iOS實現九宮格連線手勢解鎖
更新時間:2020年04月18日 15:53:12 作者:LayneCheung
這篇文章主要為大家詳細介紹了iOS實現九宮格連線手勢解鎖,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
本文實例為大家分享了iOS實現九宮格連線手勢解鎖的具體代碼,供大家參考,具體內容如下
Demo下載地址:手勢解鎖
效果圖:

核心代碼:
//
// ClockView.m
// 手勢解鎖
//
// Created by llkj on 2017/8/24.
// Copyright © 2017年 LayneCheung. All rights reserved.
//
#import "ClockView.h"
@interface ClockView ()
//存放當前選中的按鈕
@property (nonatomic, strong) NSMutableArray *selectBtnArry;
//當前手指所在點
@property (nonatomic, assign) CGPoint curP;
@end
@implementation ClockView
- (void)awakeFromNib{
[super awakeFromNib];
//初始化
[self setUp];
}
- (NSMutableArray *)selectBtnArry{
if (_selectBtnArry == nil) {
_selectBtnArry = [NSMutableArray array];
}
return _selectBtnArry;
}
- (void)setUp{
for (int i = 0; i < 9; i ++) {
//創建按鈕
UIButton *btn = [UIButton buttonWithType:UIButtonTypeCustom];
btn.tag = i;
btn.userInteractionEnabled = NO;
[btn setImage:[UIImage imageNamed:@"gesture_node_normal"] forState:UIControlStateNormal];
[btn setImage:[UIImage imageNamed:@"gesture_node_selected"] forState:UIControlStateSelected];
[self addSubview:btn];
}
}
//獲取當前點
- (CGPoint)getCurrentPoint:(NSSet *)point{
UITouch *touch = [point anyObject];
return [touch locationInView:self];
}
//返回按鈕
- (UIButton *)btnRectContainsPoint:(CGPoint)point{
//遍歷brn判斷當前點在不在btn上
for (UIButton *btn in self.subviews) {
if (CGRectContainsPoint(btn.frame, point)) {
return btn;
}
}
return nil;
}
- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{
//1.獲取當前點
CGPoint curP = [self getCurrentPoint:touches];
//2.判斷當前點在不在btn上
UIButton *btn = [self btnRectContainsPoint:curP];
if (btn && btn.selected == NO) {
btn.selected = YES;
//保存選中的按鈕
[self.selectBtnArry addObject:btn];
}
}
- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{
//1.獲取當前點
CGPoint curP = [self getCurrentPoint:touches];
self.curP = curP;
//2.判斷當前點在不在btn上
UIButton *btn = [self btnRectContainsPoint:curP];
if (btn && btn.selected == NO) {
btn.selected = YES;
//保存選中的按鈕
[self.selectBtnArry addObject:btn];
}
//重繪
[self setNeedsDisplay];
}
- (void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{
NSMutableString *str = [NSMutableString string];
//1.取消所有選中的按鈕
for (UIButton *btn in self.selectBtnArry) {
btn.selected = NO;
[str appendFormat:@"%ld", btn.tag];
}
//2.清空路徑
[self.selectBtnArry removeAllObjects];
[self setNeedsDisplay];
//查看是否是第一次設置密碼
NSString *keyPwd = [[NSUserDefaults standardUserDefaults] objectForKey:@"keyPwd"];
if (!keyPwd) {
[[NSUserDefaults standardUserDefaults] setObject:str forKey:@"keyPwd"];
[[NSUserDefaults standardUserDefaults] synchronize];
UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"第一次設置密碼成功" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil, nil];
[alertV show];
NSLog(@"第一次輸入密碼");
}else{
if ([keyPwd isEqualToString:str]) {
NSLog(@"密碼正確");
UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"手勢輸入正確" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil, nil];
[alertV show];
}else{
NSLog(@"密碼錯誤");
UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"手勢輸入錯誤" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil, nil];
[alertV show];
}
}
//3.查看當前選中按鈕的順序
NSLog(@"選中按鈕順序為:%@",str);
}
- (void)drawRect:(CGRect)rect{
if (self.selectBtnArry.count) {
//1.創建路徑
UIBezierPath *path = [UIBezierPath bezierPath];
//2.取出所有保存的按鈕
for (int i = 0; i < self.selectBtnArry.count; i ++) {
UIButton *btn = self.selectBtnArry[i];
//當前按鈕是不是第一個按鈕
if (i == 0) {
//設置成路徑的起點
[path moveToPoint:btn.center];
} else {
//添加一根線到按鈕中心
[path addLineToPoint:btn.center];
}
}
//添加一根線到當前手指所在點
[path addLineToPoint:self.curP];
//設置線寬/顏色
[path setLineWidth:5];
[[UIColor whiteColor] set];
[path setLineJoinStyle:kCGLineJoinRound];
//3.繪制路徑
[path stroke];
}
}
- (void)layoutSubviews{
[super layoutSubviews];
CGFloat x = 0;
CGFloat y = 0;
CGFloat btnWH = 75;
int column = 3;
int margin = (self.bounds.size.width - (column * btnWH)) / (column + 1);
int currentColumn = 0;
int currentRow = 0;
for (int i = 0; i < self.subviews.count; i ++) {
// 求當前所在的列
currentColumn = i % column;
// 求當前所在的行
currentRow = i / column;
x = margin + (btnWH + margin) * currentColumn;
y = margin + (btnWH + margin) * currentRow;
UIButton *btn = self.subviews[i];
btn.frame = CGRectMake(x, y, btnWH, btnWH);
}
}
@end
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
Framework中實現OC和Swift的混編方案
這篇文章主要為大家介紹了Framework中實現OC和Swift的混編方案詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-01-01
iOS App開發中UIViewController類的使用教程
UIViewController是iOS中控制視圖的關鍵所在,這里我們將針對UIViewController的聲明周期與主要屬性和方法,來總結iOS App開發中UIViewController類的使用教程2016-07-07

