Linux ssh服務器配置代碼實例
更新時間：2020年09月11日 11:53:01 作者：陌鉎こ城sHi
這篇文章主要介紹了Linux ssh服務器配置代碼實例,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
使用如下終端命令可以在 Linux 主機中安裝 ssh服務器sudo apt-get install openssh-server
lin@lin-machine:~$ sudo apt-get install openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libck-connector0 ncurses-term openssh-client openssh-sftp-server ssh-import-id Suggested packages: libpam-ssh keychain monkeysphere rssh molly-guard The following NEW packages will be installed: libck-connector0 ncurses-term openssh-server openssh-sftp-server ssh-import-id The following packages will be upgraded: openssh-client 1 upgraded, 5 newly installed, 0 to remove and 438 not upgraded. Need to get 1,180 kB of archives. After this operation, 3,429 kB of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libck-connector0 amd64 0.4.5-3.1ubuntu2 [10.5 kB] Get:2 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-client amd64 1:6.6p1-2ubuntu2.11 [564 kB] Get:3 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ncurses-term all 5.9+20140118-1ubuntu1 [243 kB] Get:4 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-sftp-server amd64 1:6.6p1-2ubuntu2.11 [34.1 kB] Get:5 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-server amd64 1:6.6p1-2ubuntu2.11 [318 kB] Get:6 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ssh-import-id all 3.21-0ubuntu1 [9,624 B] Fetched 1,180 kB in 22s (51.6 kB/s) Preconfiguring packages ... Selecting previously unselected package libck-connector0:amd64. (Reading database ... 168838 files and directories currently installed.) Preparing to unpack .../libck-connector0_0.4.5-3.1ubuntu2_amd64.deb ... Unpacking libck-connector0:amd64 (0.4.5-3.1ubuntu2) ... Preparing to unpack .../openssh-client_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-client (1:6.6p1-2ubuntu2.11) over (1:6.6p1-2ubuntu2.7) ... Selecting previously unselected package ncurses-term. Preparing to unpack .../ncurses-term_5.9+20140118-1ubuntu1_all.deb ... Unpacking ncurses-term (5.9+20140118-1ubuntu1) ... Selecting previously unselected package openssh-sftp-server. Preparing to unpack .../openssh-sftp-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-sftp-server (1:6.6p1-2ubuntu2.11) ... Selecting previously unselected package openssh-server. Preparing to unpack .../openssh-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-server (1:6.6p1-2ubuntu2.11) ... Selecting previously unselected package ssh-import-id. Preparing to unpack .../ssh-import-id_3.21-0ubuntu1_all.deb ... Unpacking ssh-import-id (3.21-0ubuntu1) ... Processing triggers for man-db (2.6.7.1-1ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... ureadahead will be reprofiled on next reboot Processing triggers for ufw (0.34~rc-0ubuntu2) ... Setting up libck-connector0:amd64 (0.4.5-3.1ubuntu2) ... Setting up openssh-client (1:6.6p1-2ubuntu2.11) ... Setting up ncurses-term (5.9+20140118-1ubuntu1) ... Setting up openssh-sftp-server (1:6.6p1-2ubuntu2.11) ... Setting up openssh-server (1:6.6p1-2ubuntu2.11) ... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... ssh start/running, process 17527 Setting up ssh-import-id (3.21-0ubuntu1) ... Processing triggers for libc-bin (2.19-0ubuntu6.9) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for ufw (0.34~rc-0ubuntu2) ...
查看當前的虛擬機的ip地址
lin@lin-machine:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:f1:a1:37
inet addr:192.168.147.136 Bcast:192.168.147.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fef1:a137/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3950 errors:0 dropped:0 overruns:0 frame:0
TX packets:514 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1453734 (1.4 MB) TX bytes:63371 (63.3 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:180 errors:0 dropped:0 overruns:0 frame:0
TX packets:180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:13377 (13.3 KB) TX bytes:13377 (13.3 KB)
在PC上查看ip地址
Microsoft Windows [版本 6.1.7601] 版權所有 (c) 2009 Microsoft Corporation。保留所有權利。 E:\Users\libra>ipconfig Windows IP 配置 ... 以太網適配器 VMware Network Adapter VMnet8: 連接特定的 DNS 后綴 . . . . . . . : 本地鏈接 IPv6 地址. . . . . . . . : fe80::9074:b9f5:ddaf:9082%25 IPv4 地址 . . . . . . . . . . . . : 192.168.147.1 子網掩碼 . . . . . . . . . . . . : 255.255.255.0 默認網關. . . . . . . . . . . . . : ... E:\Users\libra>
【備注】pc和linux虛擬機在同個網段的
測試他們是否可以ping
lin@lin-machine:~$ ping 192.168.147.1 PING 192.168.147.1 (192.168.147.1) 56(84) bytes of data. 64 bytes from 192.168.147.1: icmp_seq=1 ttl=64 time=0.586 ms 64 bytes from 192.168.147.1: icmp_seq=2 ttl=64 time=0.442 ms 64 bytes from 192.168.147.1: icmp_seq=3 ttl=64 time=0.435 ms ^C --- 192.168.147.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.435/0.487/0.586/0.074 ms
【可能存在一些異常的原因】注意： Windows 7 默認打開了系統防火墻，是禁ping的，如果在Linux下ping Windows
7，需要先關閉Windows 7 的防火墻。
沒有問題后我們在SecureCRT上開始測試
【備注】根據自己的情況來寫IP和主機名
來測試一下
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
這篇文章主要介紹了Linux之UDP協議及其編程全流程，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2023-03-03
下面小編就為大家?guī)硪黄P(guān)于Linux下對于makefile的理解。小編覺得挺不錯的，現在就分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2017-01-01
這篇文章主要給大家介紹了關于Linux中有效地管理進程的8個命令，文中通過示例代碼介紹的非常詳細，對大家學習或者使用linux具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2018-09-09
本篇文章主要介紹了CentOS SSH無密碼登錄的配置，避免了繁瑣的密碼驗證，有需要的朋友可以了解一下。2016-10-10
這篇文章主要介紹了GTK treeview原理及使用方法解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-09-09
Centos8（最小化安裝）全新安裝Python3.8+pip的方法教程
這篇文章主要介紹了Centos8（最小化安裝）全新安裝Python3.8+pip的方法教程，本文給大家整理了一份命令,需要的朋友可以參考下2020-02-02
主要講述在windows下apache配置SSL以實現http轉換為https2010-06-06
這篇文章主要介紹了ab網站壓力測試命令,需要的朋友可以參考下2016-05-05
windows server2008下搭建PHP運行環境，用IIS+PHP或者phpstudy,或wamp。今天試了試，在linux下搭建php運行環境。感覺還不錯。2018-06-06
這篇文章主要介紹了Linux中scp命令的使用,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2023-12-12