為流程圖(因?yàn)樽鲌D軟件Visustin為試用版所以有水印,兩個圖可以結合來看):

在這里插入圖片描述
在這里插入圖片描述

此策略函數可以改成其他策略甚至是反馬丁,因?yàn)榻灰缀瘮?shù)可以通用。

作圖和輸出結果

buylog = pd.Series(broker.log)
close = data.copy()
buy = np.zeros(len(close))
sell = np.zeros(len(close))
for i in range(len(buylog)):
 if buylog[i] == 'buy':
 buy[i] = close[i]
 elif buylog[i] == 'sell':
 sell[i] = close[i]

buy = pd.Series(buy)
sell = pd.Series(sell)
buy.index = close.index
sell.index = close.index
quantlog = pd.Series(broker.quantlog)
quantlog.index = close.index
earn = pd.Series(broker.earn)
earn.index = close.index

buy = buy.loc[buy > 0]
sell = sell.loc[sell>0]
plt.plot(close)
plt.scatter(buy.index,buy,label = 'buy')
plt.scatter(sell.index,sell, label = 'sell')
plt.title('馬丁策略')
plt.legend()

#畫圖
plt.rcParams['font.sans-serif'] = ['SimHei']

fig, (ax1, ax2, ax3) = plt.subplots(3,figsize=(15,8))

ax1.plot(close)
ax1.scatter(buy.index,buy,label = 'buy',color = 'red')
ax1.scatter(sell.index,sell, label = 'sell',color = 'green')
ax1.set_ylabel('Price')
ax1.grid(True)
ax1.legend()

ax1.xaxis_date()
ax2.bar(quantlog.index, quantlog, width = 5)
ax2.set_ylabel('Volume')

ax2.xaxis_date()
ax2.grid(True)
ax3.xaxis_date()
ax3.plot(earn)
ax3.set_ylabel('總資產包括浮盈')
plt.show()

馬丁策略回測(中通客車)

在這里插入圖片描述

交易日志

到此這篇關于python實現馬丁策略的實例詳解的文章就介紹到這了,更多相關python馬丁策略內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • Python的多種對象工廠模式方便代碼維護擴展

    Python的多種對象工廠模式方便代碼維護擴展

    這篇文章主要為大家介紹了Python的多種對象工廠模式更方便我們進行代碼維護擴展,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪
    2024-01-01
  • Odoo中如何生成唯一不重復的序列號詳解

    Odoo中如何生成唯一不重復的序列號詳解

    這篇文章主要給大家介紹了關于Odoo中如何生成唯一不重復的序列號的相關資料,文中通過示例代碼介紹的非常詳細,對大家的學習或工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧。
    2018-02-02
  • python uuid模塊使用實例

    python uuid模塊使用實例

    這篇文章主要介紹了python uuid模塊使用實例,本文給出簡單使用示例,講解uuid1、uuid3、 uuid4、 uuid5這幾個方法,需要的朋友可以參考下
    2015-04-04
  • python使用watchdog實現文件資源監控

    python使用watchdog實現文件資源監控

    watchdog 支持跨平臺文件資源監控,可以檢測指定文件夾下文件及文件夾變動,下面我們來看看Python如何使用watchdog實現文件資源監控吧
    2025-01-01
  • python-docx的簡單使用示例教程

    python-docx的簡單使用示例教程

    這篇文章主要介紹了python-docx的簡單使用,本文通過示例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2023-05-05
  • Python lxml模塊安裝教程

    Python lxml模塊安裝教程

    這篇文章主要介紹了Python lxml模塊安裝教程,本文分別講解了Windows系統和Linux系統下的安裝教程,需要的朋友可以參考下
    2015-06-06
  • Python根據字典值對字典進行排序的三種方法實例

    Python根據字典值對字典進行排序的三種方法實例

    Python中的字典是無序類型,沒有自己的排序方法,下面這篇文章主要給大家介紹了關于Python根據字典值對字典進行排序的三種方法,文中通過實例代碼介紹的非常詳細,需要的朋友可以參考下
    2022-09-09
  • python中np.where的用法

    python中np.where的用法

    np.where() 是 NumPy 庫中的一個函數,用于根據條件從多個選擇中選擇元素,本文主要介紹了python中np.where的用法,具有一定的參考價值,感興趣的可以了解一下
    2023-10-10
  • Python打印九九乘法表的5種方式代碼示例

    Python打印九九乘法表的5種方式代碼示例

    在Python中打印99乘法表的方法有很多種,比如for-for、while-while、while-for等,這篇文章主要給大家介紹了關于Python打印九九乘法表的5種方式,文中通過代碼介紹的非常詳細,需要的朋友可以參考下
    2024-04-04
  • Python中移除List重復項的五種方法

    Python中移除List重復項的五種方法

    本文列些處幾種去除在Python 列表中(list)可能存在的重復項,這在很多應用程序中都會遇到的需求,本文介紹幾種方法,感興趣的可以了解一下
    2021-05-05

最新評論

厦门市| 曲靖市| 安泽县| 都兰县| 马尔康县| 内乡县| 台北市| 通许县| 北海市| 二手房| 泰安市| 瑞安市| 金川县| 公安县| 合川市| 伊吾县| 马边| 嵩明县| 乌审旗| 永宁县| 泌阳县| 新龙县| 云霄县| 唐山市| 长治市| 宜君县| 洛隆县| 嘉兴市| 蓬安县| 辽阳县| 苏尼特左旗| 于都县| 珲春市| 浑源县| 恩平市| 曲周县| 日喀则市| 光山县| 盱眙县| 深泽县| 仙游县|