快捷導航

Android用AudioRecord進行錄音

更新時間：2020年12月23日 08:59:12 作者：原心木

這篇文章主要介紹了Android用AudioRecord進行錄音的方法，幫助大家更好的理解和使用Android，感興趣的朋友可以了解下

在音視頻開發中，錄音當然是必不可少的。首先我們要學會單獨的錄音功能，當然這里說的錄音是指用AudioRecord來錄音，讀取錄音原始數據，讀到的就是所謂的PCM數據。對于錄音來說，最重要的幾個參數要搞明白：

1、simpleRate采樣率，采樣率就是采樣頻率，每秒鐘記錄多少個樣本。

2、channelConfig通道配置，其實就是所謂的單通道，雙通道之類的，AudioFormat.CHANNEL_IN_MONO單通道，AudioFormat.CHANNEL_IN_STEREO雙通道，這里只列了這兩種，還有其它的，可自行查閱。

3、audioFormat音頻格式，其實就是采樣的精度，每個樣本的位數，AudioFormat.ENCODING_PCM_8BIT每個樣本占8位，AudioFormat.ENCODING_PCM_16BIT每個樣本占16位，這里也只用了這兩個，別的沒研究。

在學習過程中會用到的一些參數，我這里封裝了一個類，如下

public class AudioParams {

  enum Format {
    SINGLE_8_BIT, DOUBLE_8_BIT, SINGLE_16_BIT, DOUBLE_16_BIT
  }

  private Format format;
  int simpleRate;

  AudioParams(int simpleRate, Format f) {
    this.simpleRate = simpleRate;
    this.format = f;
  }

  AudioParams(int simpleRate, int channelCount, int bits) {
    this.simpleRate = simpleRate;
    set(channelCount, bits);
  }

  int getBits() {
    return (format == Format.SINGLE_8_BIT || format == Format.DOUBLE_8_BIT) ? 8 : 16;
  }

  int getEncodingFormat() {
    return (format == Format.SINGLE_8_BIT || format == Format.DOUBLE_8_BIT) ? AudioFormat.ENCODING_PCM_8BIT :
      AudioFormat.ENCODING_PCM_16BIT;
  }

  int getChannelCount() {return (format == Format.SINGLE_8_BIT || format == Format.SINGLE_16_BIT) ? 1 : 2;}

  int getChannelConfig() {
    return (format == Format.SINGLE_8_BIT || format == Format.SINGLE_16_BIT) ? AudioFormat.CHANNEL_IN_MONO :
      AudioFormat.CHANNEL_IN_STEREO;
  }

  int getOutChannelConfig() {
    return (format == Format.SINGLE_8_BIT || format == Format.SINGLE_16_BIT) ? AudioFormat.CHANNEL_OUT_MONO :
      AudioFormat.CHANNEL_OUT_STEREO;
  }

  void set(int channelCount, int bits) {
    if ((channelCount != 1 && channelCount != 2) || (bits != 8 && bits != 16)) {
      throw new IllegalArgumentException("不支持其它格式 channelCount=$channelCount bits=$bits");
    }
    if (channelCount == 1) {
      if (bits == 8) {
        format = Format.SINGLE_8_BIT;
      } else {
        format = Format.SINGLE_16_BIT;
      }
    } else {
      if (bits == 8) {
        format = Format.DOUBLE_8_BIT;
      } else {
        format = Format.DOUBLE_16_BIT;
      }
    }
  }
}

這里固定使用了單通道8位，雙通道8位，單通道16位，雙通道16位，所以用了枚舉來限制。

為了方便把錄音數據拿出來顯示、存儲，這里寫了一個回調方法如下

public interface RecordCallback {
    /**
     * 數據回調
     *
     * @param bytes 數據
     * @param len  數據有效長度，-1時表示數據結束
     */
    void onRecord(byte[] bytes, int len);
  }

有了這些參數，現在就可以錄音了，先看一下樣例

public void startRecord(AudioParams params, RecordCallback callback) {
    int simpleRate = params.simpleRate;
    int channelConfig = params.getChannelConfig();
    int audioFormat = params.getEncodingFormat();
    // 根據AudioRecord提供的api拿到最小緩存大小
    int bufferSize = AudioRecord.getMinBufferSize(simpleRate, channelConfig, audioFormat);
    //創建Record對象
    record = new AudioRecord(MediaRecorder.AudioSource.MIC, simpleRate, channelConfig, audioFormat, bufferSize);
    recordThread = new Thread(() -> {
      byte[] buffer = new byte[bufferSize];
      record.startRecording();
      recording = true;
      while (recording) {
        int read = record.read(buffer, 0, bufferSize);
        // 將數據回調到外部
        if (read > 0 && callback != null) {
          callback.onRecord(buffer, read);
        }
      }
      if (callback != null) {
        // len 為-1時表示結束
        callback.onRecord(buffer, -1);
        recording = false;
      }
      //釋放資源
      release();
    });
    recordThread.start();
  }

這個方法就是簡單的采集音頻數據，這個數據就是最原始的pcm數據。

拿到pcm數據以后，如果直接保存到文件是無法直接播放的，因?yàn)檫@只是一堆數據，沒有任何格式說明，如果想讓普通播放器可以播放，需要在文件中加入文件頭，來告訴播放器這個數據的格式，這里是直接保存成wav格式的數據。下面就是加入wav格式文件頭的方法

private static byte[] getWaveFileHeader(int totalDataLen, int sampleRate, int channelCount, int bits) {
    byte[] header = new byte[44];
    // RIFF/WAVE header
    header[0] = 'R';
    header[1] = 'I';
    header[2] = 'F';
    header[3] = 'F';

    int fileLength = totalDataLen + 36;
    header[4] = (byte) (fileLength & 0xff);
    header[5] = (byte) (fileLength >> 8 & 0xff);
    header[6] = (byte) (fileLength >> 16 & 0xff);
    header[7] = (byte) (fileLength >> 24 & 0xff);
    //WAVE
    header[8] = 'W';
    header[9] = 'A';
    header[10] = 'V';
    header[11] = 'E';
    // 'fmt ' chunk
    header[12] = 'f';
    header[13] = 'm';
    header[14] = 't';
    header[15] = ' ';
    // 4 bytes: size of 'fmt ' chunk
    header[16] = 16;
    header[17] = 0;
    header[18] = 0;
    header[19] = 0;

    // pcm format = 1
    header[20] = 1;
    header[21] = 0;
    header[22] = (byte) channelCount;
    header[23] = 0;

    header[24] = (byte) (sampleRate & 0xff);
    header[25] = (byte) (sampleRate >> 8 & 0xff);
    header[26] = (byte) (sampleRate >> 16 & 0xff);
    header[27] = (byte) (sampleRate >> 24 & 0xff);

    int byteRate = sampleRate * bits * channelCount / 8;
    header[28] = (byte) (byteRate & 0xff);
    header[29] = (byte) (byteRate >> 8 & 0xff);
    header[30] = (byte) (byteRate >> 16 & 0xff);
    header[31] = (byte) (byteRate >> 24 & 0xff);
    // block align
    header[32] = (byte) (channelCount * bits / 8);
    header[33] = 0;
    // bits per sample
    header[34] = (byte) bits;
    header[35] = 0;
    //data
    header[36] = 'd';
    header[37] = 'a';
    header[38] = 't';
    header[39] = 'a';
    header[40] = (byte) (totalDataLen & 0xff);
    header[41] = (byte) (totalDataLen >> 8 & 0xff);
    header[42] = (byte) (totalDataLen >> 16 & 0xff);
    header[43] = (byte) (totalDataLen >> 24 & 0xff);
    return header;
  }

根據幾個參數設置一下文件頭，然后直接寫入錄音采集到的pcm數據，就可被正常播放了。wav文件頭格式定義，可點擊這里查看或自行百度。

如果想要通過AudioRecord錄音直接保存到文件，可參考下面方法

public void startRecord(String filePath, AudioParams params, RecordCallback callback) {
    int channelCount = params.getChannelCount();
    int bits = params.getBits();

    final boolean storeFile = filePath != null && !filePath.isEmpty();

    startRecord(params, (bytes, len) -> {
      if (storeFile) {
        if (file == null) {
          File f = new File(filePath);
          if (f.exists()) {
            f.delete();
          }
          try {
            file = new RandomAccessFile(f, "rw");
            file.write(getWaveFileHeader(0, params.simpleRate, channelCount, bits));
          } catch (IOException e) {
            e.printStackTrace();
          }
        }
        if (len > 0) {
          try {
            file.write(bytes, 0, len);
          } catch (IOException e) {
            e.printStackTrace();
          }
        } else {
          try {
            // 因?yàn)樵谇懊嬉呀?jīng)寫入頭信息，所以這里要減去頭信息才是數據的長度
            int length = (int) file.length() - 44;
            file.seek(0);
            file.write(getWaveFileHeader(length, params.simpleRate, channelCount, bits));
            file.close();
          } catch (IOException e) {
            e.printStackTrace();
          }
        }
      }
      if (callback != null) {
        callback.onRecord(bytes, len);
      }
    });
  }

先通過RandomAccessFile創建文件，先寫入文件頭，由于暫時我們不知道會錄多長，有多少pcm數據，長度先用0表示，等錄音結束后，通過seek(int)方法重新寫入文件頭信息，也可以先把pcm數據保存到臨時文件，然后再寫入到一個新的文件中，這里就不舉例說明了。

最后放入完整類的代碼

package cn.sskbskdrin.record.audio;

import android.media.AudioRecord;
import android.media.MediaRecorder;

import java.io.File;
import java.io.IOException;
import java.io.RandomAccessFile;

/**
 * @author sskbskdrin
 * @date 2019/April/3
 */
public class AudioRecordManager {

  private AudioParams DEFAULT_FORMAT = new AudioParams(8000, 1, 16);

  private AudioRecord record;

  private Thread recordThread;

  private boolean recording = false;

  private RandomAccessFile file;

  public void startRecord(String filePath, RecordCallback callback) {
    startRecord(filePath, DEFAULT_FORMAT, callback);
  }

  public void startRecord(String filePath, AudioParams params, RecordCallback callback) {
    int channelCount = params.getChannelCount();
    int bits = params.getBits();

    final boolean storeFile = filePath != null && !filePath.isEmpty();

    startRecord(params, (bytes, len) -> {
      if (storeFile) {
        if (file == null) {
          File f = new File(filePath);
          if (f.exists()) {
            f.delete();
          }
          try {
            file = new RandomAccessFile(f, "rw");
            file.write(getWaveFileHeader(0, params.simpleRate, channelCount, bits));
          } catch (IOException e) {
            e.printStackTrace();
          }
        }
        if (len > 0) {
          try {
            file.write(bytes, 0, len);
          } catch (IOException e) {
            e.printStackTrace();
          }
        } else {
          try {
            // 因?yàn)樵谇懊嬉呀?jīng)寫入頭信息，所以這里要減去頭信息才是數據的長度
            int length = (int) file.length() - 44;
            file.seek(0);
            file.write(getWaveFileHeader(length, params.simpleRate, channelCount, bits));
            file.close();
          } catch (IOException e) {
            e.printStackTrace();
          }
        }
      }
      if (callback != null) {
        callback.onRecord(bytes, len);
      }
    });
  }

  public void startRecord(AudioParams params, RecordCallback callback) {
    int simpleRate = params.simpleRate;
    int channelConfig = params.getChannelConfig();
    int audioFormat = params.getEncodingFormat();
    // 根據AudioRecord提供的api拿到最小緩存大小
    int bufferSize = AudioRecord.getMinBufferSize(simpleRate, channelConfig, audioFormat);
    //創建Record對象
    record = new AudioRecord(MediaRecorder.AudioSource.MIC, simpleRate, channelConfig, audioFormat, bufferSize);
    recordThread = new Thread(() -> {
      byte[] buffer = new byte[bufferSize];
      record.startRecording();
      recording = true;
      while (recording) {
        int read = record.read(buffer, 0, bufferSize);
        // 將數據回調到外部
        if (read > 0 && callback != null) {
          callback.onRecord(buffer, read);
        }
      }
      if (callback != null) {
        // len 為-1時表示結束
        callback.onRecord(buffer, -1);
        recording = false;
      }
      //釋放資源
      release();
    });
    recordThread.start();
  }

  public void stop() {
    recording = false;
  }

  public void release() {
    recording = false;
    if (record != null) {
      record.stop();
      record.release();
    }
    record = null;
    file = null;
    recordThread = null;
  }

  private static byte[] getWaveFileHeader(int totalDataLen, int sampleRate, int channelCount, int bits) {
    byte[] header = new byte[44];
    // RIFF/WAVE header
    header[0] = 'R';
    header[1] = 'I';
    header[2] = 'F';
    header[3] = 'F';

    int fileLength = totalDataLen + 36;
    header[4] = (byte) (fileLength & 0xff);
    header[5] = (byte) (fileLength >> 8 & 0xff);
    header[6] = (byte) (fileLength >> 16 & 0xff);
    header[7] = (byte) (fileLength >> 24 & 0xff);
    //WAVE
    header[8] = 'W';
    header[9] = 'A';
    header[10] = 'V';
    header[11] = 'E';
    // 'fmt ' chunk
    header[12] = 'f';
    header[13] = 'm';
    header[14] = 't';
    header[15] = ' ';
    // 4 bytes: size of 'fmt ' chunk
    header[16] = 16;
    header[17] = 0;
    header[18] = 0;
    header[19] = 0;

    // pcm format = 1
    header[20] = 1;
    header[21] = 0;
    header[22] = (byte) channelCount;
    header[23] = 0;

    header[24] = (byte) (sampleRate & 0xff);
    header[25] = (byte) (sampleRate >> 8 & 0xff);
    header[26] = (byte) (sampleRate >> 16 & 0xff);
    header[27] = (byte) (sampleRate >> 24 & 0xff);

    int byteRate = sampleRate * bits * channelCount / 8;
    header[28] = (byte) (byteRate & 0xff);
    header[29] = (byte) (byteRate >> 8 & 0xff);
    header[30] = (byte) (byteRate >> 16 & 0xff);
    header[31] = (byte) (byteRate >> 24 & 0xff);
    // block align
    header[32] = (byte) (channelCount * bits / 8);
    header[33] = 0;
    // bits per sample
    header[34] = (byte) bits;
    header[35] = 0;
    //data
    header[36] = 'd';
    header[37] = 'a';
    header[38] = 't';
    header[39] = 'a';
    header[40] = (byte) (totalDataLen & 0xff);
    header[41] = (byte) (totalDataLen >> 8 & 0xff);
    header[42] = (byte) (totalDataLen >> 16 & 0xff);
    header[43] = (byte) (totalDataLen >> 24 & 0xff);
    return header;
  }

  public interface RecordCallback {
    /**
     * 數據回調
     *
     * @param bytes 數據
     * @param len  數據有效長度，-1時表示數據結束
     */
    void onRecord(byte[] bytes, int len);
  }
}

如有不對之處還請評論指正

以上就是Android用AudioRecord進行錄音的詳細內容，更多關于Android AudioRecord的資料請關注腳本之家其它相關文章！

您可能感興趣的文章: